High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

Fabrication and Application of High Quality Diamond-coated Tools

Diamond-coated tools were fabricated using Co-cemented carbide inserts as substrates by the electronically aided hot filament chemical vapor deposition (EACVD). An amount of additive in an acid solution was used to promote the Co etching of the substrate surface. The surface of the WC-Co substrate was decarburized by microwave plasma with Ar-H 2 gas. Effect of the new substrate pretreatment on the adhesion of diamond films was investigated. A boron-doped solution was brushed on the tool surface to diffuse ...     

Simulation and Experimental Analysis of Super High-Speed Grinding of Ductile Material

This study aims to reduce the work-affected layer of the machined surface by carrying out the grinding at the speed over static pr o pagation speed of plastic wave of ductile materials and also aims to clarify suc h super high-speed machining mechanism.This paper reports on the result obtain ed through the molecular dynamics simulations and experiments on the super-spee d grinding below and beyond static propagation speed of aluminum.From the simul ation results,it is verified that the plastic deformation ...     

被动雷达导引头多脉冲辐射源的角度分辨与跟踪

讨论了被动雷达导引头主波束内存在多脉冲辐射源时对多辐射源进行角度分辨并跟踪某一辐射源的方法。首先利用聚类分析法实现多辐射源角度分辨 ,然后利用主波束角度压缩方法实现单一辐射源跟踪。计算机仿真结果表明 :在中等密度脉冲辐射源环境下 ,采用聚类分析和主波束角度压缩相结合的方法可较好地实现导引头主波束内多脉冲辐射源的角度分辨与单一辐射源跟踪     

一种新型的数字编码轨道电路

基于现有UM71无绝缘轨道电路的传输通道,讨论了各种传输方案,提出了一种采用模拟调频方式的32位数字编码轨道电路,选用TMS320C32作为CPU,设计了发送和接收子系统,最后给出了室内仿真试验及其结果.     

区分全同粒子的力学量

给出可以区分两个(或两个以上)全同粒子的情况和区分方法,从而给出更具有操作性的全同性原理     

流线型挤出模曲面构造

根据塑料挤出的特点，在编程实现对型材截面轮廓凸凹性自动判断的基础上，采用射线法与比例间隔法相结合的方法，确定流道入口圆周上型值点的位置．以三次多项式作为流道模腔型曲线的数学模型，依据流线型要求给出的初始、边界条件，得出型曲线的数学方程．构建了挤出模流道的三维参数化曲面模型．有限元分析结果显示，该方法创建的流线型流道模型，其流动稳定性和平顺性都优于直线型流道．     

网络环境下高校图书馆管理模式的新趋势

论述网络环境下高校图书馆管理的主要模式:以读者用户为中心的管理模式、一切从方便读者出发的服务模式、以人为本的管理模式,塑造人本取向、主动参与的行为和塑造为教学科研服务的全校信息中心和学术机构的形象,以适应网络环境和我国市场经济的变化。     

二阶系统性能参数的研究

系统地总结了二阶系统动力学方程、传递函数、状态方程、时间响应及各种性能指标，并对其进行了详细的讨论，同时揭示了各种方法之间的内在联系及应用中注意的问题。     

甲状腺肿块的高频彩色多普勒超声诊断

目的 :探讨高频彩色多普勒超声检查对甲状腺肿块的诊断价值。方法 :对 48例甲状腺包块患者进行二维及彩色多普勒血流显像超声检查。结果 :48例甲状腺包块患者共检出肿块 67个 ,超声检查与病理对照除 3例误诊外 ,其余 45例与病理结果包括肿块部位、数目均符合 ,符合率 90 % ( 42 / 45 )。结论 :高频彩色多普勒超声检查对甲状腺肿块具有较高的诊断价值 ,可为临床提供有价值的诊断依据