Quantitative genetic models of sexual selection

Summary Quantitative genetic models of sexual selection have disporven some of the central tenets of both the handicap mechanism and the sexy son hypothesis. These results suggest that the good genes approach to sexual selection may generally lead to erroneous results.Runaway sexual selection seems possible under a wide variety of circumstances. Quantittive genetic models have revealed runaway processes for sexually selected attributes expressed in both sexes and for attributes of parental care. Furthermore, the runaway could occur simultaneously in a series of populations that straddle an environmental gradient. While the models support the feasibility of runaway processes, empirical studies are needed to evaluate whether runaways actually happen. Estimates of critical genetic parameters are particularly needed, as well as measures of natural and sexual selection acting on the same population.The models also show that sexual selection has tremendous potential to produce population differentiation, particularly in epigamic traits. Differentiation is promoted by indeterminancy of evolutionary outcome, transient differences among populations during the final slow approach to equilibrium, sampling drift among equilibrium populations, and the tendency of sexual selection to amplify geographic variation arising from spatial differences in natural selection. Recent work with two- and three-locus models of sexual selection has produced results that parallel the results of the polygenic models^36–38,58. Thus the feature of indeterminate equilibria (outcome dependent on initial conditions) is common to both types of model.     

A new semisynthetic ergot peptide alkaloid: DCN 203-922

Summary We report the synthesis, stereochemistry and preliminary pharmacological evaluation of DCN 203-922, a novel ergot alkaloid of the cyclol type, which contains in its peptide moiety the uncommon amino acid L-allo-isoleucine.Part of this paper was reported by this author at the Herbstversammlung der Schweizerischen Chemischen Gesellschaft, Bern, in October 1986.     

稀土高碳当量灰口铸铁组织与性能的研究

本文研究了利用稀土合金改善高碳当量灰口铸铁质量的可能性,稀土合金对高碳当 量灰口铸铁组织和性能影响的规律,以及稀土夹杂物在铸铁各相中分布的规律．发现了 稀土合金加入量与铸铁的机械性能之间明显的对应关系——“双峰值效应”。对稀土高 碳当量灰口铸铁的某些高温机械、物理、化学性能进行了研究。结果表明稀土合金加入 到高碳当量灰口铸铁中以后能净化铁水,改善组织,并提高其性能．     

A major metabolite of Δ1-tetrahydrocannabinol reduces its cataleptic effect in mice

Summary The results described here demonstrate that THC-induced catalepsy in mice can be substantially inhibited by the prior administration of ¹-THC-7-oic acid, the major metabolite of THC in most species including humans. This raises the possibility that the intensity and duration of action of THC may depend to a large degree on the levels of this metabolite at the sites of action.We thank the National Institute on Drug Abuse for supporting this project by grants DA-02043 and DA-02052 and for supplying all of the cannabinoids. One of us (S.B.) is also the recipient of a Research Scientist Award from NIDA. We are grateful to Kristen Carlson and Thomas Honeyman for helpful suggestions in preparing this report.     

弯曲铝合金方管的轴压性能试验研究

为研究带初弯曲度铝合金方管的轴压承载力,完成了8个试件的轴压稳定性试验,并建立了与试验条件一致的有限元模型。通过对比试验和有限元分析结果验证了有限元模型的可靠性。结果表明,带有较大初弯曲度铝合金方管的破坏模式为整体弯曲失稳。最后,根据有限元分析结果拟合得到较大初弯曲度铝合金方管的整体稳定系数计算式,并将拟合计算式结果和数值分析结果及试验结果进行对比,验证了计算式的正确性。     

电子束熔化成形与锻造Ti6Al4V合金的腐蚀行为对比研究

本工作采用电化学工作站研究了电子束熔化技术（EBM）成形TC4样品和传统锻造TC4在3.5wt% NaCl溶液中的电化学腐蚀行为. 结果表明EBM成形TC4样品的非平衡微观结构使其与传统锻造的TC4相比,表现出不同的耐腐蚀性. EBM成形TC4样品与锻件TC4相比,EBM成形样品不同平面存在耐蚀性差异,而且EBM水平面大于锻件,EBM垂直面小于锻件. EBM成形TC4样品垂直面出现的腐蚀性能的各向异性主要是β柱状晶导致的. 在腐蚀的过程中,点蚀优先发生在α晶界,因为晶界能量较高,形成多孔的钝化层. 本项工作有助于丰富增材制造制备TC4合金在航空钛合金领域的腐蚀性能研究.     

震区中小跨径桥梁墩柱配筋率取值范围

为研究配筋率对钢筋混凝土桥梁延性抗震性能的影响,并在不同设防烈度对主筋配筋率的合理取值进行细分。以钢筋混凝土桥梁为研究对象,通过拟静力模型试验与有限元数值分析的方法,研究竖向钢筋(主筋)配筋率对桥墩延性的影响,提出典型桥墩的多级性能水平量化指标;并探究在氯离子侵蚀的恶劣环境下,不同配筋率对桥梁抗震性能所带来的影响,从而对氯离子侵蚀环境下的震区中小跨径桥梁墩柱配筋率取值范围提供参考建议。结果表明：考虑氯离子侵蚀作用下的恢复力模型能够较好地反映刚度的退化特性,墩柱的最佳配筋率取值范围为1.11%～2.72%;当加速度为0.3g(g为重力加速度)时,仅从配筋率的角度已无法满足墩柱的损伤指标,建议采用减隔震体系进行抗震设计,如采用延性体系时配筋率不得小于2.64%。研究结果可为中小跨径连续桥梁抗震设计提供参考。     

高岭土负载绿色合成纳米铁的制备及其对孔雀石绿和铅离子的去除性能研究

红背桂树叶提取物绿色合成铁纳米颗粒（Fe NPs）在水环境修复领域具有很高的应用潜力。但由于Fe NPs存在团聚、易氧化等不稳定因素,在去除污染物时抑制了反应活性。为了解决这一问题,使用一步法制备了高岭土负载Fe NPs （K-Fe NPs）,并系统地检测了其对孔雀石绿和Pb²⁺混合污染物的去除反应活性。采用X射线衍射（XRD）和傅里叶红外光谱（FTIR）对Fe NPs、高岭土和K-Fe NPs进行表征和分析。3种材料对比实验结果表明,K-Fe NPs对单独的孔雀石绿和Pb²⁺的去除效率（99.10%和93.41%）优于Fe NPs（93.67%和85.33%）和高岭土（32.54%和12.50%）。此外,K-Fe NPs经过4次重复循环对孔雀石绿和Pb²⁺的去除率仍分别为74.02%和55.48%。结果表明,K-Fe NPs在染料和重金属离子复合污染修复领域具有一定应用前景。     

测长仪器数字化微机化改造中的精度保证

本文介绍了测长仪器数字化微机化改造中的精度保证方法:标尺倾斜调整法和计算机软件补偿法。作者将这些方法应用于万能工具显微镜的改造中,获得了满意的效果。该方法简单有效,而且亦适用于新测长仪器的制造。文中还对测长标尺的制造提出了“标尺刻度间距的公差带应正向单向布置”的指导性意见。