微波辐射合成季铵盐型阳离子淀粉絮凝剂

研究了季铵盐型阳离子改性淀粉絮凝剂的微波辐射合成.该工艺反应时间短、产率高、操作简便,同时有效抑制了副反应的发生,提高了产品纯度.讨论了诸因素对反应的影响,通过正交试验确定了反应的最佳条件为:氢氧化钠、2,3-环氧丙基三甲基氯化铵与淀粉的摩尔比1.4∶1∶2.2,辐射反应时间1.5 m in,微波功率280 W.     

上海软土冻结加固冻胀防治技术的模拟试验研究

结合上海地铁建设工程实际，采用模拟试验的方法，分别对预留管拔除法和热盐水循环法抑制冻胀的机理、防治冻胀的效果以及影响冻胀的相关因素进行综合分析和试验研究，从而为上海软土冻结加固冻胀的防治提供了理论依据和有关的参考数据。     

介观电路中量子噪声压缩条件及压缩参量对量子涨落的影响

以量子化介观电路为基础,侧重数值方法考察和分析压缩参量对介观电路中电压、电流量子涨落的影响.结果表明,电压、电流量子涨落的乘积随压缩参量(r,θ)的变化曲线出现2个峰值,峰值出现在相同的r值处,其峰值比电压或者电流量子涨落的峰值大,且曲线关于θ=180°对称.     

多头小直径深层搅拌防渗墙在水利工程中的应用

对多头小直径深层搅拌防渗墙在水利工程中应用的原理和设计、施工的方法进行了论述,并对工程实例应用的效果进行了评价.     

磁透镜技术及其在沉积金刚石/类金刚石薄膜中的应用

阐明了磁透镜原理，依照磁透镜理论和几何光学理论，给出一种确定磁透镜位置的方法。并将磁透镜技术应用到直流等离子射流化学沉积金刚石薄膜／类金刚石薄膜装置中，很好地消除了边界效应，实现高速大面积沉积高纯度金刚石薄膜／类金刚石薄膜的目标。     

冲击破煤过程中能量耗散的理论分析

介绍了能量在冲击式破煤过程中的产生、传递和耗散过程以及能量最终的分布范围;运用应力波的方法分析了应力波在煤体中传播过程,并得出能量在衰减过程中衰减率的计算方法;还分析了剥落厚度的计算方法,并得出正弦应力波在煤体中传播时的冲劈厚度和最大煤块尺寸的关系;根据冲击规律和能量的传递特征对能量的传递过程进行了分析,并求出冲击消耗能量和最小散逸能之间的关系,指出了要使煤块破碎必须满足冲击消耗能量要大于最小散逸能。     

煤与生物质共超临界水催化气化制氢的实验研究

在压力为20～25MPa、停留时间为15～30s、：NaOH添加量(质量分数)为0．1％、反应器外壁温度为650℃的条件下，对煤与生物质的模型化合物羧甲基纤维素钠(CMC)在超临界水环境中的催化气化制氢性能进行了研究，探讨了物料浓度、压力以及停留时间对煤与CMC共气化制氢的影响．实验结果表明：煤与CMC二共超临界水催化气化制氢的主要气体产物是H2、CO2和CH4，H2的体积分数可高达60％以上；增加物料浓度、升高压力有利于提高产氢率，但延长停留时间不利于氢气的制取．     

The fate of injectant coal in blast furnaces: The origin of extractable materials of high molecular mass in blast furnace carryover dusts

The aim of the work was to investigate the fate of injectant coal in blast furnaces and the origin of extractable materials in blast furnace carryover dusts. Two sets of samples including injectant coal and the corresponding carryover dusts from a full sized blast furnace and a pilot scale rig have been examined. The samples were extracted using 1-methyl-2-pyrrolidinone (NMP) solvent and the extracts studied by size exclusion chromatography (SEC). The blast furnace carryover dust extracts contained high molecular weight carbonaceous material, of apparent mass corresponding to 10⁷?10⁸ u, by polystyrene calibration. In contrast, the feed coke and char prepared in a wire mesh reactor under high temperature conditions did not give any extractable material. Meanwhile, controlled combustion experiments in a high-pressure wire mesh reactor suggest that the extent of combustion of injectant coal in the blast furnace tuyeres and raceways is limited by time of exposure and very low oxygen concentration. It is thus likely that the extractable, soot-like material in the blast furnace dust originated in tars is released by the injectant coal. Our results suggest that the unburned tars were thermally altered during the upward path within the furnace, giving rise to the formation of heavy molecular weight (soot-like) materials.     

Influence of overpressure on coalbed methane reservoir in south Qinshui basin

In theory, from the high temperature and pressure during the coal generating gas to the present low temperature and pressure of coalbed methane reservoir, the accumulation of coalbed methane was from oversaturated to undersaturated. The gas content of the coalbed methane reservoir in the south Qinshui basin was 12-35.7 m3/t. According to the isotherm and measured gas content of No. 3 coal, the adsorbed gas content in some wells was highly saturated and oversaturated, which was hard to theoretically understand. In addition, there were no thermogenic and biogenic gases at the late stage in the south Qinshui basin. This article proposed that the overpressure was the main reason for the present high saturation of the coalbed methane reservoir. In early Cretaceous, the coalbed methane reservoir was characterized by overpressure and high saturation caused by gas generation from coal measure source rocks. In late Cretaceous, the coalbed methane reservoir was rapidly uplifted, and with the temperature and pressure decreasing, the pressure condition of adsorbed gas changed from overpressure to normal-under pressure, which resulted in the high saturation and gas content in the present coalbed methane reservoir.     

蜂窝网络中基于遗传算法的信道分配

信道分配问题属于组合优化中的NP完备问题 ,为了更有效的利用频率资源 ,在遗传算法的基础上提出了一种新的信道分配方法·在信道分配中主要考虑三种限制 :同频限制、邻频限制和同位置限制·目标是得到一个用最少的信道数 ,满足话务需求和电磁兼容限制的信道分配方案·采用了最小间隔编码方案 ,利用固定遗传算子 (交叉和变异 ) ,在整个迭代过程中始终满足话务需求的要求·提出了几种遗传算子并进行了验证 ,比较结果表明选择性变异技术能得到很好的结果·对几个著名的benchmark问题进行仿真 ,结果表明 ,它对解决信道分配问题是一个非常有效的方法