New species of Hygiella Mesnil (Diptera: Tachinidae), parasitoids of leaf insects (Phasmatodea: Phylliidae)

The Oriental genus Hygiella Mesnil is revised: three species are described as new, Hygiella angustifrons sp. nov., Hygiella luteipes sp. nov. and Hygiella proclinata sp. nov., and two known species are re-described, Hygiella nigripes Mesnil and Hygiella pygidialis Mesnil. A key to these five species is provided. The host of H. proclinata, Phyllium siccifolium (Linnaeus) (Phasmatodea: Phylliidae), is recorded for the first time as a host of the Tachinidae. The systematic position of Hygiella is discussed and the genus is placed in the tribe Acemyini (Exoristinae) based on the structure of the male terminalia.     

聚偏氟乙烯（PVDF）/聚己内酯（PCL）共混体系的晶体结构和形貌

使用偏光显微镜（POM）和扫描电子显微镜（SEM）等测试手段,研究了PVDF/PCL共混体系在不同配比和结晶温度下晶型结构、球晶和片晶形貌的变化规律。结果表明：PVDF在低温下形成α型球晶,在高温下形成γ型球晶;两种不同晶型的球晶尺寸均随着结晶温度的升高而增大;α型PVDF环带球晶的环带间距随着体系内PCL含量的增多而增大。此外,共混体系内γ型PVDF球晶的含量也随着PCL含量的增大而增大。     

Bionomics,behaviour and immature stages of Pelecotoma fennica (Paykull) (Coleoptera: Rhipiphoridae)

Ptilinus fuscus (Anobiidae) was confirmed as the host species of Pelecotoma fennica (Rhipiphoridae, Pelecotominae). Females of Pelecotoma oviposit into the wood infested by the host larvae. First-instar larvae are elongate, unsclerotized, very different from the triungulinid larvae known in other rhipiphorids. They search actively for the host larvae in the wood; no phoresy is involved in the life cycle. The first-instar larvae temporarily paralyse the host larva and enter its body, overwintering (some perhaps more than once) as an endoparasite. In the spring of the year of emergence, the endoparasite engorges enormously (without moulting) and develops a special sclerotized caudal structure which is then used for perforation of the host's integument. The larva undergoes a further four ectoparasitic instars. The fifth (i.e. fourth ectoparasitic) instar differs considerably from the preceding three, and is capable of boring through the wood to prepare the emergence gallery for the adult. Pupation occurs in the wood. The rate of parasitization may locally far exceed 50%. Superparasitization by the first-instar larvae is possible, but usually only 1 larva survives to the ectoparasitic stage. Larval morphology of Pelecotoma is described and illustrated. Additional data on bionomics and larval morphology are also presented for the genus Metoecus (Rhipiphorinae). Comparing the biology and larval morphology of Pelecotoma with other Rhipiphoridae, it is assumed that ancestral rhipiphorids may have been xylophilous Tenebrionoidea with predaceous or omnivorous larvae, and that the ‘triungulinid’ larvae and phoretic habits may not belong to the groundplan of the family Rhipiphoridae. The widespread opinion considering Rhipiphoridae closely related to the family Mordellidae is questioned.     

海黍子(Sargassum muticum)不同分枝的形态观察与离体培养

【目的】观察海黍子不同分枝的形态特征,并研究离体培养条件下三生分枝的生长和生殖托数量的变化情况。【方法】采用形态观察法和离体培养技术,分别研究三生分枝在次生分枝上的分布、其数量与次生分枝长度的关系、其长度与生殖托数量的关系,并对离体培养前后三生分枝特定生长率及生殖托数量变化情况进行研究。【结果】三生分枝数量与次生分枝长度呈正相关;生殖托数量同三生分枝的长度呈正相关。离体培养实验期内,生殖托数量增长一般不超过2个;三生分枝均有不同程度的增长,特定生长率多数集中在0%~2%。【结论】海黍子不同分枝尤其是三生分枝的生长和发育有助于海黍子有性繁殖过程,可以保障海黍子群体的不断繁衍。     

Distribution and characterization of species of Gyrodactylus Nordmann, 1832 (Monogenea) parasitizing salmonids in the UK,and their discrimination from G. salaris Malmberg, 1957

The reported pathogenicity of the monogenean Gyrodactylus salaris Malmberg, 1957 on Atlantic Salmo salar in Norway has necessitated a national survey of salmonid sites throughout the British Isles to determine which species of the genus Gyrodactylus are resident on these hosts in British waters. Eight morphotypes were identified following examination of the opisthaptoral sclerites at both the light and scanning electron microscope level. Gyrodactylus truttae Gläser, 1974 was found on wild brown trout Salmo trutta in Scotland, England and Wales with an uncharacteristic morphotype, having long, thin marginal hooks. Two morphotypes of Gyrodactylus derjavini Mikailov, 1975 were recorded for the first time from Britain. G. caledoniensis n. sp. from Scottish S. salar is erected, based on differences in the shape and size of the marginal hooks. Two possible new species from English Salvelinus alpinus and a possible new species from Welsh S. salar and Scottish O. mykiss are described.     

预处理组织对低碳钢IQ&P工艺下组织及性能影响

采用γ单相区和γ+α双相区轧制并淬火工艺以及双相区再加热-淬火-碳配分( IQ&P)工艺,研究预处理组织对低碳钢室温状态多相组织特征及力学性能的影响规律. 实验用低碳钢经两种工艺轧制并淬火处理,获得马氏体和马氏体+铁素体的预处理组织,再经双相区IQ&P工艺处理后均获得多相组织. 马氏体预处理钢的室温组织由板条状亚温铁素体、块状回火马氏体以及一定比例的针状未回火马氏体和8. 2%的针状残余奥氏体组成;马氏体+铁素体预处理钢由板条状亚温铁素体、块状和针状未回火马氏体以及14. 3%的短针状或块状残余奥氏体组成. 在相同的双相区IQ&P工艺参数下,预处理组织为马氏体的钢抗拉强度为770 MPa,伸长率为28%,其强塑积为21560 MPa·%;而预处理组织为马氏体+铁素体的钢抗拉强度为834 MPa,伸长率增大到36. 2%,强塑积达到30190 MPa·%,获得强度与塑性的优良结合.     

基于多重分形谱的碳纤维复合材料表面评定方法

碳纤维复合材料（CFRP）表面的多重分形谱能表征其表面形貌特征.用TalyScan 150表面测量仪测量了CFRP的表面形貌,使用小波变换算法计算了其多重分形谱.结果表明,CFRP 3D表面的形貌与其多重分形谱密切相关,Lipschitz指数的范围可以表征表面的粗糙度,多重分形谱的数值可以表征表面的波峰和波谷的分布.同传统表面粗糙度分形维数表征方法相比,多重分形谱能表征加工表面形貌的局部特征.     

氧分压对IWO薄膜表面形貌及光电性能的影响

掺钨氧化铟(In2O3:W,IWO)薄膜是一种新型的透明导电氧化物(TCO)薄膜,其中W与In之间存在着较高的价态差,使得IWO薄膜与其他TCO薄膜相比,在相同的电阻率条件下具有载流子浓度低、迁移率高和近红外区透射率高的特点.利用直流磁控溅射法制备了IWO薄膜,利用X射线衍射、扫描电子显微镜、霍尔效应及分光光度计表征了薄膜的表面形貌及光电性能.在工作压力1 Pa、氧分压为2.4×10-1Pa的条件下,实验中制备的IWO薄膜最佳电阻率为6.3×10-4Ω.cm,最高载流子迁移率为34 cm2V-1s-1,载流子浓度达到2.9×1020cm-3,可见光平均透射率约为85%,近红外平均透射率大于80%.