ePTFE人工血管管壁结构及其体外性能的试验研究

对国内外两组膨体聚四氟乙烯(ePTFE)人工血管从管壁结构、理化性能和生物力学性能进行对比研究.通过试验研究两组人造血管管壁的宏观及微观结构、表面润湿性、结晶度和融熔温度、周/轴向拉伸、顶破拉伸以及手术线固位强力,对比两组样品的性能差异,并分析了导致差异的可能原因,讨论了管壁结构、理化性能与力学特性之间的关系.研究结果表明,国产和进口ePTFE人工血管试样均为双层结构,两者都有良好的疏水性表面和抗水渗透性.但进口试样具有更加规整均匀的节点和纤维形态结构,有利于人工血管的生物耐久性.     

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiC_xN_y–TiB_2)/Ni cermets

In-situ(TiC_xN_y–TiB_2)/Ni cermets with 70 wt%TiC_xN_y–TiB_2 were successfully fabricated by combustion synthesis and hot pressing sintering in Ni-Ti-B_4C-BN powder systems.The microstructures,density,compressive properties,and hardness of the TiC_xN_y–TiB_2/Ni cermets with the addition of 0–8 wt%Cr/Mo to the Ni-Ti-B_4C-BN powder systems were compared and analysed.The results showed that the ceramic particles distributed uniformly in the cermets,and the size of the ceramic particles reduced with the Cr/Mo addition.Both Cr and Mo addition can improve the hardness,compressive properties,and fracture strains of the cermets.The hardness,compressive strength,and fracture strain of the(TiC_xN_y–TiB_2)/(Ni+Cr)cermets increased from 1561 HV,2.94 GPa,and 2.9%to 1864 HV,3.65 GPa,and 3.4%,respectively when the Cr content increased to 5 wt%.The hardness and compressive strength of the(TiC_xN_y–TiB_2)/(Ni+Mo)cermets increased from 1561 HV and 2.94 GPa to 1902 HV and 3.43 GPa,respectively when the Mo content increased to 8 wt%.The cermets with Cr had better compressive properties than the cermets with Mo.     

循环应力对储气库岩石微观结构及力学性质影响数值模拟

针对储气库循环注采过程中循环应力对储气库岩石产生疲劳损伤的问题。利用颗粒离散元法建立岩心真三轴数值模型,根据岩心室内试验标定数值模型参数,然后对数值模型进行多周期等幅值轴向循环应力加载,研究循环应力对储气库岩石微观结构及力学性质的影响。结果表明:循环应力加载过程中,模型内生成的无黏结接触数量和微裂缝数量逐渐增多,而生成位置受原始裂缝控制明显,模型孔隙度逐渐减小,且模型内无黏结接触数量、微裂缝数量和孔隙度的变化速率均呈递减趋势;相同应力水平下模型侧向应变和轴向应变均增大,但侧向应变占主导地位;模型弹性模量逐渐降低,而模型泊松比和损伤量逐渐增加,且模型弹性模量、泊松比和损伤量的变化速率均呈递减趋势。     

A357履带板的半固态触变成形工艺研究

采用半固态触变成形实验,对履带板件进行了模具设计、成形工艺参数制定,成功制得A357铝合金履带板件。并通过拉伸试验和微观组织观察,研究了T6热处理工艺对零件的力学性能和微观组织的影响。试验结果表明:经过T6热处理工艺,过饱和的基体中不断析出强化相Mg₂Si并高度弥散分布在晶粒内部与晶界处,零件的强度得到较大提高。     

Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method

In recent years, graphene has attracted considerable research interest in all fields of science due to its unique properties. Its excellent mechanical properties lead it to be used in nano-composites for strength enhancement. This paper reports an Aluminum–Graphene Nanoplatelets(Al/GNPs)composite using a semi-powder method followed by hot extrusion. The effect of GNP nano-particle integration on tensile, compressive and hardness response of Al is investigated in this paper. It is demonstrated that 0.3 wt% Graphene Nanoplatelets distributed homogeneously in the matrix aluminum act as an effective reinforcing filler to prevent deformation. Compared to monolithic aluminum(in tension), Al–0.3 wt% GNPs composite exhibited higher 0.2% yield strength(+14.7%), ultimate tensile strength(+11.1%) and lower failure strain( -40.6%). Surprisingly, compared to monolithic Al(in compression), Al–0.3 wt% GNPs composite exhibited same 0.2% compressive yield strength and lower ultimate compression strength(- 7.8%),and lower failure strain(- 20.2%). The Al–0.3 wt% GNPs composite exhibited higher Vickers hardness compared to monolithic aluminum(+11.8%).Scanning electron microscopy(SEM), Energy-Dispersive X-ray Spectroscopy(EDS) and X-ray diffraction(XRD) were used to investigate the surface morphology, elemental percentage composition, and phase analysis, respectively.     

机械制浆过程磨机负荷内模PI控制

针对双盘磨机在运行过程中具有大滞后、大惯性及非线性等特点,内模控制作为一种先进控制策略,鉴于其对过程模型精度要求不高等优点,提出了一种基于内模控制原理的PI控制方法,该方法设计的控制器仅有一个可调参数,且通过最大灵敏度指标实现其整定,有效避免了控制器整定的复杂性与随机性.仿真结果表明,与常规PID控制相比,所提方法可有效减小模型参数变化及各种干扰对系统性能的影响,满足机械制浆生产过程对控制器性能的要求,保证磨机安全稳定运行,实现了磨机负荷的稳定化控制,为机械制浆过程综合自动化系统的实施奠定基础.     

朝鲜崖柏生境及高生长规律分析

采用标准地调查法测定朝鲜崖柏的土壤特征、林下植被和高生长规律.结果表明:朝鲜崖柏生长于土层较薄且呈弱酸性的山地暗棕壤,不同标准地林下植被差异明显;不同标准地朝鲜崖柏树高的年生长量均呈逐年下降趋势.     

Preparation and Mechanical Properties of a Novel Textile Pad for Wound Debridement

Various types of wound debridement approaches are currently available in clinical practice such as autolytie, enzymatic. biodebridement, mechanical, and surgical debridemenl techniques. A critical look at these various options can explain their potential but also their limitations. In this study, a novel textile pad, which is composed of polyester filaments on the fleecy side and a bioeompatible coating on the opposite side, was made to provide a safe, inexpensive, easier and especially more efficient debridement process that can be used in all healthcare settings by all healthcare practitioners. Eighteen kinds of samples were prepared with different pile density, ground yarn count and coating amount. Dimensional morphology, stitch density, mass per unit area and mechanical properties were investigated to study the intrinsic relationship of structure and properties of textile pad for wound debridement. Results showed that tensile strength and suturing strength at piped site increased obviously with the increment of ground yarn count, while the amount of coating could also have a slight impact on these two properties. However, compressive load was mainly affected by pile density, with no obvious relation to ground yarn count and coating amount.     

关于机电设备管理问题的分析

机电设备的安全管理是企业中最经常、最大量的安全管理活动,也是企业实现安全目标的基本保证,质量达标是安全生产的保障。因此,加强机电设备监管有着重要的意义。文章就目前机电设备安全管理存在的问题进行了分析。     

多变量分数阶捕食模型和传染病模型的Mittag-Leffler稳定性(英文)

讨论了多变量分数阶捕食模型和分数阶狂犬病模型稳定性.利用分数比较原则,可以得到这两个系统Mittag-Leffler稳定.