Improved acetone sensing properties of flat sensors based on Co-SnO2 composite nanofibers

Co-SnO2 composite nanofibers were synthesized by an electrospinning method and characterized by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. Gas sensors were fabricated by spinning these nanofibers onto flat ceramic substrates, which had signal electrodes and heaters on their top and bottom surfaces, respectively. Compared with sensors loaded with pure SnO2 nanofibers, the Co-SnO2 nanofiber sensors exhibited improved acetone sensing properties with high selectivity and rapid response and recovery times. The response was 33 when the sensors were exposed to 100 μL/L acetone at 330°C, and the corresponding response with 100 μL/L of ethanol was only 6. The response and recovery times to acetone were about 5 and 8 s, respectively. These results indicate Co-SnO2 composite nanofibers are good candidates for fabrication of high performance acetone sensors for practical application.     

Evolution of the East Asian monsoon and its response to uplift of the Tibetan Plateau since 1.8 Ma recorded by major elements in sediments of the South China Sea

Evolution of the East Asian monsoon and its response to uplift of the Tibetan Plateau has been investigated in the study of global change. Core sediment samples drilled in the South China Sea during ODP Leg184 are the best materials for studying long-term variability of the East Asian monsoon. R-mode factor analysis of major elements in the fine grain-sized carbonate-free sediments (<4 μm) of the upper 185 mcd splice of ODP Site 1146 drilled during Leg184 in the South China Sea shows that Ti, TFe2O3, MgO, K2O, P, CaO, and Al2O3 are representative of a terrestrial factor. The variation in the terrestrial factor score is subject to chemical erosion in the source region and thus indicates the evolution of the East Asian summer monsoon. The terrestrial factor score has three stepwise decreases at ~1.3 Ma, ~0.9 Ma, and ~0.6 Ma, indicating the phased weakening of the East Asian summer monsoon is related to wholly stepwise, quick uplifts of the Tibetan Plateau since 1.8 Ma. The periodic fluctuation of the terrestrial factor score since ~0.6 Ma indicates that the glacial-interglacial cycles have been the main force driving the evolution of the East Asian monsoon. As in the case of Chinese loess, the long-term evolution of the East Asian monsoon recorded in sediments of the South China Sea reflects a coupled effect of the glacial-interglacial cycle and uplift of the Tibetan Plateau.     

化学沉积法制备用于印制电子的超细银粉

采用液相化学沉积法,以硝酸银为原料,水合肼为还原剂,聚乙烯吡咯烷酮(PVP)为分散剂,在室温下将硝酸银溶液滴加到还原性溶液中得到银颗粒的悬浮液,并经微孔滤膜过滤后制得用于印制电子业的超细银粉.用TEM、XRD与粒径分析等手段对产物的粒径与性状进行了表征,并进一步研究了PVP与硝酸银浓度对银粉粒度及产率的影响.这种制备工艺避免了传统机械研磨工艺中银粉纯度低、技术指标不一致的缺点,具有较好的应用前景.     

大麻药化学成分研究

 研究大麻药Dolichos falcata Klein的化学成分.大麻药用70%酒精进行提取,然后采用反复硅胶柱色谱法进行分离,根据理化性质和波谱分析数据解析化合物结构.从大麻药中分离得到7个化合物,分别为stig-mast-7,22-dien-3β-ol(Ⅰ),stigmast-7,24-dien-3β-ol-3-O-β-D-glucoside(Ⅱ),大麻药苷A(Ⅲ),十六碳酸(Ⅳ),二十五碳酸(Ⅴ),尿囊素(Ⅵ)及β-胡萝卜苷(Ⅶ).化合物Ⅰ～Ⅱ,Ⅳ～Ⅵ为首次从该属植物中分离得到.     

番茄CDT2同源基因RNA干涉载体的构建及遗传转化研究

真核生物CDT2是CUL4-DDB1 E3泛素复合体的组成部分,在细胞周期调控、DNA复制与损伤修复中起到重要作用.本研究克隆了番茄CDT2同源基因片段并构建了CDT2基因RNA干涉植物表达载体pBI121-CDT2-RNAi.通过根癌农杆菌介导转入番茄子叶,经组织培养成功获得转基因植株.半定量RT-PCR分析显示,转基因植株叶片内CDT2的表达量明显低于野生型植株.转基因植株叶片叶绿素含量比野生型明显升高.该研究结果揭示番茄CDT2基因的功能做出了新的尝试.     

絮凝过滤在石化废水深度处理中的应用研究

通过小试实验,比较分析无机、有机及复合絮凝剂对某石化企业污水处理厂出水的絮凝效果,通过处理效果和成本分析,筛选得到了聚合氯化铝-聚二甲基二烯丙基氯化铵复合絮凝剂(PAC-PDMDAAC).该絮凝剂在投加量为50 mg.L-1时,浊度最大去除率为72.4%;在实验投加量范围内,CODC r去除率均在40%以上;投加量为40 mg.L-1时,最大去除率达59.3%.在小试的基础上,将该絮凝剂应用于中试实验,分析监测不同构筑物对CODC r的去除效果等参数,确定了合理的投药量、排泥量、反冲洗时间、沉淀时间、处理水量等指标.     

对化工厂基建项目建设安全管理的认识与思考

工程项目安全管理是任何一个项目建设的管理重点,特别是近年来频频出现的工程安全事故,给我们每一位工程建设者和管理者提出了古老而又严肃的课题——如何加强对工程项目的安全管理。文章从分析化工厂基建项目的特点出发,指出其涵括建筑和化工两个行业的特殊之处,因而项目安全管理问题更加突出。进而指出在实践中可能存在的问题及改进的对策,为广大工程管理人员提供了有益借鉴。     

浅谈临界参数在化工计算中的应用

文章通过介绍化合物临界参数的计算方法,以及临界参数在化工计算中的3个重要应用:液体密度计算;气体热容计算;真实气体状态方程参数计算。可得出,临界参数是非常重要的化工物性数据,在化工计算中应引起重视。     

我国化学化工领域毕业生及学位授予情况的调研与分析

本文基于对我国化学化工领域2006-2010年间本科生、硕士研究生和博士研究生培养情况的调研数据,分析了不同学位层次毕业生数量变化趋势、毕业生在各学科门类及培养单位的分布情况,进而讨论了我国化学化工领域学生培养的结构特点及人才队伍趋势.     

Skin collagen fiber-based radar absorbing materials

By using skin collagen fiber (CF) as raw material,Schiff base structure containing CF (Sa-CF) was synthesized through CF-salicylaldehyde reaction.Then a novel radar absorbing material (Fe-Sa-CF) was prepared by chelating reaction between Sa-CF and Fe 3+.The coaxial transmission and reflection method was used to analyze the complex permittivity and complex magnetic permeability of these CF-based materials,and the radar cross section (RCS) method was used to investigate their radar absorbing properties in the frequency range of 1.0-18.0 GHz.Experimental results indicated that the conductivity of CF increased from initial 1.08×10-11 to 2.86×10-6 S/cm after being transferred into Fe-Sa-CF,and its dielectric loss tangent (tanδ) in the frequency range of 1.0-17.0 GHz also increased.These facts suggest that the Fe-Sa-CF is electric-loss type radar absorbing material.In the frequency range of 3.0-18.0 GHz,Sa-CF (1.0 mm in thickness) exhibited somewhat radar absorbing property with maximum radar reflection loss (RL) of-4.73 dB.As for Fe-Sa-CF,the absorbing bandwidth was broadened,and the absorbing intensity significantly increased in the frequency range of 1.0-18.0 GHz where a maximum radar RL of-9.23 dB was observed.In addition,the radar absorbing intensity of Fe-Sa-CF can be further improved by increasing membrane thickness.When the thickness reached to 2.0 mm,the RL values of Fe-Sa-CF were-15.0-18.0 dB in the frequency range of 7.0-18.0 GHz.Consequently,a kind of novel radar absorbing material can be prepared by chemical modification of collagen fiber,which is characterized by thin thickness,low density,broad absorption bandwidth and high absorption intensity.