钼对低合金钢硝酸盐体系应力腐蚀的影响

以高风温热风炉用钢的沿晶应力腐蚀开裂问题为背景,研究了Ｍｏ对低合金钢在硝酸盐溶液中的应力腐蚀行为。结果表明,低合金钢中加入合金元素将使钢中贝氏体和／或珠光体含量增大,从而提高了材料的稳定性和抗ＳＣＣ耐蚀性。提出了低合金钢／硝酸盐溶液体系的“温度－钼含量－ＳＣＣ图”。     

K 16Mn连铸坯热装炉轧制对轧材组织性能影舷

采用高温固溶加热法,在φ300轧机上模拟现场连铸坯热装炉轧制工艺,分别考察了K16Mn钢不同热装温度和开轧温度对轧材组织性能的影响.结果表明,热装轧制和常规冷装轧制屈服、抗拉强度相当,热装轧制成品塑性、韧性均较好.热装轧制工艺对K16Mn钢组织的影响,随着热装温度的提高,轧前奥氏体晶粒变得粗大,并且轧后组织混晶程度提高.这可通过提高开轧温度,首道次采用大压下量促使铸坯发生完全再结晶来消除.从而细化晶粒.改善成品组织性能.     

泥沙输移对长江中游水位抬升的影响

通过对长江干流宜昌至汉口河段及与洞庭湖区泥沙输移变化的综合分析,得到了三口分流分沙逐年减少是造成洞庭湖区淤积速率减小和螺山至汉口河段淤积速率增大的主要原因,也是造成长江干流监利至螺山河段水位逐年抬升、洞庭湖区的洪水调节能力大幅度下降的主要原因等结论．按照因势利导的治理原则,荆江及洞庭湖的近期治理策略应是淤积围垸减少河道淤积、疏浚河道、加固干堤．     

2,3-二羟基哌嗪与几种氨基化合物的缩合反应研究

由乙二胺与乙二醛的缩合物２,３－二羟基哌嗪,分别与甲酰胺、脲和乙二胺反应,制得２,４,７,９,１１,１４－六氮杂三环［８,４,０,０３,８］十四烷六盐酸盐四水合物（１）,２,５,７,９－四氮杂双环［４,３,０］壬－８－酮二盐酸盐－水合物（２）和２,５,７,１０－四氮杂双环［４,４,０］癸烷（３）。化合物１为未见文献报道的新化合物。化合物２的合成工艺条件优化后,反应得率与文献［１］相比有一定提高。化合物３的合成,由于将反应分为低温和高温两个缩合阶段,使反应得率提高到７７．５％。     

新型钢管砼框架节点试验研究及其应用

给出了钢管混凝土框架节点的试验结果,并采用有限元法对新型节点模式进行了应力场分析。介绍了该新型节点的设计方案及在实际工程中的应用。     

LF-CD-CC过程中钢液温度控制模型

在分析ＬＦ－ＶＤ－ＣＣ过程各阶段热平衡状况的基础上,开发了ＬＦ－ＶＤ－ＣＣ过程中钢液温度控制模型。用该模型模拟计算了ＬＦ－ＶＤ－ＣＣ过程的温度变化。结果表明,该模型对预报过程钢水温度,计算的命中率较高,可用于工业生产．     

Cloning, construction of prokaryotic expression vector and expression ofEscherichia coli cytosine deaminase gene

Cytosine deaminase gene ofEscherichia coli strain H-30 was cloned, and its initiation codon of ‘GTG’ was mutated to ‘ATG’ by PCR. Prokaryotic recombinant expression vector pBV220-CD was constructed. Clone with high enzyme activity were selected by detecting their specific activity of cytosine deaminase. 5-FC(5-FC, 5-fluorocytosine) could induce the lethal toxicity to cells containing active CD gene. DNA sequence analysis indicated that there were 16 altered bases and 5 of them resulted in the alteration of amino acids in predicted peptide by comparing DNA sequence of the clone H-30-CD-11 with high enzyme activity with CD gene reported in Gene Bank.     

Diamond synthesis from a system of chromium-carbide and Ni70Mn25Co5 alloy

In order to ascertain the mechanism of interaction between carbide and metallic catalyst and formation of diamond under high pressure and high temperature, and find a new method to synthesize diamond with special properties, it is necessary to investigate the reaction behavior of different carbides and metallic solvent_catalysts under high pressure and high temperature. A system of Cr-3C-2 powder and Ni 70Mn 25Co 5 alloy in weight ratio of 1∶6 was treated under 6 0 GPa and 1 500℃ for 20, 30 or 60 min respectively. X_ray diffraction of the samples indicated the Cr 3C 2 decomposed partially after high pressure and temperature treatment, and Cr 7C 3, Cr and diamond formed respectively. There was not any trace of graphite in the samples. The result suggested that the separated carbon atoms could form diamond directly without conversion process of graphite into diamond. The observation of SEI, WDX and EDX also showed that diamond crystals were synthesized in the system, which have perfect surfaces and shapes, with the average grain size of about 40 μm. The properties of the crystals are being investigated.     

火力发电厂汽机房屋盖结构选型分析

本文对汽机房屋盖结构的两种受力体系进行了技术经济比较,阐述了空间网架在我国的应用情况,介绍了平板型网架应用在火力发电厂汽机房屋盖中的可行性及经济性。根据工业厂房建筑中的传力路线,分析了用于汽机房屋盖结构的平板型网架考虑吊车水平刹车力作用时的内力分布特点及其应用,提出了汽机房屋盖结构使用平板型网架的观点     

不锈钢堆焊试件熔合区充氢前后的断裂韧性研究

研究了氢对不锈钢堆焊层熔合区的断裂韧性的影响作用。发现不锈钢堆焊层熔合区的断裂韧性随着充氢时间的增加而下降,结果表明,氢是引起加氢反应器不锈钢堆焊层剥离的主要因素。