电潜单螺杆泵油井生产系统优化设计方法

以电潜单螺杆泵油井生产系统为研究对象 ,以油井供液能力 (原油入井流动特性曲线 )、单螺杆泵的特性和整个系统的协调工作为依据 ,利用系统节点分析方法和最优化技术 ,把获得设计产量下的系统效率最高或能耗最低作为优化设计目标 ,介绍了井下电潜螺杆泵子系统基本模型的建立方法 ,并给出了有关的换算关系式、优化设计方法及步骤。利用现场优化设计实例验证了此方法的可行性 ,为油田电潜单螺杆泵油井生产的优化设计提供了理论依据。     

分解者亚系统能量流动的数学分析

依据房室模型和微分方程理论,对绿色农业生态系统中的分解者亚系统的能量流动过程进行了数学分析,建立了数学模型。稳定性分析结果表明,在绿色农业生态系统中,分解者亚系统能量流动过程中的平衡态是渐进稳定的。即该平衡态的稳定性机制为负反馈机制,该系统具有抵抗干扰和保持系统平衡态的自我调节能力,以确保能量流动的正常进行。最后,通过解微分方程,给出了该系统能量流动的数学模拟公式。     

Compact difference approximation with consistent boundary condition

For simulating multi-scale complex flow fields it should be noted that all the physical quantities we are interested in must be simulated well. With limitation of the computer resources it is preferred to use high order accurate difference schemes. Because of their high accuracy and small stencil of grid points computational fluid dynamics (CFD) workers pay more attention to compact schemes recently. For simulating the complex flow fields the treatment of boundary conditions at the far field boundary points and near far field boundary points is very important. According to authors' experience and published results some aspects of boundary condition treatment for far field boundary are presented, and the emphasis is on treatment of boundary conditions for the upwind compact schemes. The consistent treatment of boundary conditions at the near boundary points is also discussed. At the end of the paper are given some numerical examples. The computed results with presented method are satisfactory.     

旋转水射流破岩的数值模拟分析

采用非线性动力有限元和岩石动态损伤模型模拟了旋转水射流作用下岩石的损伤破坏过程 ,其中岩石损伤场的求解采用解耦的方法。同时还对旋转水射流的破岩机理进行了分析。模拟计算结果与前期的试验结果一致 ,均显示旋转射流具有较强的破岩能力 ,其原因在于旋转射流的质点具有三维速度 ,破岩时以倾斜冲击为主 ,易于在岩石表面形成拉伸和剪切破坏 ,回流的干扰较少 ;破岩过程首先是形成一环形破碎带 ,然后沿径向和轴向发展 ,所形成的破碎坑呈内凸锥状。旋转射流破岩的优势在于破碎面积大、效率高。     

滨南油田低渗欠注井酸化增注技术研究与应用

提出了一种针对滨南低渗油田欠注井酸化增注的系统实验研究方法。根据储层特征分析了注污水和重复酸化对地层的损害及对酸化液的选取原则。根据长岩心酸化流动模拟实验进行了酸化工艺参数优选及其评估分析。现场施工证明该酸化液体系适应性较好 ,工艺参数合理 ,能够较好地解除地层中有机物和无机物堵塞 ,提高注水量 ,降低泵注压力 ,在低渗油田注水井中具有推广价值。     

空气水两相段塞流的跟踪模拟及试验研究

分析了前人提出的段塞跟踪模拟方法的优缺点 ,根据液塞头部的加速压降和入口液塞长度分布特征对段塞跟踪模型进行了改进。采用面向对象技术 ,实现了水平和倾斜管道段塞流的跟踪模拟 ,并与多相流试验环道的空气水试验数据进行了对比。模拟结果表明 ,当不考虑加速压降时 ,用跟踪模型预测的压降低于实测值 ;当考虑加速压降时 ,用跟踪模型预测的压降高于实测值。在管道上固定位置测出的压力信号符合正态分布 ,管道上某一固定点处液塞头部和尾部的速度分布也符合正态分布。当不考虑气泡尾波作用时 ,液塞长度沿管线增长较慢 ,分布形状无变化 ;但是考虑气泡尾波作用时 ,在入口附近液塞长度平均值增长较快 ,统计分布沿管轴向呈对数正态分布。     

边水驱油藏调剖技术

针对边水驱油藏的地质及开发特点 ,提出了边水调剖技术 ,同时对调剖井点的选择、调剖剂的筛选、调剖剂用量的确定、调剖施工工艺等配套技术进行了研究。通过向优选的调剖井注入调剖剂 ,可以控制边水的侵入方向和推进速度 ,从而增大波及系数 ,提高最终采收率。 2 0 0 0年 5月到 1 1月 ,对高 1 0 4 5区块 8口井进行了边水调剖试验 ,共注入调剖剂 1 851 6m3。调剖后 ,内部井的含水率下降、产量回升 ,明显提高了区块的采收率。数值模拟预测结果表明 ,调剖增油超过 70 0 0t,投入产出比大于 1∶2。     

边界单元法三维应力分析计算程序

以三维弹性力学问题的基本解 (Kelvin解 )为基础开发了边界单元法三维弹性应力分析计算程序 ,并对其进行了验证。结果表明 ,该程序可用来求解三维弹性应力问题 ,尤其适用于三维应力集中问题。程序中采用动态分配内存 ,自动选点积分 ,并利用分块解法求解方程组 ,有效地节省了计算机资源 ,扩大了求解问题的规模。     

Vibration Analysis of Digital Radiography System for Large Container Inspection

The cantilever vibration characteristics of a digital radiography system were analyzed to predict the effect of vibration on the performance of a mobile container inspection system. The static deformation,vibration mode and natural frequency of the cantilever of the digital radiography system were calculated with the ALGOR Finite Element System to verify the strength and rigidity of the cantilever. The maximum amplitude of the cantilever vibration occurs as it starts accelerating. The predictions show good agreement with test results, indicating that the finite element model of the cantilever structure accurately models the mechanical characteristics.     

Design Optimization of Charger Based on PSPICE Simulation

The design of a high-frequency switching mode charger (HFSMC) was optimized using a PSPICE simulation of the charging system including a valve regulated lead-acid (VRLA) battery pack and the HFSMC.A high-frequency battery charging circuit model was developed to describe the battery dynamics when charging with DC current having high-frequency ripples. An IGBT circuit model, a high-frequency pulsed transformer coupling model and a silicon fast recovery diode model were also developed. Simulations were compared to laboratory measurements to verify the battery and system models. Simulation of the working states of an Fe-based nanocrystalline magnetic core used in the transformer shows that the transformer design can be optimized by adjusting the core gap and by employing an RC network. Further simulations show that the components in the output unit of the charger main circuit can also be optimized. Simulations also show that the battery dynamics Including the inductance should be considered for design optimization of the HFSMC.