GH3535/316H爆炸复合板的界面精细结构表征

An explosion-welded technology was induced to manufacture the GH3535/316H bimetallic plates to provide a more cost-effective structural material for ultrahigh temperature, molten salt thermal storage systems. The microstructure of the bonding interfaces were extensively investigated by scanning electron microscopy, energy dispersive spectrometry, and an electron probe microanalyzer. The bonding interface possessed a periodic, wavy morphology and was adorned by peninsula- or island-like transition zones. At higher magnification, a matrix recrystallization region, fine grain region, columnar grain region, equiaxed grain region, and shrinkage porosity were observed in the transition zones and surrounding area. Electron backscattered diffraction demonstrated that the strain in the recrystallization region of the GH3535 matrix and transition zone was less than the substrate. Strain concentration occurred at the interface and the solidification defects in the transition zone. The dislocation substructure in 316H near the interface was characterized by electron channeling contrast imaging. A dislocation network was formed in the grains of 316H. The microhardness decreased as the distance from the welding interface increased and the lowest hardness was inside the transition zone.     

Influence of modulation period for β-Cu2+xSe/SiC nano-multilayer films on their thermoelectric properties

In this study, β-Cu_2+xSe/SiC nano-multilayer films with different modulation period were successfully deposited on SiO₂/Si substrates by sputtering alternately using Cu–Se and SiC targets. The deposited films were observed on both surface and cross-section, and the thermoelectric properties were studied. The results show that both carrier concentration and mobility at room temperature decreased with the reducing modulation period for the nano-multilayer films. The conductivity slightly decreased and Seebeck coefficient greatly increased with the reducing modulation period. As a result of competition, the power factor of the nano multilayer films increased with the reducing modulation period because the positive effect of the Seebeck coefficient exceeded the negative effect of the conductivity. In the case of β-Cu_2+xSe/SiC nano multilayer film with the smallest modulation periods (210 ?nm), the power factor reached 0.39 ?mWm^?1K^?2 and 0.59 ?mWm^?1K^?2 at room temperature and 325 ?°C, respectively. The enhanced power factor for nano multilayer films is attributed to the scattering process at the β-Cu_2+xSe/SiC layer interface, which reduces the carrier concentration and the mobility. It is concluded that the thermoelectric properties of β-Cu_2+xSe films can be effectively improved by designing nano multilayer structure.     

默声音符编码文本输入方法

人们希望语音输入能够取代键盘, 成为计算机文本输入的最主要方式. 但语音输入在噪声环境中准确率低, 且会泄露输入信息, 也会影响他人. 本文提出默声音符编码文本输入方法, 该方法选择默声音中容易发声、容易精准识别且彼此间容易区分的少数几个音素作为默声音符(silent voice symbol), 对各种字符进行编码. 类似摩尔斯电码, 用户只需要记住编码方式, 就可以通过读默声音符准确地实现文本输入. 实验证明提出的方法有潜力替代键盘在各种环境下完成文本输入任务.     

两级泵站数据接口方案研究

通过对深圳市北线引水工程上埔泵站与粤港供水上埔泵站两个系统数据对接方案的研究,提供一种简单、安全的两级泵站数据无缝接口方案,提升自动化信息化水平。     

飞行/推进综合系统分散控制设计与仿真研究

对飞行/推进综合系统分散控制如何保持集中式控制性能的问题,研究了一种分散控制系统设计方法.首先设计集中式控制器使系统达到最优性能,以此作为性能参考,然后引入分散控制结构处理飞机与发动机之间的耦合作用,对其中的接口变量选取问题进行了分析,给出了分散控制系统的设计步骤,最后通过仿真验证了这种设计方法可以使分散控制具有与集中式控制相同的指令跟踪和解耦性能.     

THE TRANSFER OF ALKALINE EARTH-METAL ION AT W／NB INTERFACE FACILITATED BY JOSAMYCIN

This paper describes the investigation of the transfer behaviour of the alkaline earth-metal cations across the water/nitrobenzene interface facilitated by josamycin in the nitrobenzene phase using semi-differential cyclic voltammetry. The peak height is directly proportional to the concentration of josamycin (nb) and to the potential scan rate. The complexes formed from alkaline earth-metal ions and josamycin at the w/nb interface are ML_2~(2+) ion.     

基于扩展有限状态机和断言的总线接口协议测试平台

在SoC设计流程中，传统的仿真验证方法存在可观察及可控制性较差、自动化水平低等缺陷．为此，提出了一种基于扩展有限状态机（EFSM）和断言的SoC接口协议测试平台，该平台是一种自反馈测试平台，它不仅可以自动产生大量符合协议规范的测试激励矢量，而且可以通过对断言统计信息的反馈提供多种偏置选择，从而进一步提高验证的自动化水平．将该平台用于对视频后处理芯片中Wishbone总线接口协议的功能验证当中，验证结果表明，该平台可以缩短仿真验证时间大约55％～65％左右，有效地提高了验证的效率和质量．     

MPI并行编程环境及程序设计

通过对MPI原理和特点的研究,给出了并行MPI程序的基本设计思路和执行过程,并实现了向量相加的并行计算.     

卫星半物理仿真系统实时接口研究与实现

本文介绍了卫星半物理仿真系统的组成及实时接口方案设计，给出了其硬件设计技术及软件设计技术，提出了采用以太网将各种数据采集计算机及数据处理计算机联在一起的设计方案，并进行了可靠性分析。     

高分子CROUTING树脂高压注浆堵漏技术

针对某一高层建筑地下室渗漏现象，采用高分子树脂高压注浆治理方案处理．堵漏效果良好，对各类工程的渗漏具有推广应用价值。详细论述了高分子CROUTING树脂高压注浆堵漏的施工工艺，以及该树脂的特性及技术指标和应用范围等。