受约聚甲醛的热力学性质研究

采用旋转异构体模型，将受约束聚甲醛(POM)长链等效为约束在圆柱体内，用完全计算法研究受约的聚甲醛链的热力学性质，发现体系的配分函数Z与链长N存在关系：lnZ=aN b，其中N也代表键的数目，a和b仅与温度T和无限长圆柱体的直径D有关．这种方法为研究多链体系的热力学提供一种近似方法。     

减少化验次数的一个优化模型

依据数学理论证明在一定条件下，可以减少化验次数；并给出了选择方法；建立了一个减少化验次数的优化模型。     

变系数Helmholtz方程本征值问题差分近似的六阶校正法

给出了变系数Helmholtz方程的六阶高精度校正法。此校正过程几乎不增加工作量，而校正后精度比未校正提高了四阶，并能提供后验误差估计。同时，对于常系数Helmholtz方程，给出了八阶校正格式。     

INFLUENCE OF POLYMER CHARACTERISTICS AND MELT-SPINNING CONDITIONS ON THE PRODUCTION OF HIGH RANDOMNESS 60PHB/PET THERMOTROPIC LIQUID CRYSTAL COPOLYESTER FIBER

Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible 'H-NMR spectrometer. High tenacity, high module fiber is prepared by melt spinning in liquid crystal phase. The effect of molecular weight, shear rate, temperature as well as spinning drawn ratio on the mechanical behavior of 60PHB / PET copolyester fiber are shown that, lower shear rate (2~ 10 s~(-1)), higher temperature melting (300℃ ), lower temperature spinning (280℃ ) and higher molecular weight are favourable to the increase of the fiber mechanical properties. With the variance of drawn ratio, fiber mechanical property has a transition point due to traversion from shear-orientation to drawn-orientation. The copolyester fiber has high crystallinity, high orientation at the crystalline region, high chain orientation and high regular fibrillar structure.     

实现汽车发动机可变气门相位的新方法

介绍一种用于双顶置凸轮轴式发动机的采用两级谐波传动的新型进气凸轮轴调相机构。它由输入刚轮（正时带轮）、柔轮、输出刚轮（与进气凸轮轴联接）、固定波发生器、动波发生器和步进电机等组成。用步进电机驱动动波发生器可改变输出、输入刚轮的相对位置，从而改变进气相位。该机构能在很大角度范围内，以小步长实现多级调相，轴向尺寸小，转动惯量小，控制驱动功率小。２００ｈ试验表明，该机构工作可靠，能够准确地根据控制信号进行凸轮轴的调相。     

白兰瓜子叶和幼叶的组织培养

白兰瓜子叶和幼叶作为外植体直接诱导再生芽。讨论了不同种类和不同水平激素的作用、子叶上不同位置组织的差异、子叶与幼叶诱导频率的不同等。试验结果表明:生长素类激素和较高浓度的细胞分裂素激素类使子叶产生白色疏松的愈伤组织,MS+BA0.5ppm+Kt0.5ppm为诱导再生芽的最适培养基;子叶上不同部位组织的诱导率呈显著差异,近生长点端→远生长点端,诱导率由24.4％急剧下降至0％:幼叶的诱导率为27.4％,明显高于子叶9.7％的诱导率;不定芽的生根需极低浓度的Kt(0.01—0.05ppm)或不附加任何激素。     

HPMBP和N_(503)协萃钯(Ⅱ)的研究

研究螫合萃取剂1—苯基—3—甲基—4—苯甲酰吡唑酮—5(HPMBP)与酰胺型革取剂N_(503)氯仿溶液从硝酸介质中协萃钯(Ⅱ)的热力学行为。在30℃、pH=1.70条件下,萃取剂浓度与分配比的关系式可表达为lgD′=2.948lg[HPMBP]_((o)) 6.645,lgD″=0.9809lg[N_(503).HNO_3]_((0)) 2.796。温度与分配比的关系表达为lgD=424.923/T-0.3088。测得协革平衡常数k=34.67,焓变△H=-8.316kJ.mol~(-1),自由能变△G=-8.932kJ.mol~(-1)和熵变△S=2.036J.mol~(-1).K~(-1).     

泡沫的持液量研究

泡沫的持液量（ｈ，ｍｇ／ｃｍ３）是泡沫的基本特性之一．本文对形成泡沫的起泡剂浓度、增粘剂浓度、气体流量和温度等因素对Ｈ的影响及变化规律作了研究，并对Ｈ与泡沫表观粘度和泡沫半衰期的相互关系作了描述，对泡沫的实际应用具有一定的指导意义．     

取值于Banach空间中的（E1）囿变函数

引入取值Ｂａｎａｃｈ空间中的（Ｅ１）囿变函数的概念，并讨论它与强、弱囿变函数之间的关系．     

A High Speed Detection Scheme for Point Targets in a Multitarget Environment

The purpose of this paper is to develop a high speed detection scheme for moving and / or stationary point targets in a multitarget environment as registered in an IR image sequence. An iterative approximate 3-D line searching algorithm based upon the geometric representation of lines (for non-maneuvering targets in space) in a 3-D space is derived. The convergency of the algorithm is proved. An analysis is performed of the theoretical detection performance of the algorithm. The statistical experiment results show high effectiveness and computational efficiency of the algorithm in the case of low SNR. The idea may be employed to satisfy the real-time processing requirement of an IR system.