Improvement in hydrogen storage performance of Mg by mechanical grinding with molten salt etching Ti3C2Clx

Mg-based materials are currently a hot research topic as hydrogen storage materials due to their considerable theoretical hydrogen storage capacity. However, the kinetic performance of hydrogen absorption and desorption of Mg is too slow and requires high temperature, which seriously hinders the application of this material. MXene is a new type of two-dimensional material with significant role in improving thermodynamics and kinetics. In this experiment, a two-dimensional layered MXene containing Cl functional group was prepared by molten salt etching using the Ti-containing MAX phase as the raw material. Then different ratios of Ti₃C₂Cl_x were uniformly dispersed onto the surface of Mg by high energy ball milling. The samples were characterized by hydrogen absorption and desorption kinetics, SEM, XRD, XPS, and DSC to investigate the effect of Ti₃C₂Cl_x on the hydrogen absorption and desorption performance of Mg. The onset hydrogen absorption temperature can be reduced to room temperature and the hydrogen release temperature is reduced by 200 ​°C by doping Ti₃C₂Cl_x. And there is also 5.4 ​wt% hydrogen storage in the isothermal hydrogen absorption test at 400 ​°C. The results of DSC demonstrate that the E_a of Mg+15 ​wt% Ti₃C₂Cl_x was reduced by 12.6% compared to pristine Mg. The ΔH is almost invariable. The results of XPS show that the presence of multivalent Ti promotes electron transfer and thus improves the conversion between Mg²⁺/Mg and H⁻/H. This study provides a guideline for further improving the hydrogen absorption and desorption performance of Mg-based hydrogen storage materials.     

Sea water intrusion and salt water intrusion in the coastal area of Laizhou Bay

The characteristics, pattern, hydrodynamic and hydrochemical features, and the movement pattern of the salt waterfresh water interface of the sea water intrusion and the salt water intrusion, which occur in the coastal area of Laizhou Bay in Shandong Province, are analysed. The characteristics of the two kinds of intrusion are compared as well. A three-dimensional sea water intrusion model to describe the sea water intrusion with a transitional zone 1.5–6.0 km wide in the phreatic aquifer and a solute transport model describing the behavior of cations exchange in the process of sea water intrusion are established.     

盐胁迫下Na^＋,K^＋,Cl^—对碱蓬和玉米离子的吸收效应

用ＮａＣｌ、ＫＣｌ、ＮａＮＯ３和ＫＮＯ３处理碱蓬（Ｓｕａｅｄａｓａｌｓａ）和玉米（Ｚｅａｍａｙｓ）幼苗,发现ＮａＣｌ胁迫引起Ｋ＋、Ｃａ２＋、Ｍｇ２＋、Ｆｅ２＋、Ｚｎ２＋、ＮＯ－３等必需元素的含量降低．认为ＫＣｌ和ＫＮＯ３处理引起碱蓬幼苗幼叶黄化的主要原因是Ｎａ＋的缺乏;ＫＣｌ处理引起玉米和碱蓬幼苗的干枯死亡主要是由于植物体内高浓度Ｃｌ－引起的;Ｎａ＋是引起盐生植物碱蓬叶片肉质化的重要因子;Ｃｌ－是刺激碱蓬生长的重要因子     

盐胁迫下灰绿藜叶片光合特性与叶绿体离子调节的研究

ＮａＣｌ处理后,灰绿藜整个叶片内Ｎ＾＋ａ和Ｃｌ＆－积累,但叶绿体内仅少量增加。叶绿体与叶片的Ｋ＾＋浓度都降低。     

Schiff碱型双(苯并-15-冠-5)对碱金属苦味酸盐的萃取性能研究

用五种Ｓｃｈｉｆ碱型双（苯并＿１５＿冠＿５）为离子载体,在水＿１,２＿二氯乙烷体系中研究了其对碱金属苦味酸盐的萃取性能,测定了分配比Ｄ和萃取平衡常数Ｋｅ．结果表明,这些双冠醚与苦味酸钠以１∶１（冠醚单元∶金属离子）形式络合,而与苦味酸钾和苦味酸铷则以２∶１形式络合．     

小麦耐盐细胞系脯氨酸SOD酶核酸和蛋白质合成动态分析

对已筛选出的小麦耐盐细胞系的耐盐稳定性进行有关生理、生化分析。结果表明：耐盐细胞系脯氨酸含量不仅稳定,而且高于对照;ＳＯＤ活性在耐盐系增加,耐盐系对一定的盐浓度损伤ＤＮＡ修复能力大于对照系,耐盐系ＲＮＡ和蛋白质合成量分别是对照的５．４和４．５倍,并对小麦耐盐性的有关问题进行了讨论。     

电荷转移多金属氧酸盐的研究进展

概述了多金属氧酸盐与ＴＴＦ类π电子有机给体形成的电荷转移盐研究的简短历史和新近进展,着重评述了它们的合成、结构、性质以及研究方法．     

激光热致相变核-壳微胶囊的合成与性能

以甲基丙烯酸甲酯作为主要的核单体，甲基丙烯酸缩水甘油酯作为壳单体，叔胺盐作为壳的改性剂，合成了平均粒径为55nm具有激光热致相变性能的核壳微胶囊。用红外光谱对其结构进行了表征；用透射电镜观察了微胶囊形貌；用示差量热分析法、热重分析法测定了热性能、接触角仪测定了相变前后的亲水性，探讨了对相变效果的影响因素。核聚合物的玻璃化转变温度为56.2℃，壳聚合物的玻璃化转变温度为85.3℃；该微胶囊感激光后发生相变，接触角由初始的20°变为93°。     

一种高分子电阻型湿度传感器的制备及研究

以苯乙烯-马来酸酐共聚物钠盐(Na-SMA)为湿敏材料,采用浸涂的方法,在小型叉指金电极上成膜,制备了高分子电阻型湿度传感器.研究了浸涂液组成对传感器响应特性的影响.研究表明,随着浸涂液中Na-SMA浓度的提高,元件的电阻、湿滞降低;而随着浸涂液中聚乙烯醇(PVA)浓度的提高,元件的电阻降低,湿滞增加.     

基于粗糙集理论的图像中值滤波

介绍了粗糙集理论的概念，利用粗糙集理论进行了图像中像素值的分类，提出了一种基于粗糙集理论的图像中值滤波算法，进行了仿真试验，并和传统的图像中值滤波结果进行了视觉上的比较和峰值信噪比指标的比较。实验结果和峰值信噪比指标表明，该算法能有效地滤除图像中的随机脉冲噪声和椒盐噪声，还能使图像保持很好的清晰度。