针形锂电池CR425的研制

采用Li—MnO2电池材料和工艺制造CR425锂电池．重点对正极活性物质的加工制备及电池组装工艺进行了试验和改进．通过XRD试验测试了热处理前后电解二氧化锰(EMD)的结构，对制备的电池在不同温度下进行恒电流和恒电阻放电，并对贮存1周、3个月和6个月电池的开路电压、短路电流、内阻及放电容量进行了测试．结果表明，电池性能完全满足CR425锂电池的技术要求，可作为夜间钓鱼时的发光浮标或商务通用笔夜间使用时的照明电源．     

Carbon Nanotubes:from Nanoscale Building Blocks to Macrostructures

1 Results Carbon nanotubes (CNTs) have fascinating properties.In order to use these novel one-dimensional structures for applications such as in nano-electronic,nano-mechanical and electrochemical energy storage device and as structural elements in various composites,the structure of nanotubes needs to be tailored and various architectures and macroscale assembles have to be configured using nanotube building blocks.Nanotube macrostructures are macroscopically organized groups of CNTs,which are expecte...     

Elaboration and Properties of Nanocomposite Structures Based on Crown Modified Platinum Nanoparticles

1 Results This paper presents the development of platinum nanocomposites structures based on organically modified c.a.2 nm core platinum nanoparticles.The chemical modification of the 4-mercaptoaniline functionalized particles by various in coming molecules is evidenced and precisely quantified.The particles can be dissolved like molecules in various solvents depending on the features of the new crown and X-rays shows that the interparticle distance is affected by the crown modification.These platinum n...     

某库岸滑坡稳定分析及治理措施研究

从地质条件出发,详细分析了滑坡的成因,以大型的岩土工程数值分析软件(ADINA)为研究手段,建立有限元计算模型,用强度折减的方法分析了滑坡体在初始工况、蓄水工况、暴雨工况、水位骤降工况和地震工况下的稳定情况,根据滑坡的失稳情况,在综合考虑的基础上,提出了削坡减载和地表排水相结合的治理措施,计算结果表明,治理措施是可行的,研究结果对设计和施工具有较大的参考价值.     

"溶液吸附法测定活性炭比表面积"实验的改进

研究了吸附荆的颗粒度、吸附时间、吸附温度、原始溶液浓度对吸附平衡的影响，确定了新的实验条件：粒状活性炭破碎至60．100目；70℃恒温振荡0．5h后，再于室温振荡吸附1．5h；原始溶液的溶质质量分数为2％左右．改进后，提高了实验精密度，缩短了实验时间．     

烟气分析在转炉冶炼过程中的应用研究

介绍转炉烟气分析控制系统,研究转炉烟气和炉气在冶炼过程中的变化规律,并开发烟气定碳模型。结论表明,在转炉冶炼过程中利用烟气成分的变化规律,可进行转炉炉况判断、终点判断和了解炉内反应过程。开发的烟气定碳模型对于含碳量低于0.12%的炉次,其控制精度为±0.02%,命中率为90%。     

Electrocatalytic Oxidation of H_2 O_ 2 at a Carbon Paste Electrode Modified with a Nickel (Ⅱ)-5,11,17,23-Tetra-Tert-Butyl-25,27-Bis(Diethylcarbamoylmethoxy)Calix[4] Arene Complex and Its Application

0　IntroductionThegreatimportanceofnickelelectrochemistryinalkalinemedium ,especiallyforpotentialapplication ,hasattractedmuchattetionofresearcherseithertostudythebehaviorofnickel basedelectrodeitselforitsactivitytowardsothermolecules.Manyreportsshowedthatthenickelbasedelectrodeshaveelectro catalyticactivityforreactionsofappliedinterest,suchaselectro chemicaldeterminationofantioxidantsinfood[1 ] ,detectionofni tricoxide (NO )insolution[2 ] ,electrocatalyticoxidationofmethanol[1 ] ,alcohol[3] ,…     

PAN 活性炭纤维表面结构

通过元素分析(EA)、X射线衍射(XRD)、X光电子能谱(XPS)、差热分析(DTA)等方法，证明不同比表面积的聚丙烯腈(PAN)活性炭纤维(ACF)具有不同的表面微结构。结果表明，高比表面积的ACF、与低比表面积的ACF相比，类石墨微晶尺寸小，边缘活泼C原子数目多，本体C原子质量分数大，N、H、O等杂原子质量分数小，羧基、酰胺基团的数量少，醚基数量多。     

催化裂解法制备螺旋状碳纳米管的实验研究

在硅片上用直流溅射镀铁的方法制备催化剂 ,通过乙炔在 70 0°C下催化裂解制备碳纳米管 .对热解产物进行了扫描电镜观察和 X射线衍射测试 .本文通过对有氢气预处理和没有氢气预处理两种情况下催化裂解法制备的碳纳米管的形貌、管径大小等性质的研究 ,来初步揭示螺旋状碳纳米管的生长机理 .