基于Elmore模型的Steiner树问题的求解

建立了一种求解基于Elmore延迟模型的Steiner树问题的遗传算法。针对Steiner树问题的特点,在引入一种新的具有自适应性的杂交概率和变异概率的基础上,提出了面向Steinet树问题的遺传算法和一种构造染色体的新方法。提供了遗传算法的结构并讨论了遗传算子。分析了基于时间和空间的算法复杂性。     

含有纯滞后对象的控制方法

评述纯滞后对象控制的两种典型方法─—大林算法和纯滞后补偿法的原理、优缺点、设计要求及存在问题，并讨论了两者的联系。     

周期信号的孔径抖动及其去除

孔径抖动是指模数转换器采样周期之间出现的相位抖动 ,是由各时钟周期边沿出现时刻的不确定性导致的。当输入信号频率较高时孔径抖动是模数转换器信噪比下降的一个重要原因。对数据采集系统中的孔径抖动进行了仿真实验 ,介绍了反卷积算法 ,并利用反卷积算法对周期信号的孔径抖动进行了去除。仿真结果表明该方法是有效可行的     

Radar Imaging Based on Iterative Algorithms

It has long been realized that the problem of radar imaging is a special case of image reconstruction in which the data are incomplete and noisy. In other fields, iterative reconstruction algorithms have been used successfully to improve the image quality. This paper studies the application of iterative algorithms in radar imaging. A discrete model is first derived, and the iterative algorithms are then adapted to radar imaging. Although such algorithms are usually time consuming, this paper shows that, if the algorithms are appropriately simplified, it is possible to realize them even in real time. The efficiency of iterative algorithms is shown through computer simulations.     

Petri网络在无控制交叉口延误分析中的应用

选用比较适合描述系统组织结构和动态行为的Petri网络模型对主路优先通行的无信号交叉口运行过程建立HSPN模型．在此基础上，结合间隙接受理论，对无控制交叉口进行平均延误分析探索，为交叉口仿真控制软件的研发奠定了算法基础。     

非线性模糊直接鲁棒自适应控制的后推设计

采用模糊直接控制方法,针对一类非线性多入多出系统,提出了一种带有连续鲁棒项的鲁棒自适应控制方法.在此基础给出了高阶多入多出系统的鲁棒自适应的后推设计方法.在鲁棒项合理简化的情况下,给出了系统Lyapunov意义下的稳定性证明,简略分析了各设计参数的物理意义及其对系统性能的影响.理论分析和仿真实验均显示,本方法可以使系统全局渐近稳定,且选取恰当的设计参数可保证系统对输入信号的跟踪达到任意精度;并且由于鲁棒项的引入可使系统的设计更具灵活性.     

Subset threshold autoregression

We develop in this paper an efficient way to select the best subset threshold autoregressive model. The proposed method uses a stochastic search idea. Differing from most conventional approaches, our method does not require us to fix the delay or the threshold parameters in advance. By adopting the Markov chain Monte Carlo techniques, we can identify the best subset model from a very large of number of possible models, and at the same time estimate the unknown parameters. A simulation experiment shows that the method is very effective. In its application to the US unemployment rate, the stochastic search method successfully selects lag one as the time delay and five best models from more than 4000 choices. Copyright © 2003 John Wiley & Sons, Ltd.     

数字调节器的切换方法分析

本文在分析数字调节器控制算法的基础上，重点分析了数字调节器正常运行时各运行状态间的切换方法。     

1次+3次平面多项式系统的代数分类

采用代数不变式和空间直和的理论,对1次 3次平面多项式系统在保证轨线走向不变的前提下进行代数分类,共分成40个等价类.     

一种利用绝对最小Lipshitz延拓的医学图像插值算法

提出一种基于最小Lipshitz延拓的图像插值半隐式算法,并用医学图像放大实验初步验证了算法的有效性.