Improvement in hydrogen storage performance of Mg by mechanical grinding with molten salt etching Ti3C2Clx

Mg-based materials are currently a hot research topic as hydrogen storage materials due to their considerable theoretical hydrogen storage capacity. However, the kinetic performance of hydrogen absorption and desorption of Mg is too slow and requires high temperature, which seriously hinders the application of this material. MXene is a new type of two-dimensional material with significant role in improving thermodynamics and kinetics. In this experiment, a two-dimensional layered MXene containing Cl functional group was prepared by molten salt etching using the Ti-containing MAX phase as the raw material. Then different ratios of Ti₃C₂Cl_x were uniformly dispersed onto the surface of Mg by high energy ball milling. The samples were characterized by hydrogen absorption and desorption kinetics, SEM, XRD, XPS, and DSC to investigate the effect of Ti₃C₂Cl_x on the hydrogen absorption and desorption performance of Mg. The onset hydrogen absorption temperature can be reduced to room temperature and the hydrogen release temperature is reduced by 200 ​°C by doping Ti₃C₂Cl_x. And there is also 5.4 ​wt% hydrogen storage in the isothermal hydrogen absorption test at 400 ​°C. The results of DSC demonstrate that the E_a of Mg+15 ​wt% Ti₃C₂Cl_x was reduced by 12.6% compared to pristine Mg. The ΔH is almost invariable. The results of XPS show that the presence of multivalent Ti promotes electron transfer and thus improves the conversion between Mg²⁺/Mg and H⁻/H. This study provides a guideline for further improving the hydrogen absorption and desorption performance of Mg-based hydrogen storage materials.     

液相浸渗中纤维非润湿性的处理

纤维与金属液的非润湿性是液相浸渗制造纤维增强金属基复合材料的主要障碍之一。实验发现纤维的非润湿性使其在自然排布时的浸渗缺陷必须存在。通过提高液相浸渗压力可以改善复合材料的浸渗效果,但仍有细小的浸渗缺陷必然存在。通过提高液相浸渗压力可以改善复合材料的浸渗效果,但仍有细小的浸渗缺陷无法消除,采用颗粒与纤维的混杂使纤维丝相互分离,消除了充填“死角”而使纤维束内完整充填并且均匀分布,提高浸渗压力和混杂预制     

Progress in magnetic couple system of nitroxidemetal complexes

Metal_radical method is an effective approach to synthesizing magnetic molecular materials. With the development in decades, the study of nitroxide_metal complexes has made great progress in model, theoretical treatment and design of molecules. Several mechanisms of the metal_radical magnetic coupling are discussed. Molecular magnetic project of nitroxide_metal complexes has made fruitful achievements, but crystal magnetic project is difficult to be controlled, and it is a challenge to chemists. The studies on nitronyl nitroxide_metal complexes are summarized. At present, there are three major approaches to increasing the T c of the metal_radical compounds: (ⅰ) Searching for nitronyl nitroxide ligands that can yield 3_D ferro_ or ferrimagnetic structures; (ⅱ) decorating the structure of radicals with the aim to enhance the coordinate capability of radicals; (ⅲ) grafting polynitroxide radicals as a versatile bridge. The third approach, namely searching for polynitroxide ligand, will serve as a hopeful strategy for exploring higher T c radical molecule_based magnets.     

血清金属元素含量与缺血性脑血管病相互关系探讨

对缺血性脑血管病（ＩＣＶＤ）患者血清Ｚｎ、Ｃｕ、Ｃｒ、Ｍｇ元素进行测定,结果表明患者血清Ｃｕ、Ｃｒ、Ｍｇ含量比对照组低,Ｚｎ含量和Ｚｎ／Ｃｕ比值比对照组高,测定患者Ｚｎ／Ｃｕ比值较测定单一元素Ｚｎ、Ｃｕ更有意义。     

复合材料设计的原理与实践

对复合材料设计的原理与实践进行简要介绍,对其研究现状与发展趋势进行评述．重点在于工程结构复合材料,特别是航空航天领域应用的先进复合材料,重点是仿生与机敏材料设计,材料设计的目的是实现材料性能优化．     

用于智能材料与结构的NiTi丝的电阻特性研究

研究了拉伸过程中,ＮｉＴｉ形状记忆合金丝的应变与电阻的关系．结果表明,对于初始组织为马氏体的ＮｉＴｉ丝,在拉伸过程中,电阻与应变之间成线性关系．对于初始组织为奥氏体或奥氏马氏体两者混合的ＮｉＴｉ丝,当发生应力诱发马氏体相变后,曲线的斜率降低,相变前后电阻－应变保持线性关系．对于初始组织含有Ｒ相组织的ＮｉＴｉ丝,在拉伸过程中,电阻的变化规律较为复杂,取决于初始组织中各相的比例和温度．在卸载阶段,当没有相变过程发生时,电阻－应变之间呈线性关系;当有相变过程发生时,电阻－应变曲线的斜率会发生改变．     

Weibull分布和极值分布场合下简单步进应力加速寿命试验的最优设计

产品的加速寿命试验被用来较快地获得关于产品寿命分布的信息.本文研究了Weibull分布和极小值分布下简单步加试验的最优设计问题.为解决Nelson折算法对极小值分布的数据处理产生特殊情况的问题,作者应用近年来一些新的研究成果,将位置-尺度分布中的尺度参数设为随应力变化的量进行最优设计.给出一实例,并将其推广到更一般的形式.     

晋江市潮间带底质,生物体中重金属含量及其分布特征

研究福建省晋江市潮间带底质、生物体内重金属含量的分布特征及其主要影响因素．结果表明：表层底质重金属除总Ｈｇ之外,Ｃｕ、Ｐｂ、Ｃｄ和总Ｃｒ含量在河口、半封闭海湾明显高于紧临台湾海峡的海湾及开敞海区,并且,近年来底质的这些重金属含量大多数呈递增趋势;底质的重金属除总Ｈｇ之外,其他的含量都与底质类型及有机质含量有较好的相关性;３种经济贝类对重金属的富集能力分别为：牡蛎,缢蛏和蛤对Ｃｕ的富集系数分别为ｎ×１０４,ｎ×１０３和ｎ×１０３;３种贝类对Ｐｄ和Ｃｄ的富集系数均为ｎ×１０２．     

纳米级二氧化硅玻璃粉的制备及其特性

采用正硅酸乙脂为前驱物,用溶胶－凝胶法制备纳米级二氧化硅（ＳｉＯ２）粉,分别用Ｘ射线衍射仪、透射电子显微镜、红外光谱仪、差热扫描量热分析仪和白度测试仪对凝胶粉随温度变化的特征进行了分析测试．结果表明干凝胶在１２００℃热处理１ｈ仍是无定型的ＳｉＯ２粉,其粒度大小为４０ｎｍ左右,白度为９２．１％．     

用铁砂研制铁氧体电波吸收材料

以铁砂为原料制备一种尖晶石型铁氧体电波吸收材料,在７－１２ＧＨｚ范围,发现有两个吸收峰,吸收量在９－１３ｄｂ;将铁氧体吸收体和铁砂吸收体组成复合电波吸收材料,亦有两个吸收峰,一峰向低频区偏移,吸收量增至１４．５ｄｂ;以复合吸收体为基础材料,在其中添加六角铁氧体和稀土元素,可改变吸收峰位置,提高吸收量,最大可达２７ｄｂ。