消弧方法及其新思路

对当前社会普遍流行的两种消弧方法进行分析,提出用可调电抗器来灭弧的新思路。     

Samples Selection for Artificial Neural Network Training in Preliminary Structural Design

An artificial neural network (ANN) is applied in the preliminary structural design of reticulated shells. Major efforts are made to enhance the generalization ability of networks through well-selected training samples. Number-theoretic methods (NTMs) are adopted to generate samples with low discrepancy, i.e.uniformly scattered in the domain, where discrepancy is a quantitative measurement of the uniformity. The discrepancy of the NTM-based sample set is 1/6-1/7 that of samples with equal spacing. In a case study,networks trained by NTM-based samples are compared with those trained by equal-spaced samples in generalizing performance. The results show that both the computational precision and stability of the former ANNs are more satisfactory than those of the latter. It is concluded that the flexibility of ANNs in generalizing can be effectively increased by use of uniformly distributed training samples rather than simply piling data.More reliable uniformity should be obtained, however, through NTMs instead of equal-spaced samples.     

NiAl基复合材料的研究进展

为了提高NiAl合金强度，改善NiAl合金塑性，在制备NiAl复合材料时，用不同的制备方法在NiAl合金中加入增强剂，如陶瓷或金属颗粒、晶须、短纤维和长纤维等制成复合材料，以不同的增强剂为基础总结了NiAl基复合材料研究在制备、结构、性能及机理等方面的最新进展。     

人工神经网络紫外分光光度法同时测定苯和甲苯

应用三层ANN_BP网络解析苯和甲苯的吸收光谱 ,不经分离 ,用紫外分光光度法同时测定苯和甲苯 .使用改进的BP算法 ,避免了神经网络学习过程中可能产生的麻痹现象 ,提出了目标向量的简单变换方法及便于网络参数选择的收敛评价函数 .实验验证了方法的有效性 ,同时表明 ,苯在 0 - 72 0mg/L和甲苯在 0 - 84 0mg/L范围内服从比尔定律     

FRP特种航空集装箱夹层板力学行为分析

研制FRP复合材料航空集装箱,以代替原有的钢质及铝合金集装箱,同时为进一步减轻集装箱质量,采用夹层结构设计集装箱各面板;运用复合材料经典层合理论,结合基尔霍夫(Kirchhoff G)薄板小挠度弯曲理论,对复合材料夹层板进行力学行为分析,得到夹层板的弯曲控制方程,并用莱维(Levy M)矩形板单三角级数解法进行数值求解,进而得到夹层板在给定条件下的弯曲挠度,从而提供了集装箱夹层板的设计依据.     

铂钼合金零件冲裁模的制作分析及改进

以具体零件为例分析了铂钼合金采用复合模加工时的缺点，提出了具体的改进方案，并论述了改进后的级进模结构、工作过程及其优点。     

应用测力—落刀装置对积屑瘤、鳞刺的研究

本文研制了一种测力—落刀装置,对积屑瘤和鳞剌的某些问题进行了试验研究。结果表明:在积屑瘤存在的区域内,由于刀具实际前角的增加,以及切屑与积屑瘤的接触长度小于自然接触长度,从而导致了切削力的降低。积屑瘤不是整体稳定不变的,也不是高频地整体脱落后再重新生长。而是基体比较稳定,头部产生高频的分裂、成长,其分裂的部分留在工件表面成为鳞剌,同时,引起了切削力的较大波动。切削力动态分量越大,相应的鳞剌高度越高。     

Simulation of the diffusion process in composite porous media by random walks

A new random-walk interpolation scheme was developed to simulate solute transport through composite porous media with different porosities as well as different diffusivities. The significant influences of the abrupt variations of porosity and diffusivity on solute transport were simulated by tracking random walkers through a linear interpolation domain across the heterogeneity interface. The displacements of the random walkers within the interpolation region were obtained explicitly by establishing the equivalence between the Fokker-Planck equation and the advection-dispersion equation. Applications indicate that the random-walk interpolation method can simulate one- and two-dimensional, 2nd-order diffusion processes in composite media without local mass conservation errors. In addition, both the theoretical derivations and the numerical simulations show that the drift and dispersion of particles depend on the type of Markov process selected to reflect the dynamics of random walkers. If the nonlinear Langevin equation is used, the gradient of porosity and the gradient of diffusivity strongly affect the drift displacement of particles. Therefore, random-walking particles driven by the gradient of porosity, the gradient of diffusivity, and the random diffusion, can imitate the transport of solute under only pure diffusion in composite porous media containing abrupt variations of porosity and diffusivity.