FC-AL远程镜像存储系统设计与实现

提出了一种经济地构建FC AL远程镜像存储网络的方案 ,论述了它的硬件体系结构和存储服务软件体系 .由于利用光纤通道仲裁环结构并结合附网存储的思想 ,该系统具有容量大 ,可扩展性强 ,传输速度快和价格低廉等基本特点     

光纤通道主机适配器QLA2200电路原理

在分析光纤通道技术优点的基础上，以QL2200为例，研究了光纤通道主机适配器的体系结构，分析其电路原理和作业流程，对光纤通道适配器进行了反向设计，所获得的结论对于光纤通道接口的设计和探讨光纤通道协议实现的机理具有普遍的意义。     

Adsorption Mechanism of Disperse Dye on Elastic Polyurethane Fibre

In this paper, the adsorption isotherms of two disperse dyes, C.I. Disperse Red 60 and C.I. Disperse orange 76, on two kinds of PU fibers at 90℃ were measured respectively. It was found that these adsorption isotherms followed a dual model, Nernst and Langmuir. Based on the parameters obtained in studying, the relationship between the chemical structure of dyes and their adsorption behaviors was arialyzed. Through the measurement of washing fastness of dyed sample with two dye concentrations, 1% （o.w. f） and 3% （o. w. f）, it was found that the pale shade dyeing possessed better wet-fastness than the dark. This phenomenon confirmed further that the disperse dyes were sorbed on the PU fiber by langmuir sorption and the partition mechanism.     

接入网中的有线电视

本文根据有线电视的传输原则，根据邮电部用户接入网中综合传输电信业务和有线电视业务的规定，向读者介绍了一种利用现已建成的光纤通信网实现ＣＡＴＶ传送的实现过程。     

Estimation of Single-fibre Tensile Properties from the Bundle Tensile Curve of Polyester Fibres

Fibre bundle tensile curves can be used to characterise fibre processing properties and end-use performance directly and to predict single-fibre properties in theory. In this paper, the tensile behaviour of polyester fibre-bundles has been analysed in characteristic values and diagramming. The characteristic distributions which include the symmetry distribution on right part, SRBS‘(e), on left part, SLBS‘(e) and the curve on base-line modification, MBS‘(e),based on the modulus distribution, BS‘(e), as well as thefrequency density function of broken fibres, B‘(e), havebeen derived from the tail of bundle tensile curves. Thetheoretical and measured results show that the mostimportant curves are MRS‘(e) and B‘(e) and can be usedto estimate the breaking-extension distribution of singlefibres. Especially for MRS‘(e), the modulus distributioncan accurately characterize single-fibre tensile propertiesand is no limitation as the calculation of B‘(e) because thebundle specific stress Y(e) of no fibre breaking at extensione should be found at first.     

液态浸渗法制备复合材料的压渗动力学特性

就液态浸渗法制备短纤维增强金属基复合材料工艺中，液态金属对纤维预制件的压力浸渗过程提出一种动力学模型．获得了挤压时间与液体温度和压力之间的关系．为短纤维／金属复合材料及生物工程材料的制备工艺提供了理论依据．     

分散镶铸高锰钢复合材料组织与性能分析

采用分散镶铸工艺在高锰钢铸件内镶铸多状弹簧钢丝骨架，浇注后得到了复合材料试棒。在实验室采用金相、硬度试验、电子探针等手段对复合材料铸态及水韧处理后的组织、性能、元素扩散等进行了分析，并进行了耐磨性试验。金相分析结果表明：分散镶铸后，６５Ｍｎ钢丝在高锰钢铸件内部产生了良好的冶金结合，水韧处理后形成了网状纤维马氏体组织，从而提高高锰钢件在低冲击磨料磨损条件下的耐磨性，电子探针分析结果显示了锰元素在复合     

室温下Grp*Al2O3_SiO2(sf)/ZL109的干滑动摩擦磨损性能

耐磨性是材料重要的机械性能之一 .文中采用国产MM_2 0 0型摩擦磨损试验机对新型Grp·Al2 O3_SiO2 (sf) /ZL10 9复合材料进行了干滑动摩擦磨损试验 ,并探讨了石墨在其中的作用 .同时采用HB_30 0 0型布氏硬度计测定了与摩擦磨损性能相关的硬度指标 .     

羊毛纤维重复扭转疲劳性能的研究

在自行设计的单纤维扭转疲劳试验仪上测试了品质支数为70的羊毛的重复扭转疲劳性能.得到了羊毛扭转疲劳至断裂的循环次数N与扭转角θ、张力p的关系,分析了纤维重复扭转性能的规律,并提出了基准测试参数.     

棉纤维遮光率的测定

讨论了棉纤维材料遮光率的指标;介绍了一种测试方法;对单根棉纤维全长范围内的遮光率进行了测试,得到了基础性的数据;并对双层纤维及外推到三层纤维的遮光率变化规律进行了测试分析,这些参数对有关仪器的设计将有指导意义.