应用测力—落刀装置对积屑瘤、鳞刺的研究

本文研制了一种测力—落刀装置,对积屑瘤和鳞剌的某些问题进行了试验研究。结果表明:在积屑瘤存在的区域内,由于刀具实际前角的增加,以及切屑与积屑瘤的接触长度小于自然接触长度,从而导致了切削力的降低。积屑瘤不是整体稳定不变的,也不是高频地整体脱落后再重新生长。而是基体比较稳定,头部产生高频的分裂、成长,其分裂的部分留在工件表面成为鳞剌,同时,引起了切削力的较大波动。切削力动态分量越大,相应的鳞剌高度越高。     

Autophagy and other vacuolar protein degradation mechanisms

Autophagic degradation of cytoplasm (including protein, RNA etc.) is a non-selective bulk process, as indicated by ultrastructural evidence and by the similarity in autophagic sequestration rates of various cytosolic enzymes with different half-lives. The initial autophagic sequestration step, performed by a poorly-characterized organelle called a phagophore, is subject tofeedback inhibition by purines and amino acids, the effect of the latter being potentiated by insulin and antagonized by glucagon. Epinephrine and other adrenergic agonists inhibit autophagic sequestration through a prazosin-sensitive ₁-adrenergic mechanism. The sequestration is also inhibited by cAMP and by protein phosphorylation as indicated by the effects of cyclic nucleotide analogues, phosphodiesterase inhibitors and okadaic acid.Asparagine specifically inhibits autophagic-lysosomal fusion without having any significant effects on autophagic sequestration, on intralysosomal degradation or on the endocytic pathway. Autophaged material that accumulates in prelysosomal vacuoles in the presence of asparagine is accessible to endocytosed enzymes, revealing the existence of an amphifunctional organelle, the amphisome. Evidence from several cell types suggests that endocytosis may be coupled to autophagy to a variable extent, and that the amphisome may play a central role as a collecting station for material destined for lysosomal degradation.Protein degradation can also take place in a salvage compartment closely associated with the endoplasmic reticulum (ER). In this compartment unassembled protein chains are degraded by uncharacterized proteinases, while resident proteins roturn to the ER and assembled secretory and membrane proteins proceed through the Golgi apparatus. In thetrans-Golgi network some proteins are proteolytically processed by Ca²⁺-dependent proteinases; furthermore, this compartment sorts proteins to lysosomes, various membrane domains, endosomes or secretory vesicles/granules. Processing of both endogenous and exogenous proteins can occurr in endosomes, which may play a particularly important role in antigen processing and presentation. Proteins in endosomes or secretory compartments can either be exocytosed, or channeled to lysosomes for degradation. The switch mechanisms which decide between these options are subject to bioregulation by external agents (hormones and growth factors), and may play an important role in the control of protein uptake and secretion.     

双轴等拉低周疲劳实验装置

本文给出能在一般单向加载液压疲劳试验机上做双轴等拉低周疲劳实验研究的双向拉伸装置,并对有关影响因素进行了讨论。 本试验是在百吨液压低周疲劳试验机上进行的。双向拉体装置已经受近百万次疲劳载荷,其中交变载荷幅围5.5,t亦经受近20万次。在使用过程,各构件完好合手使用要求,将十字试样进行低周疲劳断裂试验,成功地开出合格裂纹,用它进行超速条件下叶轮材料性能研究亦取得初步结果。可以认为它适用于平而应力集中问题低周疲劳性能的研究。若使用液压高、中周疲劳试验机,它还可用于双轴载荷下裂纹试样裂纹扩展的研究。 本文指出了双向拉伸装置有待改进的方面。     

Mach的面向对象的设备管理

目的为了设计和实现主式实时操作系统ＣＯＳＩＸ Ｖ２．０／ＲＴ平台,对Ｍａｃｈ３．０微内核的面向对象设备管理的源程序进行剖析。方法依据Ｍａｃｋ的Ｉ／Ｏ管理机制分析源程序,以并行接口为端口编写通讯驱动程序,并验证其正确性。结果 在分析的基础上,通过修改有关驱动程序的接口,实现了两台Ｍａｃｈ机或Ｍａｃｈ与基于ＤＯＳ机之间的通信。结论Ｍａｃｈ３．０采用端口和消息机制,Ｉ／Ｏ接口支持的设备驱动程序２独立于设     

非离子表面活性剂非均相光催化降解试验研究

以非离子型表面活性剂－脂肪醇聚氧乙烯醚为目标污染物,投加适量光敏半导体为催化剂,在高压汞灯照射下进行实验,在探讨各种影响因素作用的基础上,提出了在弱紫外辐照下使ＡＥＯ－９降解的最佳条件组合,为逐步利用自然光源催化氧化表面活性剂提供科学依据。     

药物盐酸曲普利啶热氧降解历程及动力学研究

采用热重法、微分热重法和差热分析法研究药物盐酸曲普利啶在空气流中的热氧降解历程及动力学,从而发现该药物的热氧降解过程由５个紧连步骤组成．用Ｃｏａｔｓ－Ｒｅｄｆｅｒｎ方程进行动力学处理,确定盐酸曲普利啶热氧降解的表观反应级数均为１．１,反应活化能分别为６６．５,１１３．７,１１６．２,１５３．８和１８０．６ｋＪ／ｍｏｌ．     

仿复眼成像的实验模拟研究

利用计算机和图像卡对图像的处理功能,对平面微透镜阵列的多重像进行适当地处理来模拟并列型复眼的“镶嵌像”,对构成“镶嵌像”的拼法、像元数的不同做了对比实验,最后对影响镶嵌像的诸因素做了对比分析。     

Linux设备驱动开发方法及应用实例

介绍了基于LKM(linuxkernelmodel)的Linux设备驱动开发方法,完成了THIPC-7462测控模板的驱动程序,并讲述了其在THMR-V视觉临场感遥控系统上的具体应用.     

多通道微位移报警装置

介绍了以89C52为核心的多通道微位移报警装置的整体结构、工作原理及检测系统的软硬件设计．微处理器实时检测多路传感器的位移值，超过设定的值时系统进行报警，并通过通信接口将检测数据上传至计算机，同时利用计算机的多媒体优势进行报警．实际运行结果表明：该系统稳定性好，精确度高，达到了预期的性能指标要求．     

圆纬机电子选针器下位机控制系统的研究与实践

本文以PC104为上位机，89C51单片机为下位机的主从两级控制系统的电子选针硬软件设计。重点阐述了下位机存储管理程序和电子选针过程的数据读取程序的设计。系统经调试运行满足圆纬机电子选针的要求，实现了多路电子选针的目的。