超高压高CO2气藏偏差系数图版扩展与应用

Standing-Katz图版法确定天然气偏差系数是目前最常用、最基础的方法之一,但存在人工读值误差大、在超高压（拟对比压力大于15）和高CO₂含量天然气使用受限等问题。设计单组分偏差系数测定实验,结合Standing-Katz图版曲线变化规律,将图版拟对比压力扩展到30,拟对比温度扩展到3.6,并将图版数字化;基于不同CO₂含量偏差系数测定实验结果,推导了考虑不同CO₂含量的天然气拟临界压力、拟临界温度计算新模型,与常规非烃校正模型相比,新模型计算精度更高,适用范围更广。进一步将新临界参数校正模型嵌入到偏差系数扩展图版中,得到不同CO₂含量的偏差系数扩展图版,该图版在南海西部超高温高压、高CO₂含量天然气偏差系数计算中误差较小（不超过3%）,应用效果良好。     

含铝高速钢中奥氏体非均匀长大的机制

M2AI和M2高速钢经一次和二次淬火后,奥氏体晶粒和未溶碳化物的定量研究表明,在高温r/f比值相同的条件下,由于淬火前原始组织的差别,可发生正常(均匀)和异常(非均匀)两类长大。根据异常粗晶形成初期的组织观察,提出了“连续-非连续”再结晶模式和“合并—推移”式的生长机制。提出了减轻或消除M2AI钢混晶的工艺原则。     

砂土中螺旋桩在斜拉荷载作用下的承载性能

为研究斜拉荷载倾斜角度和叶片埋深对螺旋桩极限承载力的影响,基于ABAQUS软件构建了砂土中螺旋桩的有限元模型,通过螺旋桩水平承载机理砂箱试验与竖向拉拔试验数据,对模型的准确性和可行性进行验证。设置4组不同叶片埋深的螺旋桩模型,分别施加不同角度的斜拉荷载,探讨了砂土地基中螺旋桩的承载性能与斜拉角度、叶片埋深的相关性。结果表明:砂土中螺旋桩的极限承载力随着斜拉角度的增大不断减小;当斜拉角度小于30°时,螺旋桩极限承载力与斜拉角度的关系曲线近似呈线性;螺旋桩极限承载力存在一个临界埋深比,当埋深比大于等于4时,承载力不随埋深比的增大而变化。推导了深埋状态下螺旋桩受斜拉荷载作用的极限承载力公式,经验证该公式能较好反映螺旋桩极限承载力随斜拉角度增大而逐渐下降的规律。     

基于水光电力系统时序生产模拟模型的水光优化配比研究

基于考虑系统负荷、新能源发电出力等时序变化特性的时序生产模拟法,建立了水光电力系统时序生产模拟模型;从系统结构性、经济性、灵活性与可靠性方面综合确定最佳水光容量配比,并通过金沙江上游川藏段水光系统验证了模型的合理性。金沙江上游川藏段光伏电站与水电站出力具有较好的年内、日内互补特性;对于2030年水平年,考虑枯期水电留存,913.6万kW水电配套400万kW光伏的方案综合性能更优,其新增非水可再生电量约60亿kW·h。     

常压射流等离子体处理PET膜诱导自由基研究

为了考察常压射流等离子体(APPJ)处理对PET膜表面诱导自由基及其引发接枝共聚反应的效能,采用电子自旋共振技术(ESR)对APPJ处理前后PET膜表面生成的自由基及其衰变行为进行测试分析,并与接枝率测试结果进行对比。结果表明:纯He气体的APPJ处理更易引发PET膜表面生成自由基,处理时间越长,膜表面自由基浓度越高,自由基产物的稳定性受存储条件影响显著,自由基浓度越高的样品对应的接枝率也越高。     

泥沙输移对长江中游水位抬升的影响

通过对长江干流宜昌至汉口河段及与洞庭湖区泥沙输移变化的综合分析,得到了三口分流分沙逐年减少是造成洞庭湖区淤积速率减小和螺山至汉口河段淤积速率增大的主要原因,也是造成长江干流监利至螺山河段水位逐年抬升、洞庭湖区的洪水调节能力大幅度下降的主要原因等结论．按照因势利导的治理原则,荆江及洞庭湖的近期治理策略应是淤积围垸减少河道淤积、疏浚河道、加固干堤．     

2,3-二羟基哌嗪与几种氨基化合物的缩合反应研究

由乙二胺与乙二醛的缩合物２,３－二羟基哌嗪,分别与甲酰胺、脲和乙二胺反应,制得２,４,７,９,１１,１４－六氮杂三环［８,４,０,０３,８］十四烷六盐酸盐四水合物（１）,２,５,７,９－四氮杂双环［４,３,０］壬－８－酮二盐酸盐－水合物（２）和２,５,７,１０－四氮杂双环［４,４,０］癸烷（３）。化合物１为未见文献报道的新化合物。化合物２的合成工艺条件优化后,反应得率与文献［１］相比有一定提高。化合物３的合成,由于将反应分为低温和高温两个缩合阶段,使反应得率提高到７７．５％。     

Leakage of mantle helium from the Liaodong Peninsula, China

The isotopic cumpositions of helium have been investigated in hot spring gases sampled from the Liaodong Peninsula. China. The³He/⁴He ratios range from 0.14 Ra (0.14 times the atmospheric³He/⁴He ratio of 1.40 × 10^-6 to 0.72 Ra.³He/⁴He versus⁴He/²⁰Ne ratios and He contents suggest that a small amount of mantle-derived helium reaches the earth’s surface. Helium iwtope ratios of the hot spring gases show a distribution pattern similar to the regional heat flow values, indicating that the positive thermal anomaly occurring in the rtrea is closely associated with the presence of mantle-derived helium. The observations described above provide some significant evidence that the molten magma originating from partial melting of the upper mantle may have intruded into the continental crust along the activity fault. The coupling of the presence of mantle He and heat flow anomalies to seismic activity in studied region seem to imply that there is an internal relationship between mantle degassing and seismic activity.     

Cloning, construction of prokaryotic expression vector and expression ofEscherichia coli cytosine deaminase gene

Cytosine deaminase gene ofEscherichia coli strain H-30 was cloned, and its initiation codon of ‘GTG’ was mutated to ‘ATG’ by PCR. Prokaryotic recombinant expression vector pBV220-CD was constructed. Clone with high enzyme activity were selected by detecting their specific activity of cytosine deaminase. 5-FC(5-FC, 5-fluorocytosine) could induce the lethal toxicity to cells containing active CD gene. DNA sequence analysis indicated that there were 16 altered bases and 5 of them resulted in the alteration of amino acids in predicted peptide by comparing DNA sequence of the clone H-30-CD-11 with high enzyme activity with CD gene reported in Gene Bank.     

Diamond synthesis from a system of chromium-carbide and Ni70Mn25Co5 alloy

In order to ascertain the mechanism of interaction between carbide and metallic catalyst and formation of diamond under high pressure and high temperature, and find a new method to synthesize diamond with special properties, it is necessary to investigate the reaction behavior of different carbides and metallic solvent_catalysts under high pressure and high temperature. A system of Cr-3C-2 powder and Ni 70Mn 25Co 5 alloy in weight ratio of 1∶6 was treated under 6 0 GPa and 1 500℃ for 20, 30 or 60 min respectively. X_ray diffraction of the samples indicated the Cr 3C 2 decomposed partially after high pressure and temperature treatment, and Cr 7C 3, Cr and diamond formed respectively. There was not any trace of graphite in the samples. The result suggested that the separated carbon atoms could form diamond directly without conversion process of graphite into diamond. The observation of SEI, WDX and EDX also showed that diamond crystals were synthesized in the system, which have perfect surfaces and shapes, with the average grain size of about 40 μm. The properties of the crystals are being investigated.