排序方式： 共有65条查询结果，搜索用时 221 毫秒
61.
以Fe-Cr-C合金粉末为原料,采用反应等离子熔覆技术,在45#钢表面制得以原位生成初生相(Cr,Fe)7C3为增强相的新型陶瓷复合材料涂层.利用SEM,XRD,EDS和显微硬度计等分析了涂层的显微组织和硬度,分别在室温干滑动磨损及高温滑动磨损条件下测试了涂层的耐磨性,并讨论了其磨损机理.结果表明,涂层组织包括(Cr,Fe)7C3增强相和γ-Fe固溶体与少量(Cr,Fe)7C3构成的共晶,该涂层在室温干滑动磨损和高温滑动磨损条件下均具有优异的耐磨性. 相似文献
62.
A wear resistant Cr7C3/γ-Fe ceramal composite coating was fabricated on substrate of the hardening and tempering C degree steel by PTA (plasma transferred arc) cladding with (wt%) Fe-25Cr-7C elemental powder blends. Microstructure of the coating was characterized by OM, SEM, XRD and EDS. Wear resistance of the coating was tested under dry sliding wear condition at room temperature. The results indicate that the PTA clad ceramal composite coating has a rapidly solidified fine microstructure consisting of Cr7C3 primary particles uniformly distributed in the γ-Fe matrix and is metallurgically bonded to the C degree steel substrate. The PTA clad Cr7C3/γ-Fe ceramal composite coating has high hardness and excellent wear resistance under dry sliding wear test conditions. The excellent wear resistance of the Cr7C3/γ-Fe ceramal composite coating is attributed to the coating's high hardness, strong covalent atomic bonding and refined microstructure. 相似文献
63.
异步轧制铜/铝双金属复合板变形行为的研究 总被引：2，自引：0，他引：2
采用异步轧制复合工艺制备了铜/铝双金属复合板,分析了轧制工艺参数对复合板变形行为的影响,结合轧制变形区金属受力状态探讨了复合过程中的金属变形及流动规律.结果表明:异步轧制变形区内界面摩擦剪切作用直接影响母材的受力状态,共同变形区内双金属间的搓轧作用对金属流动及结合效果影响最大.异步速比越大,硬质金属变形越大.总压下率增大时,组元金属压下率均呈正比关系增加,且软、硬两种金属的压下率差值越来越小. 相似文献
64.
西南某高酸性气田拟采用双金属复合管作为内腐蚀控制手段,为了评估复合管焊接接头的耐腐蚀性能,根据其结构特点,建立整管段试件有限元力学模型,并通过加载应力应变测试试验验证了有限元模型的准确性,确定出焊缝合理的应力槽形式和试验总压。采用自主研制的双金属复合管整管段的腐蚀评价装置和方法,开展了X52/825冶金复合管焊接接头在苛刻应力状态和腐蚀工况下的耐蚀性能评价,结果表明,X52/825冶金复合管焊接接头在模拟工况下,经720 h腐蚀实验后,均未出现破裂或刺漏,100%射线探伤检验结果显示X52/825冶金复合管焊接接头无开裂性裂纹,具有良好的耐蚀性能。研究结果为酸性气田复合管的性能评估和安全使用提供了技术借鉴。 相似文献
65.