电信空调冷却塔供冷系统节能应用

根据电信机楼的空调负荷特点,在冬季和部分过渡季节,选择使用冷却塔加板式换热器的间接式免费供冷空调系统为电信机楼提供冷量。介绍了冬季机房空调送风温度和冷却塔供冷温度的确定,分析了冷却塔供冷温度对冷却塔运行消耗的影响。通过预测计算确定冷却塔免费制冷的的运行时间及节能效果。并引入了冷负荷供需指数的概念,经过现场测试计算得出江苏电信第二枢纽工程中影响该指数的三个因素,最后总结了江苏电信免费制冷技术的节能情况和应用潜力。     

湘西地区不同居群箭叶淫羊藿叶片的脂质过氧化

对湘西地区凤凰、永顺、龙山3个不同居群的箭叶淫羊藿叶片的超氧阴离子自由基（·O₂）的产生速率和丙二醛（MDA）的含量进行测定.结果表明：永顺的箭叶淫羊藿的超氧阴离子自由基的产生速率最大,为(0.059　1±0.003　3) μmol·min^-1·g^-1,而龙山的箭叶淫羊藿的超氧阴离子自由基的产生速率最小,为(0.053　0±0.000　9) μmol·min^-1·g^-1;在3个不同居群的箭叶淫羊藿叶片的MDA的含量中,永顺的箭叶淫羊藿的含量最高,为(0.014 9±0.001 4) nmol·g^-1,而龙山的箭叶淫羊藿的含量最低,为(0.007　5±0.001　4) nmol·g^-1.     

新概念无人穿梭艇静水操纵性能

引入一种具有单体半滑行穿浪船型的新概念无人艇——穿梭艇,对其优良的操纵性能进行研究和分析.根据国际海事组织船舶操纵性试验标准,搭建穿梭艇自航模系统,进行标准的自航操纵性试验,获取相关的静水操纵性数据.采用船舶操纵性理论,结合试验数据对穿梭艇的操纵性能进行研究和分析.试验和分析结果表明穿梭艇具有良好的操纵性能和灵活性、独特的操纵性特点和优势.此外,采用数值计算方法,对其独特的操纵性特点进行了理论分析.     

环柱状血管化肿瘤生长模型的自由边界问题

该文研究环柱状血管化肿瘤生长模型的自由边界问题. 假设肿瘤环绕血管外侧生长,考虑其垂直截面的生长规律.肿瘤区域的内侧边界是固定的,外侧边界是自由边界.证明了:(i)该问题存在稳态解;(ii)若血管化函数α(t)保持一致有界,则自由边界R(t)保持一致有界;(iii)若lim_t→∞α(t)=0,则自由边界将收缩至内边界,即肿瘤消失.     

Template/surfactant free and UV light irradiation assisted fabrication of Mn-Co oxides composite nanorings: Structure and synthesis mechanism

A facile, green, cost effective, and template or surfactant free strategy via a two-step route i.e. UV irradiation followed by dissolution-growth for the controlled synthesis of Mn-Co composite nanorings at room temperature was proposed. The nanorings structures and the process were systematically studied via TEM, HRTEM, EDX and XRD. Bir-MnO_2 nanosheets first formed through the direct photolysis of KMnO_4 under UV light irradiation. This was followed by a dissolution-growth process via the dissolution of Bir-MnO_2 nanosheets by the generated H~+ from the redox reaction between the added Co(NO_3)_2 and residual KMnO_4, as well as the accompanied formation of CoOOH, and Mn-Co composite nanorings. It was found that a balance between the dissolution and growth rate was needed. Suitable pH, KMnO_4 presence and the starting nanosheets like Bir-MnO_2 were the key factors for the formation of nanorings. The obtained Mn-Co nanorings/TiO_2 showed enhanced efficiency for the catalytic oxidation of HCHO. Based on the above understandings, it is believed that the developed dissolution-growth method can be adopted for the designing and preparation of other Mn-Co composite nanostructures which can be further applied for environmental pollution remediation.     

弱湍流中无线光通信系统差错性能建模与仿真

大气无线光通信（FSO）信号受大气湍流及光电转换器件影响,不确定性大。从探测接收光信号的实际过程出发,以大气信道和光电探测信道两个基本模型为基础进行理论推导,提出了弱湍流扰动下光电转换的离散计数概率和连续计数概率密度两个严格数学表达式,给出了其数值计算方法。在此基础上,推导出二进制强度调制下检测电流的概率密度计算式,建立了弱湍流无线光通信差错性能的数学计算模型,并据此对闪烁指数、背景噪声等因素影响进行仿真。结果表明,基于该模型的系统差错性能与预测分析相一致,所给模型可有效评估弱湍流条件下无线光通信系统性能。     

热敏灸对运动大鼠运动能力和心肌、骨骼肌细胞线粒体过氧化损伤的影响

目的研究热敏灸对运动大鼠运动能力和心肌、骨骼肌细胞线粒体过氧化损伤的影响。方法将40只大鼠随机分为正常对照组、单纯运动组、运动+普通悬灸组和运动+热敏灸组,采用14 d递增大强度跑台运动训练和生物化学的方法,观察热敏灸对运动大鼠运动能力和心肌、骨骼肌细胞线粒体过氧化损伤的影响。结果运动+热敏灸组大鼠疲劳相关症状显著改善,跑台力竭时间显著高于运动+普通悬灸组和单纯运动组。运动+热敏灸组大鼠心肌、骨骼肌细胞线粒体SOD酶活性高于单纯运动组、运动+普通悬灸组,心肌细胞线粒体SOD酶活性低于正常对照组,但骨骼肌细胞线粒体SOD酶活性与正常对照组比较,差异无显著性;MDA含量低于单纯运动组和运动+普通悬灸组,但高于正常对照组。结论热敏灸足三里穴具有明显的抗运动性疲劳作用,机理与热敏灸降低过度运动大鼠心肌和骨骼肌细胞线粒体过氧化损伤有关。     

求解渗流自由面的有限元混合不动点法

基于有自由面渗流分析的高斯点,建立了求解渗流问题的非光滑非线性方程组模型和求解此类问题的有限元混合不动点算法,此方法属于固定网格法,只需划分一次网格,不需要对数据做任何近似处理,完全利用程序迭代计算渗流自由面.讨论了非光滑方程组解的存在性和该不动点算法的收敛性,通过节点压强插值绘制出渗流自由面.算例结果表明,该方法简单且收敛速度快.对不动点法的收敛性分析为迭代法的收敛提供了理论依据.     

先秦文学中的水的承载意象

先秦文学中水的承载意象,带有强烈的感伤和忧郁倾向。而在道家文学中,水的承载意象却成了快乐、自由的象征,而且这种变化是随着历史的推移经历了一个演变过程。     

Superior machinability of steel enhanced with BN and MnS particles

The strategy that replacing part of MnS with BN was proposed in order to decrease the sulfur content in sulfur based free-cutting steel. The effects of BN and MnS inclusions on the microstructure and machinability of the steel were systematically investigated. The results show that most of the BN and MnS inclusions exist individually in the steel and only a small amount of them are in a composite state forming either isolated particles or clusters of particles. In the case of multi-phased steel, the theoretical calculation predicts that the volume of large BN particles should be 0.7 times of the volume of large MnS particles. The machinability of this type of BN and MnS alloy steel over a wide range of cutting speeds ranging from a low speed appropriate for drilling to a high speed appropriate for turning is confirmed as being equal to or superior to that of an MnS reference steel, even though the sulfur content in the composite steel is only half that of the MnS steel. The aptitude for cutting effect of 240 ppm nitrogen and 115 ppm boron in the composite steel is demonstrated to be equivalent or even better than 1000 ppm sulfur in MnS free-cutting steel.