南京市"数字房产"GIS共享平台建设框架

随着信息化的深入，大家都感受到将信息系统应用提升到平台层次。是避免资源浪费．实现数据共享最有效的方法和手段，本文结合南京市“数字房产”的建设，提出了以“层服务模型思想”来构建房产GIS共享平台。详细分析了平台建设的理论基础、总体结构以及数据的组织管理方式，对不同行业间的数据信息共享作出了尝试，     

B-样条曲面的G1连续性

得到了关于两个双三次内部重结点B-样条曲面片G1连续的充分必要条件和在公共边界线上控制向量的本征条件,这些条件直接由两个B-样条曲面的控制向量表示.利用本文所给的条件,得到了具有局部性质且是真正G1光滑的曲面模型.     

边界曲线摄动的双解析函数的Riemann边值问题

讨论了双解析函数Riemann边值问题的解在区域边界L发生光滑摄动时的稳定性问题。     

气泡塔熔融结晶器中传递与晶层生长

分析了气泡塔结晶器熔融结晶过程中自熔体向晶层界面的热、质传递特征，建立了描述该过程晶层生长的稳态模型。在自熔体向晶层界面对流传热膜系数的计算中，将弹单元分为弹状气泡周围液膜区、尾迹区及液塞段3段，各段的平均对流传热膜系数不同。分别在表观气速0.04和0．08m/s下，用模型对己内酰胺晶层生长进行了计算，计算结果与实验结果基本吻合。     

Instability of the shear layer in the near wake of a circular cylinder

The instability of the shear layer separated from a circular cylinder is studied with the Reynolds number (Re) of 3000～104 by numerically solving the two-dimensional Navier-Stokes equations. In the wake of the cylinder, primary vortex shedding with natural frequency fs occurs, and the instability of the shear layer with frequency ft develops, which leads to mixing layer eddies and interacts with the primary shedding vortices. However, there remains some uncertainties regarding to the variation of the shear layer characteristic frequency with the Reynolds number. Based on the previous experimental work, several relationships of ft/fs with Re has been proposed including ft/fs～Re0.5 by Bloor, ft/fs～Re0.87 by Wei and Smith and ft/fs～Re0.67 by Prasad and Williamson. The objective of this study is to predict reasonably the relation of the shear layer instability frequency with the Reynolds number based on the present accurate calculation with the high-order schemes and high-resolution spectrum analysis. According to our calculated results, a variation for the normalized shear-layer frequency of the form ft/fs～Re0.69 is predicted numerically, which is in good agreement with a recent experimental measurement of Re0.67 and physical prediction of Re0.7.     

Compact difference approximation with consistent boundary condition

For simulating multi-scale complex flow fields it should be noted that all the physical quantities we are interested in must be simulated well. With limitation of the computer resources it is preferred to use high order accurate difference schemes. Because of their high accuracy and small stencil of grid points computational fluid dynamics (CFD) workers pay more attention to compact schemes recently. For simulating the complex flow fields the treatment of boundary conditions at the far field boundary points and near far field boundary points is very important. According to authors' experience and published results some aspects of boundary condition treatment for far field boundary are presented, and the emphasis is on treatment of boundary conditions for the upwind compact schemes. The consistent treatment of boundary conditions at the near boundary points is also discussed. At the end of the paper are given some numerical examples. The computed results with presented method are satisfactory.     

碳钢粉末渗铝试验研究

对 2 0碳钢进行了粉末包埋渗铝试验 ,优化了渗剂配方及渗铝工艺。采用X射线衍射仪分析了渗铝层的相成分 ,并对渗铝层的微观组织和渗铝钢的力学性能进行了测试。结果表明 ,使用 3号渗剂的 2 0碳钢的表面渗铝效果最好。 2 0碳钢渗铝层内未出现高铝脆性相 (FeAl3 、Fe2 Al5等 ) ,这有利于改善渗铝钢的力学性能和焊接性能。 2 0碳钢经渗铝处理后 ,其机械性能略有降低 ,高温持久性能明显降低 ,而抗高温氧化性能大大提高。     

边界单元法三维应力分析计算程序

以三维弹性力学问题的基本解 (Kelvin解 )为基础开发了边界单元法三维弹性应力分析计算程序 ,并对其进行了验证。结果表明 ,该程序可用来求解三维弹性应力问题 ,尤其适用于三维应力集中问题。程序中采用动态分配内存 ,自动选点积分 ,并利用分块解法求解方程组 ,有效地节省了计算机资源 ,扩大了求解问题的规模。     

Shakedown Analysis of 3-D Structures Using the Boundary Element Method Based on the Static Theorem

The static shakedown theorem was reformulated for the boundary element method (BEM) rather than the finite element method with Melan‘s theorem, then used to develop a numerical solution procedure for shakedown analysis. The self-equilibrium stress field was constructed by a linear combination of several basis self-equilibrium stress fields with undetermined parameters. These basis self-equilibrium stress fields were expressed as elastic responses of the body to imposed permanent strains obtained using a 3-D BEM elastic-plastic incremental analysis. The lower bound for the shakedown load was obtained from a series of nonlinear mathematical programming problems solved using the Complex method. Numerical examples verified the precision of the present method.     

Struts和JDO的Web应用

网络技术的发展促使应用系统结构由C／S结构到B／S结构的转变，因而要构建一个具有高稳定性、可扩展性、可维护性的应用系统，B／S结构的设计就极为重要．在简要介绍MVC软件设计模式和存储层设计的基础上，提出了Struts和JDO两种技术相结合的B／S开发结构，而这种B／S结构可以用于构建强壮的中小型Web应用系统．