山东潍坊某办公大楼整体平移技术

采用钢筋混凝土包柱夹墙式托换结构和高性能工程塑料滚轴，对某办公大楼整体平移，监测结果表明，房屋平移6m后整体性提高。平移的成功以及由此取得的明显经济与社会效益，表明本工程设计方案与施工技术先进合理，可为类似整体平移工程提供参考。     

连铸板坯外形的在线检测方法

介绍了板坯外形在线检测的测量原理，计算方法，并给出了实验测量方法，过程及计算机图像处理系统的处理结果，该方法简单，实用，精度较高。     

地基基础-坝体体系动力特性及地震反应分析的有限元与无限元耦合法

编制了有限元及有限元—无限元耦合计算程序，利用其分析了广西源口拱坝在有限域及无限域地基下的动力特性与动力响应，并与常规刚性地基下坝体的动力特性、动力响应进行比较，得出结论：1．弹性地基下拱坝自振频率减小、动位移最大值增大；2．耦合分析法具有较高的精度和显著的经济性，是工程应用中值得推广的一种分析方法。     

火电厂炉管温度在线实时监测系统的应用研究

为保证电力设备安全经济运行 ,建立开放的现场数据采集、分析和组态的实时监控系统 ,并将其传送至管理信息系统 (MIS) ,可获得生产现场的信息 ,使得设备检修科学化。该文论述了一种基于ADO技术的炉管温度实时监测与分析系统 ,该系统由运行监测、监测报表等组成 ,并通过组态的使用 ,使实际运行具有了灵活性和通用性     

平面弹性连杆机构的KED分析

本文放弃了文献中引用的运动学假设和瞬时结构假定,考虑了刚体运动和弹性变形运动之间的耦合项,分析了梁的横向位移对轴向应变的影响。利用虚位移原理和达明贝尔原理,建立了构件和系统的运动微分方程式。以四杆较接机构为例,进行了KED分析。从所得结果可以看出,本文更好地反映出弹性对机构动态误差的影响。     

铝合金变形抗力的实验研究

采用恒应变速率凸轮式形变压缩试验机试验了四种铝合金材料的变形抗力 ,分析了应变率和应变速率对变形抗力的影响 ,结果表明随应变的增加 ,变形抗力以近似幂函数关系增加 ,在此基础上建立了简单、适用的变形抗力计算模型     

轧机设备油液监测技术的应用

通过对轧机关键设备的润滑油进行定期跟踪监测 ,利用理化分析、光谱分析和铁谱分析等摩擦学分析手段 ,及时掌握油品的使用状况和设备的磨损情况 ,以实现对设备进行故障诊断和视情维修     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

黄土滑坡形变分析预报方法研究

基于黄土滑坡的变形特征和演化规律，利用滑体总形变量与滑坡演变过程形变量之间的逼近关系，建立了一种简单，实用的滑坡预报数学模型，其效果良好，为黄土滑坡时间预报由定性分析向定量评价提供了途径。     

Using Oil Analysis to Study the Wear Condition of Bearing in Trunnion of Convertor During/After Run-in Period

1Introduction Convertorisoneofthemainequipmentofsteel making.Thebearingsinthetrunnionofconvertorarecharacterizedby low speed,heavy loadandhuge dimension.Theyrevolve slowlywhenmoltensteelisaddedoremptied.Theirlife expectancyis20years.Incasetheyexperiencefailurein operation,theoutputoftheconvertorandeventhatofthe wholeproductlinewouldbeaffectedandhugelosswouldbe resultedin.Therefore,itisveryimportanttomasterthe workingconditionsofthebearings.Vibrationandoilanalyses aretwomaintechniquestomonito…