软件系统可靠性分析的Vague集方法

本文介绍了软件状态不仅有正常、失效状态，还有文中提到的失常状态，因此引入Vague集分析软件系统可靠性，在顺序和选择结构系统中通过三角形的Vague集方法运算证实，该方法可以更灵活、更智能有效地分析软件系统可靠性，建立成熟的人性化模型，使软件系统更加稳定。     

一类特殊的LF-网空间

本文研究了LF-网空间和它的几个子空间类,考虑了LF-k-网空间与几类广义度量化空间的关系,并且给出了LF-k-网空间的一个等价条件.     

火焰加热温度对6005A铝合金焊接接头性能的影响

针对铁路交通车辆用 60 0 5A铝合金型材的焊接变形 ,采用火焰加热方法进行矫正·研究了火焰加热温度对焊接接头抗拉强度、硬度及微观组织结构的影响·实验结果表明 ,当加热温度低于 2 0 0℃时 ,焊接接头的抗拉强度、硬度未降低 ,热影响区内软化区的显微组织未发生明显变化 ;当加热温度超过 2 0 0℃时 ,焊接接头的硬度发生较明显降低现象 ,软化区范围加宽·软化区材料性能下降的原因是在火焰加热的热输入过程中过热导致该区晶粒粗大     

基于粗集与PCNN的图像预处理

研究了如何将粗集(Rough Set)与脉冲耦合神经网络(PCNN-Pulse Coupled Neural Network)相结合，对被噪声污染的图像进行对比度增强处理，使图像清晰，从而便于后续的处理。同时，提出了基于粗集与PCNN的图像增强算法。计算机仿真结果表明，使用基于粗集与PCNN的图像增强算法，可有效地对被噪声污染的图像进行图像增强，减少图像噪声，增加图像对比度，使图像更加清晰，且图像增强的结果优于常规的方法。     

多值依赖无分裂覆盖问题的研究

基于函数依赖规范化理论及多值依赖基本概念，给出了多值依赖的分裂、无分裂多值依赖集等定义，提出了满足无分裂多值依赖集的良好特性，以及无分裂多值依赖集的判定算法，并且提出分裂多值依赖集存在无分裂覆盖满足的条件及其算法．这对于多值依赖集化简、规范化设计和无环数据库设计提供了理论基础．     

浅谈对《中学体育与健康课程标准》的思考

《中学体育与健康课程标准》出台,中学体育教育从性质、价值定位等方面发生了很大变化,它要求教师从观念到教法均要与时俱进,但对在实施过程能否顺利推进,笔者提出了一些问题。     

梯级水库联合理想补偿调节研究

针对梯级水库群防洪调度问题，建立了一个梯级联合优化调度模型，并对此模型提出了一种联合理想补偿调节方式，通过对白山和丰满水库联合调度计算可得到良好的效果。     

光滑流形在(Z2)2作用下信息为{(2,2,0),(2,0,2),(0,2,2)}的上协边类

设(Z2)^2作用于光滑闭流形M^n，其不动点集的法丛的信息为P＝{(2，2，0)，(2，0，2)，(0，2，2)}，Jn^4，2(P)是有代表元M^n且具有上述性质的n维上协边类[M^n]构成的集合．作者通过构造上协边环M0n的一组生成元决定了Jn^4，2(P)的群结构．     

Present-Day crustal deformation field in China continent inverted from GPS observations, earthquake moment tensor and quaternary fault slip rates

Based on the bi-cubic Bessel spline function method, we have inverted the present-day crustal horizontal velocity field and deformation field in China continent by combining with 410 GPS observations, 327 seismic moment tensors of earthquakes and fault slip rates in China and its neighboring areas, and considered the geological and geophysical parameters at the same time. The results reveal that the crustal movement mostly takes on compression in SN-NE direction and extension in EW-NW direction in China continent. The continent is rotating southeast and takes on a clockwise rotation image from the west to the east, particularly in the southeast of Tibet and Chuan-dian area. Different blocks have different deformation in China continent. The south China, Ordos and Northeast block have good integrity.The deformation in the western part of China is obviously stronger than that in the eastern part. The strong strains are focused on the Himalaya, east Tibet,west Tian Shan and Chuandian block etc. The deformation at the joint of blocks is stronger than that within the blocks. The China continent deformation not only has the strike-slip faulting and extrusion feature but also has the crustal shortening and thickening feature.     

Identification and mapping of quantitative trait loci controlling cold-tolerance of Chinese common wild rice (O. rufipogon Griff.) at booting to flowering stages

Cold injury is an important limitation of rice production. Therefore, screening for cold-tolerant genetic resources and the development of highly cold-tolerant cultivars is crucial for higher yield potential and stable yield of rice. There have been several reports on the genetic analysis and QTL mapping of the cold-tolerance at the booting stage. Toriyama et al.[1,2] and Futsuhara et al.[3,4] reported that 4 or more genes were involved in the cold-tolerance. Several QTLs at the booting sta…