多停泊基地约束下港口拖轮作业的一体化调度优化

在分析拖轮调度问题基本性质的基础上,结合多处理器任务调度理论,构建了以拖轮总作业时间最小化为目标函数、考虑多停泊基地条件下的一体化调度优化模型;针对问题特点设计了混合模拟退火算法并对其进行求解;以二维实整数的方式作为解的表现形式,在初始解的生成过程中加入首艘可用拖轮的启发式规则,并运用三点交叉的方式产生新解.数值实例结果表明,所提出的算法收敛性较好,求解结果比现行调度规则所得结果的优化率提高了20%.对系统参数的分析表明:移泊作业所占比例和到港船舶类型对目标函数的影响较大;在拖轮配备中,总作业时间对拖轮配备情况具有极弱的敏感性,而在不同装卸作业时间下总作业时间的变化无规律性.     

实现船舶稳性的多油舱自适应调度算法及仿真

针对油舱对船舶浮态与稳性的影响，研究了保持船舶稳性的多油舱自适应调度控制算法，并用WinCC (Windows Control Center)组态软件编写了船舶自动浮态调整仿真系统。在系统架构上，采用布尔逻辑表构建了油舱、泵、管路之间的连通关系，并根据浮态方程计算出舱群之间的调驳油量，再根据多变量多约束的自适应优化调度算法实现了油舱驳油过程中浮态的平衡。仿真结果表明调度算法可以对船舶的浮态进行有效调整，并保持船舶稳性，避免了由油舱油量分布不均给船舶带来的不利影响，保障了航行安全。     

峰值电量约束下的场桥能耗最小化问题研究

随着化石能源的大量使用带来的环境污染问题日益严峻,关注能源使用效率的集装箱港口绿色化运营研究成为近年来的热点之一.本文以集装箱堆场中需要执行预倒箱作业的场桥为研究对象,考虑场桥不同运行状态下的单位时间电量需求不同以及峰值电量实时约束,建立了以总能耗最小化为目标的多场桥调度问题的混合整数规划数学模型.继而,将关键变量利用非连续贝和连续贝两种不同的方式进行编码,将次级变量利用启发式规则进行解码,并设计了相对应的遗传算法交叉与变异方法.数值实验表明,连续贝编码方法表现更为优异;通过与Cplex在小规模算例中的比较,与粒子群算法及人工蜂群算法在大规模算例中的比较,验证了所设计遗传算法的有效性.同时,通过与传统策略的对比,表明本模型可以同时实现能耗总需求与峰值需求两方面的优化,从而可以为港口管理人员在不影响既定日常运营工作的前提下降低能源成本提供科学有效的指导.     

平顺移动模式下考虑加工时间与调整时间可分离的多目标流水车间批量调度

对平行顺序移动模式下考虑加工时间与调整时间可分离的多目标流水车间批量调度问题展开研究.构建以加工制造设备总停机次数、批量工件生产周期以及搬运批量工件的总次数为决策目标的基于分层序列法的多目标决策模型,利用该模型可确定批量工件的最优加工排序方案.建立平行顺序移动模式的加工与调整时间模型,该模型是求解生产周期的基础,也是为批量工件的最优调度方案制定生产作业计划的依据.提出并设计平行顺序移动模式下考虑加工时间与调整时间可分离的禁忌搜索算法对问题进行求解.研究结果表明:本研究可为平顺移动模式下考虑加工时间与调整时间可分离的批量生产流水车间选出批量工件的最优调度方案,同时可为批量工件的加工和加工制造设备的调整制定精确的生产作业计划.     

An effective estimation of distribution algorithm for parallel litho machine scheduling with reticle constraints

In order to improve the scheduling efficiency of photolithography, bottleneck process of wafer fabrications in the semiconductor industry, an effective estimation of distribution algorithm is pro-posed for scheduling problems of parallel litho machines with reticle constraints, where multiple reti-cles are available for each reticle type.First, the scheduling problem domain of parallel litho ma-chines is described with reticle constraints and mathematical programming formulations are put for-ward with the objective of minimizing total weighted completion time.Second, estimation of distribu-tion algorithm is developed with a decoding scheme specially designed to deal with the reticle con-straints.Third, an insert-based local search with the first move strategy is introduced to enhance the local exploitation ability of the algorithm.Finally, simulation experiments and analysis demonstrate the effectiveness of the proposed algorithm.     

Ho∞-based fault detection for nonlinear networked systems with random packet dropout and probabilistic interval delay

The fault detection problem for the nonlinear networked control system (NCS) with packet dropout and delay is investigated.A nonlinear stochastic system model is proposed to account for the NCS with random packet dropout and networkinduced non-uniformly distributed time-varying delay in both from sensor to controller (S/C) and from controller to actuator (C/A).Based on the obtained NCS model,employing an observer-based fault detection filter as the residual generator,the addressed fault detection problem is converted into an auxiliary nonlinear H∞ control problem.Then,with the help of Lyapunov functional approach,a sufficient condition for the desired fault detection filter is constructed in terms of certain linear matrix inequalities,which depend on not only the delay interval but also the delay interval occurrence rate and successful packet communication rate.Especially,a trade-off phenomenon between the maximum allowable delay bound and successful data packet transmission rate is found,which is typically resulted from the limited bandwidth of communication networks.The effectiveness of the proposed method is demonstrated by a simulation example.     

订货与发货整合批量调度问题

在对文题进行数学描述的基础上，建立求解该类问题的混合整数线性规划模型.证明问题NP 困难性并研究多项式可解子问题，进一步提出了3个启发式算法以及精确求解的分支定界算法.数值实验表明，所提出启发式算法以及分支定界算法的有效性与高效性.     

混合Jobshop炼钢-连铸重调度方法及其应用

炼钢-连铸生产过程中加工设备起、停时间经常会出现严重延迟,导致调度计划不可行. 目前人工调整,存在响应速度慢和调整结果不优化的问题. 对炼钢-连铸混合Jobshop重调度问题进行了分析,提出了正在作业炉次已分配设备不变的重调度方法. 并提出了求解策略,将原调度分解为两个子调度问题. 引入炉次操作状态参数β,建立了正在作业炉次的时间修正模型,构造了启发式方法进行求解.对于未作业炉次,建立了多目标非线性0-1 整数规划模型,构造了并行逆推启发式算法进行设备指派,采用线性规划求解各操作的开工时间.基于上述方法开发了动态调度软件应用于国内某大型钢铁企业,在缩短动态调度时间、减少钢水冗余等待时间方面取得了显著成效.     

A Dynamic Job Shop Scheduling Method Based on Ant Colony Coordination System

Due to the stubborn nature of dynamic job shop scheduling problem, a novel ant colony coordination mechanism is proposed in this paper to search for an optimal schedule in dynamic environment. In ant colony coordination mechanism, the dynamic .job shop is composed of several autonomous ants. These ants coordinate with each other by simulating the ant foraging behavior of spreading pheromone on the trails, by which they can make information available globally, and further more guide ants make optimal decisions. The proposed mechanism is tested by several instances and the results confirm the validity of it.     

加装无线报警器以快速查找线路故障

分析了线路故障时查线时间过长的主要原因,提出了在线路分支开关加装无线发射系统的解决办法。