用焓法有限元解相变问题的离散化方法

为了消除应用焓法进行含有相变的有限元传热计算结果呈台阶形的现象,本文作者提出“焓计算单元”和“固相分数”的概念,并将几种一维有限元实施方案的计算结果与精确解对比,说明采用所提出的概念,可以使有限元计算得出更为合理的结果。     

凹坑板式空气预热器的传热特性及多目标优化

以全焊接型凹坑板式空气预热器为对象,基于最优设计试验方案,运用Workbench Fluent软件数值模拟凹坑板片特征结构参数对传热流阻性能的影响。基于参数敏感度分析,得到单因素作用下对传热流阻性能的影响程度为凹坑的纵向间距>长轴>横向间距>深度。基于响应曲面法分析,得到多因素协同作用时,凹坑之间的结构参数横纵距对性能影响比凹坑自身的结构参数深径比大。基于遗传算法以摩擦因子f最小、努塞尔数Nu与综合换热因子J_F最大为优化目标,得到给定范围内的3组较优结构组合。     

不同热管工质对热管冷却反应堆堆芯物理参数的影响与分析

热管冷却反应堆采用非能动传热技术,热响应速度快,可避免堆芯单点失效,具有功率密度大、寿命长、环境适应性强、工作性能稳定等特点,是目前空间核反应堆研究的热点。本文基于清华大学开发的反应堆蒙特卡洛中子输运程序RMC (Reactor Monte Carlo code),以美国爱荷华国家实验室(Idaho National Laboratory, INL)设计的热管冷却反应堆INL Design A为研究对象,选取3种热管工质开展热管冷却反应堆堆芯物理计算。计算结果表明：锂热管工质不仅拥有很好的热物性参数,并且使用锂热管工质的热管冷却反应堆缓发中子有效份额最大、中子能谱较硬、燃耗反应性损失最小、增殖性能最佳,有利于热管冷却反应堆堆芯小型化与长寿命。因此,推荐锂为热管冷却反应堆的热管工质。     

扩展裂纹缺陷评定方法的优化研究

裂纹扩展的缺陷评定方法,越益受到了人们的重视,美国ＥＰＲＩ提出的“裂纹 推力图”方法,虽然准确合理,但方法偏于繁复,尚难于向工程界推广。清华大学力学 研究所曾先后提出几种评定方法,以期使评定过程得以简化。在此基础上,文章提出 “相容应力增量”法作为优化方法,它将使全部评定过程大为简化,从而为扩展裂纹的 缺陷评定方法向工程界推广创造便利条件。     

专业“温度”与专业过热现象试析

本从数学角度探讨了专业“温度”及专业过热现象,并建立了一个防止专业过热的人才培养模型。     

换热器试验台用制冷剂循环供应系统的研究

介绍了换热器试验台用制冷剂循环供应系统的研究背景,工作过程和技术特点．它攻克了普通制冷压缩机用于有高技术要求的综合性能试验台所无法解决的难题,为空调器用换热器综合性能试验台的研制,奠定了基础．     

冷热兼供热泵空调器的性能模拟与分析

针对冷热兼供热泵空调器的特点,建立了冷热兼供热泵空调器稳态运行的数学模型,对该系统进行了较全面的模拟分析,并将模拟结果和实验数据进行了比较,两者吻合良好．同时应用该软件对不同设备参数和不同工况下性能进行分析,得到若干有用的结果．     

Explicit analytical solutions of non-Fourier heat conduction equation for IC chip

Four basic explicit analytical solutions of non-Fourier heat conduction equation simulating IC chip thermal condition are derived. Some other analytical series solutions can also be derived with the above-mentioned basic solutions. Analytical solution has its own irreplaceable important meaning in theory. In addition, as the standard solution to check the accuracy, convergence and effectiveness of various numerical computational methods and their differencing schemes, grid generation ways and so on, the analytical solution is very useful also for the newly rapidly developing computational heat transfer.     

Leakage of mantle helium from the Liaodong Peninsula, China

The isotopic cumpositions of helium have been investigated in hot spring gases sampled from the Liaodong Peninsula. China. The³He/⁴He ratios range from 0.14 Ra (0.14 times the atmospheric³He/⁴He ratio of 1.40 × 10^-6 to 0.72 Ra.³He/⁴He versus⁴He/²⁰Ne ratios and He contents suggest that a small amount of mantle-derived helium reaches the earth’s surface. Helium iwtope ratios of the hot spring gases show a distribution pattern similar to the regional heat flow values, indicating that the positive thermal anomaly occurring in the rtrea is closely associated with the presence of mantle-derived helium. The observations described above provide some significant evidence that the molten magma originating from partial melting of the upper mantle may have intruded into the continental crust along the activity fault. The coupling of the presence of mantle He and heat flow anomalies to seismic activity in studied region seem to imply that there is an internal relationship between mantle degassing and seismic activity.     

Shear-wave splitting and anisotropy in crust of Dabieshan orogenic belt

The shear-wave splitting was analyzed on the deep seismic sounding profile crossing the Dabieshan area. The direction difference between Sg and SmS fast wave polarization indicates that the modem regional tectonic stress field in the Dabieshan area exists only in uppcr crust, while the crack alignment caused by the Triassic collision between the North China and the Yangtze blocks had been preserved in mid-lower curst.