光电转换体系太阳能聚集器

In standard P-V systems, the high cost and low quantum efficiency of silicon cells has held back widespread adoption of this technology for decades. To generate electrical power from solar energy in a cost effective way, most methods require the concentration of the sunlight in order to increase the efficiency of energy conversion. Most systems use parabolic mirrors to focus sunlight to either a line （trough systems） or a small volume （dishes）. One of the reasons solar power still remains little utilised, is the high cost of the collection systems. Light focussing devices using reflection usually take the form of a curved rein＇or. In contrast, this paper describes the new design of a device consisting of an array of small angled reflecting m/trot facets located in a planar form. The three dimensional angle of each facet in the array is a function of its position in the array, and is calculated to be such that for a parallel beam striking the array, each facet will reflect the light in such a way as to form a focal point region.     

稻砂土吸附铜镍铅砷能力的比较

通过对砂壤水稻土中Cu,Ni,Pb,As4种元素的单元及复合吸附试验,表明其吸附热力学符合Freundlich方程,吸附能力为Pb Cu>As>Ni.共存元素对土壤吸附某一元素的能力影响不大;用Langmuir方程粗略地估算出这4种元素在土壤中的化学容量.     

咪唑季铵盐棉纤维制备及其对DOSO_3~-吸附性能研究

本文用20%的NaOH溶液对棉纤维的预处理、醚化、接枝合成工艺进行了优化;在不同条件下,研究了咪唑季铵盐棉纤维对DOSO~-_3的吸附性能.结果表明,用NaOH预处理棉纤维后,在适当的条件下醚化棉纤维素,再用氢氧化钠作催化剂,按3 g环氧基纤维素醚与10 mL甲基咪唑配比接枝,得到白色味唑季铵盐纤维素.用咪唑季铵盐棉纤维对DOSO~-_3进行吸附,吸附率可达91.8%,吸附效果令人满意.     

苯在Ru-Zn/Ru（0001）合金表面上的吸附——密度泛函研究

为了理解苯在Ru-Zn合金催化剂上的部分加氢催化机理,采用密度泛函方法对苯在Ru-Zn/Ru（0001）面上的吸附进行理论研究。计算结果表明,当苯的碳原子或者共轭双键直接位于表面Zn原子的atop位时,其吸附热较Ru（0001）面上的类似吸附状态下降约60%.Zn原子与苯环C原子之间的排斥作用导致苯环的成键轨道与表面Ru原子的价层轨道之间的空间对称性下降,从而不利于苯与合金表面的键合。当吸附位离开Zn原子时,邻近Zn原子对于苯的吸附基本没有影响。     

Therapeutic applications of bone marrow-derived stem cells in liver transplantation for end-stage liver diseases

Today, liver transplantation (LT) is the only established treatment for end-stage liver diseases. The de- velopment of LT, including OLT, cadaveric LT, split LT, living donor LT (LDLT), brings hopes to patients with these diseases. However, increasing donor shortage, rejection and life-long immunosuppression with its side effects are the major limitations of this therapy strategy. Bone marrow-derived stem cells (BMDSCs) are capable of differentiating into hepatocyte-like cells and contribute to liver injury repair. The microenvironment of liver injury caused by rejection, ischemia/reperfusion, loss of liver mass, recurrence of HCV and "small-for-size syndrome" after LT can attract a variety of bone marrow-derived stem cell population to the peripheral circulation and then migration to the injury liver to promote the hepatic function restoration. Additionally, BMDSCs can also take part in the functional regeneration of living donor liver after LDLT. This participation in liver regeneration may be associated to the interac- tion between SDF-1and its receptor CXCR4, involving HGF, IL-8, MMP9, and VEGF/VEGFR-2. BMDSC with its bio-characteristics could maintain the allograft tolerance from different angles and in different ways. In conclusion, BMDSCs transplantation, as a new assistant therapeutic method for LT, will ex- pand the space of LT, and provide more survival opportunities for the patients suffering liver diseases in the future.     

氯在Cu(100)面上的吸附及其对氧共吸附的影响的电子能谱研究

利用UPS、XPS、AES、△φ和热脱附等方法,研究了室温、低分压下氯在Cu(100)面上的吸附行为以及它对氧共吸附的影响。氯解离化学吸附在铜表面上,其吸附过程包括初始快速吸附,然后缓慢增加至饱和两个步骤。吸附引起铜表面轻微氧化,但表面没有重排,即使升温氯原子也没有进一步向下扩散,热脱附的唯一产物是氯原子。室温下,氯的预吸附降低甚至完全阻止了氧的接续吸附;而预吸附氧至饱和也不会阻碍氯的接续吸附,氯的接续吸附促使氧原子进入体相和铜原子向表层扩散。     

298K毛吸附溴化烷基三甲铵的性质及自由能

用液 /固吸附计量置换模型 ( SDM- A) ,研究了 2 98K羊毛纤维吸附溴化烷基三甲铵阳离子表面活性剂 CTAB和 DTAB的吸附等温线 ,结果表明它们均遵从 SDM- A的线性作图关系 .用 SDM-A的线性参数βα 和 q/z很好地描述了碳氢链长及加盐效应对于吸附性质的影响规律 ,特别是能定量地描述加盐效应对于吸附同时具有的促进和抵消两种相反作用的程度 ,并用 SDM- A的热力学 ,由线性参数计算得到了不同体系的吸附亲和能 ΔGA,解吸能 ΔGD 及总过程的自由能 ΔGP.一个吸附体系中 ,ΔGA 为常数且为较大的负值 ;ΔGD 为随溶液体相浓度 c增大而增大的正值 ;ΔGP为与 lgc呈线性关系的较小的负值 .计算所得结果能很好地解释实验事实 ,并可从更深层次上揭示吸附机理 .     

"溶液吸附法测定活性炭比表面积"实验的改进

研究了吸附荆的颗粒度、吸附时间、吸附温度、原始溶液浓度对吸附平衡的影响，确定了新的实验条件：粒状活性炭破碎至60．100目；70℃恒温振荡0．5h后，再于室温振荡吸附1．5h；原始溶液的溶质质量分数为2％左右．改进后，提高了实验精密度，缩短了实验时间．     

我国最薄炉墙焦炉的设计、施工与生产

减薄炭化室炉墙是提高焦炉产量,节约能源,减少投资的重要途径之一。本文介绍我国厚80毫米炉墙焦炉的设计、施工与生产情况。     

铝电解过程控制信号的滤波与噪声解析模型的研究

将快速傅里叶变换技术和数字滤波器设计技术应用于铝电解过程控制信号的滤波与噪声解析模型中,在160kA中间点式下料预焙槽上的试验结果表明了模型的有效性。