炼钢─连铸─热轧直接热装一体化计划

从计划角度重点分析了钢铁生产中炼钢、连铸、热轧三者之间联接的较高模式－直接热装轧制计划系统的实现方式，并给出了较为具体的方案。     

Experimental Study on the Milling of a Ti Beta 21S

Ti Beta 21S (Ti-15Mo-2.7Nb-3Al-0.2Si) was devel op ed by TIMET in 1989. It is a metastable beta titanium alloy that offers subs tantial weight reductions over other engineering materials. Compared with common beta Ti alloys, it offers the high specific strength, good cold formability, im proved oxidation resistance, elevated temperature strength, creep resistance, an d thermal stability. Besides the common characters of titanium alloy, such as po or heat diffusivity, low elastic modulus, Ti Beta 21S has ...     

High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

A New Shaping Model for Green Ceramic Balls

The shaping quality of green ceramic balls is directly related to the efficiency and cost of later machining for the ceramic balls. Until now the shaping for green ceramic balls is still conducted by handwork. In this paper, a new shaping model for green ceramic balls was designed. In the new model, two grinding wheels with the same generator line as circular arc are mounted on symmetry, and their axes are parallel. The green ball can be put in the enveloping space formed by the two grinding wheels. The rad...     

散热器型芯烘烤窑净化系统中分离器的设计研究

为解决铸铁散热器生产环境污染、产品成品率及产品质量低下等问题,笔者研制了XWJ-1型消烟雾化净化系统。该系统是根据乡镇企业实际状况,在原烘烤窑内采用烟道重新配置、油烟预处理、水雾化冷却、分离污染物、净化排放五步骤设计。通过6年多的试验运行和改进,结果证明,使用XWJ-1型油烟雾化净化系统,可以把高温、高浓度烟气中的焦油和有害气体减少90%,并分离净化到符合国家环保排放标准要求(GB9078-1996,GB16297-1996),较好地解决了热能利用、污染物回收利用等问题,提高了制芯及散热器的成品率及其质量,使企业经济效益显著提高。     

新型薄壁柴油机缸体铸件的研制与应用

采用低合金化、合锑多元复合孕育剂、扫描电镜、200h台架试验、以及l000h耐久试验等方法对新型薄壁柴油机缸体铸件进行了研制与应用试验．试验结果表明：碳当量控制在3．9％--4．1％时(与菲亚特缸体的碳当量大体相当)，采用低合金化及合锑复合孕育剂，可稳定获得高强度铸件，抗拉强度σb＞270MPa，硬度HB＞210，白口倾向小，硬度差小于35HB，其性能均达到菲亚特缸体的性能要求．对无缸套缸体的缸壁表面进行激光处理，比传统缸套的耐磨性提高一倍以上．由于采用了无缸套缸体生产技术，简化了柴油机的结构，降低了柴油机的生产成本，提高了柴油机使用性能和技术含量．     

双层缠绕时偏角对钢绳磨损的影响

本文通过对实验及现场测量结果的综合分析,认为双层缠绕时的偏角变化对钢绳磨损没有显著的影响。     

Finesse 全瓷冠适合性的体外实验研究

目的 :测量Finesse全瓷冠的边缘浮出量及粘固剂的厚度 ,并与金属全冠及金瓷全冠相比较 ,为Finesse全瓷冠的临床应用提供适合性方面的理论依据。方法 :用片切法测量 3组全冠粘固前、后边缘浮出量及粘固剂的厚度。结果 :Finesse全瓷冠粘固前、后的边缘浮出量分别为 (37 6 1± 9 13) μm、(6 5 85± 15 11) μm ,粘固剂厚度为 (40 84± 9 73) μm ,与金属全冠及金瓷全冠相比较 ,均无显著性差异 ;3组全冠粘固前和粘固后的边缘浮出量有显著性差异。结论 :Finesse全瓷冠适合性良好 ,完全可为临床应用 ;粘接对全冠修复体的边缘浮出量有影响。     

应用全谱直读光谱仪测定原油中铁和钙元素的含量

提出了利用电感耦合等离子发射光谱ICP -AES法测定原油中铁、钙元素含量的方法 ,考察了雾化压力、RF功率等对被测元素分析线强度的影响 ,确定了仪器的最佳使用条件。试验表明 ,该方法简便、快速、精密度和准确度均令人满意 ,能满足实际应用的要求     

电动机受潮的几种处理方法

介绍了实际生产中电机干燥的常用方法及其适用范围,并对现场操作时的注意事项做了简要说明。