金属表面涂装类项目的环境影响评价

介绍了涂装类建设项目环境影响评价的重点,分析了产污环节和筛选评价因子,评价了污染防治措施的可行性,指出应着重注意含重金属原料的使用、涂料的性质种类和喷漆室等效排气筒的计算等问题.     

新型防腐喷涂系统优化设计

防腐喷涂系统的设计主要用于石油管道焊缝处理机器人中，对喷涂系统整体结构进行了设计，找到了系统要实现设计目的所需要解决的关键问题，从而通过建立数学模型来对系统的结构进行优化。为降低压力损失进行优化，采用Solidworks／Flow Simulation对气缸内部通道进行流体分析。     

晶粒尺寸和热处理对Sm2Fe17N3/Fe3N/BN软磁/硬磁复合材料的合成及磁性能影响

采用高能球磨和真空热处理方法制备Sm2Fe17N3/Fe3N/BN复合材料, 并研究球磨过程中晶粒尺寸变化对固态相变和磁性能的影响.  结果表明: Sm2Fe17N3和Fe3N相产生的条件是Fe的晶粒尺寸达到纳米量级（D＜80 nm）并形成Fe(Sm)固溶体; 随着退火时间的增加, 300 ℃真空退火的球磨样品中Sm2Fe17N3的结晶物增多, 矫顽力提高, 表明样品的磁性能与Sm2Fe17N3的结晶程度有关.     

弘扬延安精神,加强和改进党的作风建设

延安精神是我们党的传家宝,是中华民族宝贵的精神财富;延安精神对加强和改进党的作风建设有极其重要的意义;新形势下弘扬延安精神,加强和改进党的作风建设,一是认真贯彻党的全心全意为人民服务的根本宗旨;二是大力发扬艰苦奋斗的作风。     

Design of radiation hard phase-locked loop at 2.5 GHz using SOS-CMOS

Abstract: A radiation hard phase-locked loop (PLL) is designed at 2.5 GHz using silicon on sapphire complementary metal-oxide-semiconductor process. Radiation hardness is achieved through improving circuit design without sacrificing real estate. Stability is guaranteed by a fully self-bias architecture. The lock time of PLL is minimized by maximizing the loop bandwidth. Frequency tuning range of voltage controlled oscillator is significantly enhanced by a novel load configuration. In addition, multiple bias stages, asynchronous frequency divider, and silicon on sapphire process jointly make the proposed PLL more radiation hard. Layout of this PLL is simulated by Cadence Spectre RF under both single event effect and total induced dose effect. Simulation results demonstrate excellent stability, lock time < 600 ns, frequency tuning range [1.57 GHz, 3.46 GHz], and jitter < 12 ps. Through comparison with PLLs in literatures, the PLL is especially superior in terms of lock time and frequency tuning range performances.     

The Conflict Between the Traditional Value and Reality In Sister Carrie

Theodore Dreiser relates a story of Carrie 's rise from a poor country girl to a Broadway star in Sister Carrie.An attempt is made in this paper to analyze the cold society.By way of analyzing this unequal and cruel reality to prove:in the world only the fittest can survive,the standards and requirements of morality are challenged and the traditional value is suspected.In the cold reality,any way that can protect oneself or survive in the world is sensible,morality and traditional value are weak and meaning...     

聚四氟乙烯材料油漆涂覆工艺的改进

聚四氟乙烯材料表面活化能很低,漆膜在该材料上的附着力很差,不能满足产品的漆膜附着力要求,本文经过工艺改进,采用钠-萘表面处理剂对底材进行活化处理,使得漆膜的附着力明显增强,满足了某型产品的环境使用要求。     

Fe—Cr—Ni三元合金电镀初探

本文研究在氯化物电解液中制备类似18-8不锈钢成份的 Fe Cr-Ni 三元合金镀层。采用这种工艺规范所得到的铁铬镍三元合金外观呈银白色,镀层铁铬镍含量分别是:58.0%～66.4%,19.5%～22.5%,14.4%～19.2%,还含有少量 Ti 等微量元素.镀层结合力良好,耐腐蚀符合不锈钢要求。     

光弹贴片法对复合材料混合型应力强度因子的测定

本文介绍用光弹性贴片法测试正交各向异性单向板混合型应力强度因子K_Ⅰ、K_Ⅱ值.光弹薄片可直接粘贴于工程构件,试验表明:此法可作为对复合材料进行光弹性断裂分析的工程应用近似方法.     

电沉积Ni-P非晶合金的研究

研究了以NaH_2PO_2为磷的供给剂的Watts电解溶液在电沉积Ni-P合金时,温度和NaH_2PO_2含量对镀层含磷量和沉积速度的影响;非晶镀层在热处理时结构的变化和硬度变化受热处理温度的影响;以及镀层结合力和针孔度随膜厚的变化,Ni-P非晶合金的良好耐蚀性能。