Shakedown Analysis of 3-D Structures Using the Boundary Element Method Based on the Static Theorem

The static shakedown theorem was reformulated for the boundary element method (BEM) rather than the finite element method with Melan‘s theorem, then used to develop a numerical solution procedure for shakedown analysis. The self-equilibrium stress field was constructed by a linear combination of several basis self-equilibrium stress fields with undetermined parameters. These basis self-equilibrium stress fields were expressed as elastic responses of the body to imposed permanent strains obtained using a 3-D BEM elastic-plastic incremental analysis. The lower bound for the shakedown load was obtained from a series of nonlinear mathematical programming problems solved using the Complex method. Numerical examples verified the precision of the present method.     

舟桥丙丁接头接触分析的计算机模拟

深入考察接触行为的特点，并以舟桥纵向连接件丙丁接头为例，建立了两种接触计算模型。采用大型通用有限元程序进行分析，模拟丙丁接头受力时的应力应变。与经验合成计算结果和常规有限元分析的结果进行对比，证明接触分析方法对连接件塑性变形、疲劳分析和优化设计有重要的指导意义。     

系统数字频响分析中若干条件的辨析及应用

讨论系统数字频响分析中的线性、时不变、因果、稳定、奇偶虚实分解及其对应等推导求解的条件,明确了如何正确应用这些条件.     

Stress corrosion cracking and its anisotropy of a PZT ferroelectric ceramics

It is known that some types of ceramics, like Al2O3 and ZrO2, undergo stress corrosion cracking (SCC) or static fatigue fracture under static loading, ever in a rela-tively mild environment, such as moist atmosphere or water at room temperature, which leads to a time-dependent fracture[1—4]. For a transmission electron microscopy specimen of YBa2Cu3O7-x ceramics superconductor, SCC induced by residual stress can occur in an atmosphere with low moisture content[5]. For a lead zirconate ti…     

Abnormal piezoresponse behavior of Pb（Mg1／3Nb2／3）O3-30% PbTiO3 single crystal studied by high vacuum scanning force microscopy

The piezoresponse behavior dependence of the Pb(Mg1/3Nb2/3)O3-30%PbTi03 single crystal on the vacuum degree has been investigated by scanning force microscopy in the piezoresponse mode under high vacuum. Unusual piezoresponse behavior related to the screening charges compensation mechanism is observed on the (111) crystal face. The significant piezoresponse degradation behavior with low piezoresponse signal under high vacuum is attributed to the instability of the polarization state due to the insufficient compensation of the intrinsic screening charges for the polarization charges in PMN-30%PT single crystal. In contrast, the remarkable domain contrast of the sample at ambient pressure is owing to the dominant surface screening charges deriving from surface adsorption, which plays an important role in determining the stability of the domain behavior and in achieving the optimal properties.     

钢管混凝土拱桥的地震响应分析方法

目前常用于钢管混凝土拱桥的地震响应分析方法有换算截面法和双单元法 .提出一种基于钢管混凝土统一理论 ,将钢管混凝土作为一种材料 ,根据其构件力学性能指标进行地震响应分析的方法 ,并运用这 3种方法对一钢管混凝土拱桥实例进行了分析 .比较分析其计算结果 ,认为基于统一理论的方法是一种分析方便易行的钢管混凝土拱桥地震响应分析方法     

预应力钢筋混凝土结构三维应力场的实验

采用三维光弹性应力二次冻结法模拟分析预应力钢筋混凝土结构中的应力 .为了提高实验速度、增强实验结果的可靠性 ,冻结实验时将预应力和负载应力冻结在同一试件中 .就所涉及相似模拟的若干关键问题 ,结合工程实例进行探讨 ,提供了若干有意义的成果和结论 ,给出切片截面内的最大剪应力等值线分布和边界应力分布 .实验应力分析模拟结果与有限元数值法吻合较好 .因此 ,三维光弹性应力二次冻结法是预应力钢筋混凝土结构的实验应力分析中较好的方法     

采用贫混凝土基层的水泥混凝土路面厚度优化

采用贫混凝土基层的水泥混凝土路面是解决重载交通的一种理想路面形式。贫混凝土基层与水泥混凝土面层的不同厚度组合会对路面荷载应力产生较大的影响,考虑实际路面的各种要求,提出了厚度优化的数学模型。利用三维有限元模型,根据在不同结构形式下的合理目标函数,分析了最佳的厚度组合比。     

基于晶粒尺寸的结构钢热变形流变应力数学模型

从晶粒尺寸角度出发，提出晶粒形变度的概念，建立了一个用以描述金属材料热变形行为的数学模型，具有精度高、简单直观、受分界点影响小且计算曲线连续等优点．该模型具有一定微观物理基础，既能描述动态再结晶前的强化阶段，又能描述动态再结晶后软化阶段的热变形流变应力，对两种结构钢的热变形流变应力进行了计算，并与试验值及其他模型的计算结果进行了比较．     

微段渐开线齿轮接触强度与弯曲强度的分析

介绍了微段渐开线齿廓形成过程，从理论上分析了微段渐开线齿廓以凹凸方式啮合时其曲率半径相等及其接触应力嘶很小的原因．同时通过有限元法分析了微段渐开线的弯曲强度，并与相同情形下的渐开线齿轮进行了比较，指出了微段渐开线齿廓的弯曲强度优于渐开线齿廓的原因．