牵引辊法兰螺栓的受力分析

针对螺检失效的现象，从受力分析角度出发，提出了其失效的原因：(1)当工作载荷加大或装配预应力超过螺栓的强度极限时，螺栓发生失效，表现为螺栓断裂；(2)当装配预应力裕量太小时，而螺栓经常过载工作，导致接触面松动，同样会导致螺栓或接触面磨损，在此基础上得出结论，主要国产设备的螺栓设计强度是足够的，且还有一定潜力可挖，而螺栓失效的原因是使用不当。     

毛细管电泳高频电导检测克林霉素的含量

建立了毛细管电泳高频电导法测定克林霉素含量的方法.考察了各种实验条件对分离和检测的影响.以2.4 mmol/L 甘氨酸 0.80mmol/L柠檬酸 4.0 mmol/L H3BO3(pH=6.5)为电泳介质,分离电压20.0 kV.在优化条件下,克林霉素的峰形良好,出峰时间快,线性范围为1.500～120.0μg/mL,检出限为0.5μg/mL.回收率达93.6%～98.9%.     

动态绘制任意阶Bezier曲线的算法及其实现方法

介绍了如何利用VC 编程技术在图形系统中动态绘制任意阶Bezier工程曲线方法，并且使绘制的曲线具有捕捉、修改、动态增加型值点等功能。利用同样的方法，可以实现B样条、三次参数等其它工程曲线的绘制，从而扩大了Bezier等曲线的工程应用。     

放线菌生物活性物质的高通量筛选

 放线菌是产生生物活性物质最多的一类微生物.最近3年,我室从云南省采集土样,分离到3000多株放线菌、真菌,选择其中2600株,进行发酵,制备成提取物,利用自建的抗氧化、抑制乙酰胆碱酶、抑制一氧化氮合成酶、AGE等模型和高通量筛选系统进行了筛选,筛选到一些值得进一步研究的菌株.对高通量筛选的有关问题及初步筛选结果进行了讨论.     

浮选药剂对浸矿细菌活性的影响

研究了丁基醚醇、乙基黄药和丁胺黑药3种浮选药剂对浸矿细菌活性的影响;进行了脱药和不脱药的铁闪锌矿精矿细菌浸出对比试验.研究结果表明:添加4×10-4 mol/L的丁基醚醇、乙基黄药、丁胺黑药,氧化34 h后,使9 K液体培养基中的Fe2 质量浓度由4.03 g/L分别增加至4.64 g/L, 4.77 g/L和5.91 g/L;浸出35 d后,精矿中锌的浸出率分别为92%和61%,这进一步验证了浮选药剂(丁基醚醇、乙基黄药)对浸矿细菌活性的影响.     

高压静电场处理油菜种子的品质影响及模型探讨

研究了高压静电场处理种子在大田生长条件下的长期效应 .结果表明 ,较低电压的处理可提高硫甙含量显著降低含油量 ,而较高电压的处理可降低硫甙含量 ,极显著降低芥酸含量 .采用平面类脂双层模型分析外加高压静电场对植物细胞跨膜电位的影响 ,并探讨其微观机理 ,一定程度上可以解释相关的实验结果     

Relationship between the exposure dose of high intensity focused ultrasound and the heated necrosis element

Heated necrosis element of tissues is the basis for treating tumor by high intensity focused ultrasound (HIFU), so study on the relationship between the HIFU exposure dose and the heated necrosis element of tissues is of great significance for both HIFU clinical applications and basic research. Using Pennes and Rayleigh formulae the relationship between the exposure dose of an annular focused transducer and the heated necrosis element (I.e. Biological focused region) in a bovine liver in vitro at a depth of 2 cm is simulated in an exposure dose range with radiation sound intensity of 7000～25400 W/cm2 and exposure time of 0～20 s. The theoretical results appear to be in quite good agreement with the experimental ones. It is shown that on the basis of existing theories the heated necrosis element produced by HIFU exposure can be predicted. The deviation of the theory from the experiments under higher exposure dose has also been discussed.     

Difference schemes on non-uniform mesh and their application

High order accurate schemes are needed to simulate the multi-scale complex flow fields to get fine structures in simulation of the complex flows with large gradient of fluid parameters near the wall, and schemes on non-uniform mesh are desirable for many CFD (computational fluid dynamics) workers. The construction methods of difference approximations and several difference approximations on non-uniform mesh are presented. The accuracy of the methods and the influence of stretch ratio of the neighbor mesh increment on accuracy are discussed. Some comments on these methods are given, and comparison of the accuracy of the results obtained by schemes based on both non-uniform mesh and coordinate transformation is made, and some numerical examples with non-uniform mesh are presented.     

高科技企业的价值链管理

分析了波特基本价值链在应用上的局限性 ,结合高科技企业的特点对波特价值链的构成要素和要素排列方式进行改进 ,构造了高科技企业的价值链模型 ,并从三个方面阐述了高科技企业价值链管理区别于传统企业的主要特征