仿生食品工程学发展中的若干问题

本文简要介绍了仿生食品工程学建立的意义、性质和目前研究的主要内容。结合仿生食品工程学的需要,引出大食品的概念,并把分形理论引入仿生食品工程学研究。     

脉冲示踪法实验误差分析

本文从理论和实验两方面分析了脉冲示踪法中脉冲时间、示踪剂输入和记录仪记录时间差、示踪剂纯度与用量和实验温度对反应器内物料停留时间分布和流动模型参数测定误差的影响,以便在实验中采取相应措施减小或消除误差,获得准确的实验结果。     

泥沙输移对长江中游水位抬升的影响

通过对长江干流宜昌至汉口河段及与洞庭湖区泥沙输移变化的综合分析,得到了三口分流分沙逐年减少是造成洞庭湖区淤积速率减小和螺山至汉口河段淤积速率增大的主要原因,也是造成长江干流监利至螺山河段水位逐年抬升、洞庭湖区的洪水调节能力大幅度下降的主要原因等结论．按照因势利导的治理原则,荆江及洞庭湖的近期治理策略应是淤积围垸减少河道淤积、疏浚河道、加固干堤．     

一种新的高距离分辨率脉压技术的研究

在频率进步雷达高距离分辨技术的荐,为解决压缩经的限制提出了在子冲引入线性调频体制的新型雷达波形。     

2,3-二羟基哌嗪与几种氨基化合物的缩合反应研究

由乙二胺与乙二醛的缩合物２,３－二羟基哌嗪,分别与甲酰胺、脲和乙二胺反应,制得２,４,７,９,１１,１４－六氮杂三环［８,４,０,０３,８］十四烷六盐酸盐四水合物（１）,２,５,７,９－四氮杂双环［４,３,０］壬－８－酮二盐酸盐－水合物（２）和２,５,７,１０－四氮杂双环［４,４,０］癸烷（３）。化合物１为未见文献报道的新化合物。化合物２的合成工艺条件优化后,反应得率与文献［１］相比有一定提高。化合物３的合成,由于将反应分为低温和高温两个缩合阶段,使反应得率提高到７７．５％。     

脉冲间隔调制信号的谱分析

采用静态逼近方法,求出非同步模拟脉冲间隔调制信号简单而物理概念明确的谱表示,并由实验结果确认．     

盐胁迫下灰绿藜叶片光合特性与叶绿体离子调节的研究

ＮａＣｌ处理后,灰绿藜整个叶片内Ｎ＾＋ａ和Ｃｌ＆－积累,但叶绿体内仅少量增加。叶绿体与叶片的Ｋ＾＋浓度都降低。     

Cloning, construction of prokaryotic expression vector and expression ofEscherichia coli cytosine deaminase gene

Cytosine deaminase gene ofEscherichia coli strain H-30 was cloned, and its initiation codon of ‘GTG’ was mutated to ‘ATG’ by PCR. Prokaryotic recombinant expression vector pBV220-CD was constructed. Clone with high enzyme activity were selected by detecting their specific activity of cytosine deaminase. 5-FC(5-FC, 5-fluorocytosine) could induce the lethal toxicity to cells containing active CD gene. DNA sequence analysis indicated that there were 16 altered bases and 5 of them resulted in the alteration of amino acids in predicted peptide by comparing DNA sequence of the clone H-30-CD-11 with high enzyme activity with CD gene reported in Gene Bank.     

Diamond synthesis from a system of chromium-carbide and Ni70Mn25Co5 alloy

In order to ascertain the mechanism of interaction between carbide and metallic catalyst and formation of diamond under high pressure and high temperature, and find a new method to synthesize diamond with special properties, it is necessary to investigate the reaction behavior of different carbides and metallic solvent_catalysts under high pressure and high temperature. A system of Cr-3C-2 powder and Ni 70Mn 25Co 5 alloy in weight ratio of 1∶6 was treated under 6 0 GPa and 1 500℃ for 20, 30 or 60 min respectively. X_ray diffraction of the samples indicated the Cr 3C 2 decomposed partially after high pressure and temperature treatment, and Cr 7C 3, Cr and diamond formed respectively. There was not any trace of graphite in the samples. The result suggested that the separated carbon atoms could form diamond directly without conversion process of graphite into diamond. The observation of SEI, WDX and EDX also showed that diamond crystals were synthesized in the system, which have perfect surfaces and shapes, with the average grain size of about 40 μm. The properties of the crystals are being investigated.     

Construction of High Level Expression Cell Lines of Erythropoietin *

Ｅｒｙｔｈｒｏｐｏｉｅｔｉｎ（ＥＰＯ）ｉｓｏｎｅｏｆｔｈｅｍｏｓｔｉｍｐｏｒｔａｎｔｒｅｇｕｌａｔｏｒｙｆａｃｔｏｒｓｄｕｒｉｎｇｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆｍａｍｍａｌｉａｎｅｒｙｔｈｒｏｃｙｔｅ,ａｃｔｉｎｇｍａｉｎｌｙｏｎｔｈｅｅｒｙｔｈｒ...