一类卡诺制冷机的最小附加功率

讨论含有热阻和热漏损失的不可逆卡诺制冷机的损失．导出制冷机在给定制冷率下的最小附加功率,并作些讨论,所得结论为卡诺制冷机的优化设计提供理论依据．     

PVA/PAN 渗透汽化复合膜的制备与分离性能研究(Ⅰ)——膜制备及处理条件的选择

制备出了ＰＶＡ／ＰＡＮ渗透汽化复合膜,活性分离层ＰＶＡ的厚度为１～１０μｍ,并将其用于乙醇－水混合物的分离．结果表明,热处理条件能显著影响ＰＶＡ／ＰＡＮ复合膜的渗透通量、渗透选择性和分离指数．通过实验确定了最佳的热处理温度和时间．     

换热器烟气侧传热特性的研究

通过计算和实验,对高温换热器的烟气侧传热特性进行了分析,得出换热器中换热管合理的纵横向间距,证明了用金属辐射网是强化高温烟气传热的有效方法,并用实验数据讨论了烟气流速及温度等对换热器综合传热系数的影响。     

不同传热规律下的热漏损失对制冷机R—ε特性的影响

本文基于存在热阻和热漏损失的定态流不可逆卡诺制冷机模型,导出了热阻损失服从牛顿定律和热漏损失服从一般传热规律时制冷系数与制冷率间的优化关系,研究了不同传热规律下的热漏损失对制冷机优化性能影响的特点。     

液体运动微分方程在叶片泵理论中的应用

本文从水泵有限叶片的真实性出发,假定叶槽宽度不大,讨论的介质为不可压缩的理想液体,其相对运动近似为稳定流(w/y)0的条件下,采用“液体运动微分方程”导证基本能量公式,它与用传统的动量矩原理导证方法相比,能较完满的解释叶槽内产生反旋现象的原因,同时,可以与叶片泵有关基本理论(如相对运动方程、汽蚀运动方程等)紧密结合。     

水平多孔窗内蒸发现象与制冷效应的二维数值模拟

从连续介质力学的观点出发,建立了描述非饱和多孔介质内部热质传递现象的二维稳态模型.并用此模型对水平多孔窗的传热传质过程进行了数值模拟,得到了不同运行工况下的床内各量的场分布及其蒸发制冷量分布,从而揭示了环境参数与多孔窗内部热质传递及其换热性能之间的内在联系.     

Effects of atmospheric pollution on human health

Most air pollutants do not lead to specific diseases. Depending on the pollutant, the concentration and the duration of exposure, some organs are more affected than others. The most frequent disorders are those caused by irritant gases and particulates on the mucous membranes and respiratory organs. The consequences are eye, nose and throat inflammations, diminished lung function, increased susceptability to respiratory infection and a higher incidence of chronic bronchitis. These disorders and diseases are, of course, influenced by other factors as well, such as immune deficiency, allergies, occupational exposure to pollutants, and particularly smoking. The effects of air pollutants are, therefore, multifactorially conditioned and nonspecific disorders are placed in the foreground. Evidence for an association of air pollution with adverse effects on human health is drawn from three sources: animal experiments, experimental human exposures, and epidemiologic studies of exposed human populations. The burden of atmospheric pollution must be reduced to protect human health by an adequate safety margin. In particular, the increased sensitivity of sick and aged people as well as children should be taken into account. In defining the maximum emmission levels, preventive aspects should have priority so as to keep the risk of damage to health and the harmful influences on the environment to a minimum.This article Effects of atmospheric pollution on human health by H. U. Wanner is a revised version of the same article that was first published in the Proceedings of the 1990 European Aerosol Conference; special issue of the J. Aerosol Sci., Vol. 21, Suppl. 1 (1990) 389–396.Reprinted with kind permission from Pergamon Press Ltd, Headington Hill Hall, Oxford OX3 0BW, Great Britain.     

Pathways of proton transfer in the light-driven pump bacteriorhodopsin

The mechanism of proton transport in the light-driven pump bacteriorhodopsin is beginning to be understood. Light causes the all-trans to 13-cis isomerization of the retinal chromophore. This sets off a sequential and directed series of transient decreases in the pK_a's of a) the retinal Schiff base, b) an extracellular proton release complex which includes asp-85, and c) a cytoplasmic proton uptake complex which includes asp-96. The timing of these pK changes during the photoreaction cycle causes sequential proton transfers which result in the net movement of a proton across the protein, from the cytoplasmic to the extracellular surface.     

Al-Ce-Ni共晶合金块体金属的净化与组织细化

以Al-Ce-Ni共晶合金作为研究对象,采用熔体净化剂与循环过热相结合的方法净化合金,循环过热通过高温效应熔解、钝化异质形核质点,熔体净化剂通过化学溶解、物理化学吸附及其组元与异质形核衬底的化学反应去除异质形核质点与衬底,并减缓金属熔体的氧化.实验中使用不同的净化剂进行研究,发现使用80?O3 20%Na2O(mol%)净化,在850℃×5 min循环过热,熔体发生深过冷的效果最好.     

微量元素及热处理对ZL107组织和性能的影响

ZL107合金具有良好的铸造性能和较高的力学性能,应用非常广泛,但目前还不能满足现代工程结构中大型、复杂、高强度重要铸件的要求.实验在原有成分的基础上,通过添加微量合金元素、混合稀土变质和选择合理的热处理工艺来进一步提高ZL107的综合力学性能.实验结果表明,改进后的合金经过金属型浇注、T5处理后的力学性能:σb为324.2 MPa,δ5为4.1%,HBS为102,比原ZL107合金分别提高了19.7%、46.4%和8.0%.改进后的ZL107合金不但具有较高的强度和硬度,而且具有良好的塑性,有望成为大型、复杂、高强度结构铸铝件的优选合金之一.