板端砌体局压应力分布研究综述

对混合结构房屋中砌体局部受压的特点进行了介绍。从国外和国内对板端砌体应力分布理论研究、试验研究方面进行了论述。对研究中应进行的相关问题进行了分析。     

Pre-processing for time domain image formation in SS-BSAR system

A pre-processing procedure is designed for a space-surface bistatic synthetic aperture radar (SS-BSAR) system when a time domain image formation algorithm is employed. Three crucial technical issues relating to the procedure are fully discussed. Firstly, unlike image formation algorithms operating in the frequency domain, a time domain algorithm requires the accurate global navigation satellite system (GNSS) time and position. This paper proposes acquisition of this information using a time-and-spatial transfer with precise ephemeris and interpolation. Secondly, synchronization errors and compensation methods in SS-BSAR are analyzed. Finally, taking the non-ideal factors in the echo and the compatibility of image formation algorithms into account, a matched filter based on the minimum delay is constructed. Experimental result using real data suggest the pre-processing is functioning properly.     

A liquid helium temperature target with a 10 K vapor shield for shock compression experiment in the environment condition of 100 Pa

The shock compression experiment of liquid helium is an available way to gain properties of specimen at high temperatures and pressures.Based on Fluent,a thermal insulation analysis and design of a liquid helium temperature target in the environment condition of 100 Pa for shock compression experiment is performed.Then,a cryogenic target with a 10 K helium vapor shield and a separated vacuum interval is particularly developed.A lowest temperature of 3.63 K and a stable temperature of 3.70 K in the specimen cavity with an accuracy of 0.1 K are obtained by means of continuous flow and vacuum cooling.Both time-consuming and temperature stability are well-suited to the requirements of the shock compression experiment.The results show that the calculated and experimental data well-matched each other.The simulation method may be effective and feasible for the optimal design of the cryogenic target.     

涡旋式压缩机涡旋齿线型修正的新方法

本文分析了在切削加工过程中刀具对涡旋式压缩机渐开线型涡旋齿的干涉现象及其对排气角和压缩机容积比的影响。提出了一种对渐开线线型修正的新方法。经过修正的一对涡旋齿,排气角可达2π,实现零余隙压缩,可以较大幅度地提高压缩比和容积效率。按照这种方法,通过电子计算机求解,得到了十分精确的加工要素,并在产品试制中采用。样机试验结果表明,修正后的涡旋齿啮合情况良好。     

KNIT FABRIC SURFACE PROPERTY AND MOISTURE TRANSFER

This paper deals with the properties of the fabric such as surface compression energy, the thick,ness, surface hairness, compressional resilience and effect of these factors on the moisture transport.In the course of the present investigation, the possibility of expressing the relationship between thethickness and the pressure as a hyperbolic function is considered, and compressional resilience is al-so described by relative compression energy loss. The vapor resistance of fabric in terms of still air layer and mathematical model of vaportranspiration are elucidated and ten samples from various double knit fabrics made on the same ma-chine are tested in this study and a multivariate linear regression model is suggested. It is found thatthe thickness of fabric is the strongest factor in the mathematical model of vapor evaporation.     

超塑性拉伸与超塑性压缩的比较

通过对超塑性拉伸和压缩试验结果的比较，可看出其最佳超塑性变形温度、应变速度、流动应力和极限应变量存在着明显的差异．     

松籽特征参数及脱壳可靠性研究

本文对松籽的结构、变形特征参数进行了研究，建立了干涉模型．并在保证松仁完好率的条件下，提出了最优压缩量和松籽可脱壳性即脱壳可靠度计算方法     

一类数据的层次压缩算法及其实现

一类数据的层次压缩算法及其实现孟宪福（计算机科学与工程系）关键词：算法；数据压缩／层次压缩分类号：ＴＰ３９１进行数据压缩的主要目的有两个：一是提高数据的传输速度，也就是在数据传输之前进行压缩处理；数据传输结束后，再进行恢复和使用。这样，可以减少数据的...     

JD—5型多功能试验机的研制

ＪＤ—５型多功能试验机是集静态拉伸、压缩、弯曲试验和动态预制疲劳裂纹试验于一身的一种多功能试验机。本文论述了ＪＤ—５型多功能试验机的设计思想，该机的工作原理和特色；结合实践研究中反映的大量数据、资料论证了该机的先进性。