孔系加工机构中曲拐传动的全力动平衡

针对孔系加工机构中曲拐传动存在的振动问题 ,提出了利用内平衡的方法实现曲拐轴的动平衡 ,并通过“力平衡法”实现曲拐传动机构的摆动力和摆动力矩完全力平衡 .减小或消除了整个传动机构的振动 ,提高了孔系加工的加工精度 .     

带传动中弹性滑动的概率分析

通过对带传动中弹性滑动的分析,引入带与带轮之间摩擦、两边张力的随机因素,得到了带传动的滑动参数的概率特性.     

一种车辆用差动齿轮式无级变速机齿轮强度的计算

研究一种车辆用控制式差动齿轮式无级变速机的转速、效率、功率流以及转矩特性。结果表明，随iA变化，功率流、转矩在低速段变化很大。在此基础上进而探讨了模型试验机的齿轮疲劳强度核核计算点的确定问题，以及尖峰负荷下静强度校校的处理方法。最后指出实用设计时应按车型研究，     

基于PLC的智能型自动重合闸控制系统研究

传统电磁式自动重合闸具有种种弊端和不足之处,采用基于PLC实现的自动重合闸,代替其内部的继电器,通过软件编程代替其内容的硬件连接线,既可以克服传统继电器的种种弊端,也可以方便实现重合闸控制功能的扩展.同时,利用PLC进行其软、硬件设计,通过后加速保护与前加速保护,实现自动重合闸的智能型控制,还可以节省电气元件、方便硬件接线、降低故障率,提高控制系统的供电可靠性和实用性.     

Minimizing crosstalk for high-speed and high-density bus systems using the sample-decision method

This paper presents a method based on a sample-decision （SD） circuit to suppress crosstalk and noise for a high-speed and high-density bus system. A method to count the number of times of SD for different length of transmission lines is presented and a bit error rates （BERs） formula is giv- en by the SD circuit. It is shown that for long transmission line systems, multiple SD circuits can improve the BERs significantly. Circuits simulation for single SD method is also done, it is found that when the amplitude peak values of the superposed crosstalk and noise are less than half of the corresponding signal ones, they will be eliminated completely for the cases investigated.     

Selective transmission and channel estimation in massive MIMO systems

Massive MIMO systems have got extraordinary spectral efficiency using a large number of base station antennas, but it is in the challenge of pilot contamination using the aligned pilots.To address this issue, a selective transmission is proposed using time-shifted pilots with cell grouping, where the strong interfering users in downlink transmission cells are temporally stopped during the pilots transmission in uplink cells.Based on the spatial characteristics of physical channel models, the strong interfering users are selected to minimize the inter-cell interference and the cell grouping is designed to have less temporally stopped users within a smaller area.Furthermore, a Kalman estima-tor is proposed to reduce the unexpected effect of residual interferences in channel estimation, which exploits both the spatial-time correlation of channels and the share of the interference information. The numerical results show that our scheme significantly improves the channel estimation accuracy and the data rates.     

2D-3D异质结结构中超短耦合长度的研究

采用时域有限差分法分析、模拟和设计了2D-3D异质结结构中的定向耦合器，并且通过非平面和平面的优化设计实现了小于2a（a为晶格常数）的超短耦合长度。研究结果表明，当位于耦合区域的晶格常数由1.25a-1.25a-1.25a-1.25a变为1.5a-2.0a-1.5a时，获得的耦合长度小于3a；同时将位于输入波导和耦合波导之间介质柱的宽度减小到0.18a，可获得小于2a的超短耦合长度。该耦合长度对于实现密度集成电路的小型化非常重要。     

用于无线数字传输的双相编码调制

阐述了可变相移键控(VPSK)和甚小频移键控(VMSK)基带数字调制技术编解码原理，给出了双相码基带信号频谱的一般数学表达式和计算机仿真得出的频谱图.对VPSK和VMSK信号的频谱 利用率作出初步估计，并提出了基于FPGA的编解码器实现方案.     

按K,φ和γmin综合解析法设计曲柄摇杆机构

分析了满足给定 K,φ和γmin值的曲柄摇杆机构的综合问题 ,推导了相应的机构综合解析式 ,并绘制了满足工程设计要求的综合曲线图谱     

美国ST-3.5型铲运机传动系统评析

在叙述ST-3.5型铲运机传动系统的驱动方式、传动原理、技术性能的基础上,对其传动系统本身、全动力变速箱、强制性自锁差速器以及润滑系统的结构和润滑方式等方面的特点进行了介绍。