IMPLICIT—EXPLICIT MULTISTEP FINITE ELEMENT METHODS FOR THE SEMICONDUCTOR DEVICE PROBLEM

The transient behavior of a semiconductor device consists of a Poisson equation for the electric potential and of two nonlinear parabolic equations for the electron density and hole density.The electric potential equation is discretized by the finite element method.The electron and hole density equations are treated by implicit-explicit multistep finite element methods.The optimal L^2-norm error estimates are derived.     

磁感应成像中三维涡流前期模型仿真

磁感应成像(MIT)中正问题的仿真是影响MIT技术发展的关键性问题之一,而导体内部三维涡流问题又制约着MIT中的正问题的研究。基于正问题的数学模型,提出一种MIT三维测量模型,利用有限元方法进行求解,仿真获得导体中不同面的三维涡流的磁通密度分布并进行对比,得出受激励线圈影响导体内部三维涡流磁通密度的变化规律,为研究MIT中的正问题及图像重建提供重要依据。     

利用事元蕴含系统寻找开拓市场的策略

利用可拓学中事元及其蕴含性,给出了事元蕴含系统的概念,并将其应用到市场营销中,以生成开拓市场的策略,为企业提供了一种开拓市场的形式化方法     

自然地理界线划分的物元模型

运用可拓学和主成分分析方法,对福建省境内中、南亚热带之间界线最佳位置的确定建立了综合评判物元模型,模型输出的结果获得满意的自然地理意义解释．     

计算E型方杯压敏电阻最佳位置的一种有效方法

采用有限元法计算了Ｅ型方杯的挠度及应力分布,并从应力差计算出了压敏电阻设置的最佳位置．     

曲面薄壳有限元离散误差分析和修正方法研究

基于曲面薄壳几何/物理方程和有限元离散原理推导,揭示了壳单元离散方法特点、刚度矩阵误差产生机理和范数表示方法。以航空涡轮发动机测压探针为例,深入研究了利用协调平板壳单元、非协调平板壳单元、一次和二次实体退化壳单元等不同类型单元离散曲面薄壳时,应力计算误差影响因素及变化规律,综述了单元的适用条件。基于Boltzmann模型提出了应力计算结果修正通式,通过FORTRAN语言编程修正应力仿真结果和ANSYS二次开发语言APDL命令实现应力修正结果的读取和后处理,应力修正结果与理论解相对误差小于5%,满足曲面薄壳设计和稳定性分析应用要求。

Abstract：

Based on the geometric physical equations and deduction of discrete process of finite element for curved thin-walled structure,characteristics of shell elements for discretion and discrete error for element stiffness matrix were analyzed theoretically,and the norm expression of discrete error for element stiffness matrix was put forward.Then,as an illustration,a probe for detecting the pressure inside turboprops was meshed by curved thin-walled shell element,compatible flat shell element,incompatible flat shell element and 3D degenerated shell element,respectively,and the stress of the probe was numerically calculated by FEM.On the basis of solved results,the stress error was analyzed thoroughly,the influence factors on the error and the applying situations for different elements were determined.Finally,the general form of correctional function was put forward according to the Boltzmann model.The program developed with FORTRAN was used to correct the numerical results and the APDL commands inside ANSYS software were utilized to read and plot the correctional stress results.Through the correction,the discrete error can be reduced within 5% that satisfies the requirement of application for structural design and stability analysis.     

基于子结构法的某多管火箭炮频率特性分析

根据虚功原理,推导了子结构方法的动力学模型。采用实体单元建立了某多管火箭炮的子结构模型。计算了某多管火箭炮在不同俯仰角和装弹数量情况下的固有振动频率,得到了低阶固有频率与俯仰角的关系及低阶固有频率与火箭弹数量的关系。结果表明采用该方法计算频率,能减小计算模型,缩短计算时间。     

SOME DISCUSSION ON THE CONDITIONS OF COMPLETE CONVERGENCE FOR SUMS OF B-VALUED RANDOM ELEMENTSS

1. Introduction and Main ResultsSince the definition on complete convergence of real random variables was introduced by Hsuand Robbins[1], there have been extensive literature on the complete convergence of i.i.d. realvalued random variables, see Baum and Katz ([2]), Bat and Su ([3]). In 1989, Yul4] extendedsome results in Bat and Su ([3]) to real valued independent but not necessarily identicallydistributed case. The main purpose of this paper is to extend the results of Yu[4] to B-value…     

THE DOMAIN DECOMPOSITION TECHNIQUES FOR THE FINITE ELEMENT PROBABILITY COMPUTATIONAL METHODS

1. IntroductionWe have discussed probability computational methods of finite element methods in [1,2,3,4].Probability computational methods have many advalltages. The advantages are more obviousin three dimensions for finite element problems. In probability model, the time that the particlemoves from one place to the boundary of the domain and is absorbed by the boundary (whichis called the time of running up to the boundary for short) is only dependent on the averagedistance between the start…     

FINITE ELEMENT METHOD AND ANALYSIS FOR CHEMICAL-FLOODING SIMULATION

1.IntroductionThisarticlediscussestheenhanced0ilrecoverynumericalsimulationofthechemicalflood-ing(suchassurfactats,alcohol,polymers)c0mposed0f3-dimensional,multicomponent,muLtiphaseandincompressiblemixedfluids.Aftertheoilfieldiswaterfi0oded,thereisstillalargeamountofcrudeoilleftintheoildeposit.Thisamountofoil,boundedbycapillarypressure,cannotflow;or)asaresultofthedisadvantageousrateofflowbetweenthedisplacinganddisplacedphases,thevolumethattheinjectionfiowaffectsistoosmalltodrivethecrudeoil.By…