INFLUENCE OF POLYMER CHARACTERISTICS AND MELT-SPINNING CONDITIONS ON THE PRODUCTION OF HIGH RANDOMNESS 60PHB/PET THERMOTROPIC LIQUID CRYSTAL COPOLYESTER FIBER

Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible 'H-NMR spectrometer. High tenacity, high module fiber is prepared by melt spinning in liquid crystal phase. The effect of molecular weight, shear rate, temperature as well as spinning drawn ratio on the mechanical behavior of 60PHB / PET copolyester fiber are shown that, lower shear rate (2~ 10 s~(-1)), higher temperature melting (300℃ ), lower temperature spinning (280℃ ) and higher molecular weight are favourable to the increase of the fiber mechanical properties. With the variance of drawn ratio, fiber mechanical property has a transition point due to traversion from shear-orientation to drawn-orientation. The copolyester fiber has high crystallinity, high orientation at the crystalline region, high chain orientation and high regular fibrillar structure.     

Abnormal dielectric characteristics of PMN-32%PT single crystal under dc bias

It has been reported that the single crystal of relaxor ferroelectrics (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-xPT) with the compositions near the morphotropic phase boundary (MPB, 0.28相似文献   

NSRL-XAFS光束线弧矢聚焦双晶单色器设计

针对XAFS光束线能量动态扫描的实验特点，介绍了弧矢聚焦双晶单色器的物理设计：包括晶体光学结构、性能参数计算、晶体热载分析和弧矢弯曲原理．弧矢缩比选择为1：4．88，水平接收角由原来的1mrad拓宽到3mrad，在不改变基本配置的情况下，获得了样品上束癍缩小、光子通量高达半个量级以上的增益．     

萃取浮选光度法测定微量钼的研究及应用

研究了用甲苯萃取浮选Mo(Ⅴ)—SCN~-—Kφ三元络合物的各种条件。在硫酸介质中,紫红色络合物最大吸收波长位于585nm,摩尔吸光系数为2.8×10~5l·mol~(-1)·cm~(-1),钼量在0—10μg/25ml范围内符合比耳定律。大量常见元素均不干扰,40倍的钨(Ⅵ)亦不干扰钼的测定,方法已应用于钨矿中微量钼的测定,其结果令人满意。     

电荷掺杂和杂原子掺杂聚硅烷的比较性理论研究

本文利用GAUSSIAN 03程序包中的密度泛函理论,在B3LYP/6-31G(d)水平下,对聚21硅烷、电荷掺杂的聚21硅烷以及杂原子(硼和磷)掺杂的聚21硅烷进行几何全优化,并对它们的几何结构和自旋密度进行了比较性理论研究.结果表明,电荷掺杂能使聚硅烷的Si—Si键长增长,其极子分布几乎遍及了聚21硅烷的整个链;而杂原子(B、P)的掺杂对聚硅烷的影响主要集中在与B、P原子相邻的Si原子上,极子分布仅局域在B、P原子附近的3~5个原子上.     

淬火工艺对铬结构钢显微组织和机械性能的影响

本文研究了淬火工艺对低和中碳铬钢的显微组织,冲击韧性和断裂机制的影响,得出了无论是低碳,还是中、高碳钢,当奥氏体长大倾向稍大时,采取提高加热温度进行淬火的工艺均为不可取的结论。     

双核铕－邻甲基苯甲酸－邻菲罗啉三元配合物的晶体结构

双核铕－邻甲基苯甲酸－邻菲罗啉三元配合物的晶体结构王瑞芬，王明昭，金林培，蔡冠梁（北京师范大学化学系，１００８７５，北京；解放军防化指挥工程学院，１０２２０５，北京；第一作者，４４岁，女，副教授）关键词铕；三元配合物；晶体结构分类号Ｏ７４１．６；Ｏ６...     

Improvement in hydrogen storage performance of Mg by mechanical grinding with molten salt etching Ti3C2Clx

Mg-based materials are currently a hot research topic as hydrogen storage materials due to their considerable theoretical hydrogen storage capacity. However, the kinetic performance of hydrogen absorption and desorption of Mg is too slow and requires high temperature, which seriously hinders the application of this material. MXene is a new type of two-dimensional material with significant role in improving thermodynamics and kinetics. In this experiment, a two-dimensional layered MXene containing Cl functional group was prepared by molten salt etching using the Ti-containing MAX phase as the raw material. Then different ratios of Ti₃C₂Cl_x were uniformly dispersed onto the surface of Mg by high energy ball milling. The samples were characterized by hydrogen absorption and desorption kinetics, SEM, XRD, XPS, and DSC to investigate the effect of Ti₃C₂Cl_x on the hydrogen absorption and desorption performance of Mg. The onset hydrogen absorption temperature can be reduced to room temperature and the hydrogen release temperature is reduced by 200 ​°C by doping Ti₃C₂Cl_x. And there is also 5.4 ​wt% hydrogen storage in the isothermal hydrogen absorption test at 400 ​°C. The results of DSC demonstrate that the E_a of Mg+15 ​wt% Ti₃C₂Cl_x was reduced by 12.6% compared to pristine Mg. The ΔH is almost invariable. The results of XPS show that the presence of multivalent Ti promotes electron transfer and thus improves the conversion between Mg²⁺/Mg and H⁻/H. This study provides a guideline for further improving the hydrogen absorption and desorption performance of Mg-based hydrogen storage materials.     

双模随机晶体场对混合自旋1/2和自旋1纳米管上相变的影响

本文利用有效场理论研究了自旋1/2和自旋1混合Blume-Capel模型在具有双模随机晶体场的圆柱形Ising纳米管上的磁化和相变. 通过数值计算,我们得到了随温度和随机晶体场参数变化的相图和磁化强度. 结果表明: (1) 改变晶体场的概率和比例,双模随机晶体场可以描述不同掺杂原子对自旋的作用;(2) 对于一定的概率值、负或正的晶体场和晶体场的比例值都存在临界点;(3) 系统显示多种相变温度,一阶相变和二阶相变.