The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

论艺术概括的基本方式和三个层次

艺术概括是塑造优秀文学形象的重要手段 ,它的基本方式是必须融会在个性书写过程中 ,以个性书写为形态。艺术概括包涵三个由浅入深的层次 ,即 ( 1)通过个性概括同类现象的共同特征 ;( 2 )通过个性深入揭示内在本质 ;( 3 )通过个性显示深广的社会意义。达到这三个层次 ,文学形象便可获得深厚的内在意蕴     

铅溴络合物极谱吸附波的研究

本文研究了铅溴络合物在高氯酸－磷酸－草酸介质中的极谱行为。确定底液组成为５％ＮａＢｒ－１１％ＨＣｌＯ４－５％Ｈ３ＰＯ４－０．８％Ｈ２Ｃ２Ｏ４。工作曲线线性范围为０－１５０μｇ／５０ｍｌ检测下限达０．０１μｇ／ｍｌ体系选择性好，应用于实际样品的测定，获得满意结果。     

现代汽车自动变速器的检测试验与故障判定

介绍了现代汽车自动变速器的检测试验方法,总结了根据试验结果判定自动变速器故障的方法。     

Fe_3Al的抗高温氧化和耐热腐蚀性能

在７００℃与８５０℃的高温下，Ｆｅ＿３Ａｌ金属间化合物表面形成了Ａｌ＿２Ｏ＿３保护膜，使其抗氧化性能远优于不妨钢，２％Ｃｒ（原子百分比）加入Ｆｅ＿３Ａｌ会导致氧化过程初期氧化速率的增高，在熔融的硫酸盐和高压锅炉的烟气中，Ｆｅ＿３Ａｌ的耐热腐蚀性能优于高温合金ＧＨ１３２．     

一种对有机废水间接氧化的膜气体扩散阴极

采用膜结构的气体扩散电解作为阴极对染料进行了脱色研究，对膜阴极(MEA)制备工艺以及催化剂进行了探讨，得到了制备MEA的适宜条件。结果表明，使用MEA作阴极，效果远远优于石墨阴极；铂是膜电极的高效催化剂；膜电极制备的优化条件是造孔剂的含量ω=0．30。     

水中酚的催化空气氧化研究

本文研究了水中酚在常压下的催化空气氧化过程。所采用的催化剂为以M_nO_2为主要成份的TGS—3型催化剂。苯酚氧化降解过程用高压液相色谱系统作了分析。同时,经过推导得到苯酚降解的动力学模型。     

离子束增强沉积制备Al、Al－Y薄膜改善304不锈钢抗氧化性能的研究

用离子束增强沉积的方法，在３０４不锈钢表面合成了Ａｌ及Ａｌ－Ｙ薄膜．通过在９５０℃、１０５０℃的恒温氧化和９５０℃的循环氧化实验发现，由于Ａｌ＿２Ｏ＿３保护膜的生成显著提高了３０４不锈钢的抗氧化性，而Ｙ的加入又明显地提高了Ａｌ＿２Ｏ＿３氧化膜的抗循环氧化能力．本文通过ＳＥＭ、ＡＥＳ、ＥＰＭＡ及Ｘ射线衍射相分析等手段，分析了氧化产物层的形貌和组成．并根据实验结果探讨了Ａｌ、Ｙ有益作用的机制．     

低盐重碱中氯化钠含量测定方法的改进

文章针对纯碱企业低盐重碱分析中氯化钠含量难以准确测定这一难题,提出了加大称样量、加热除氨、硝酸中和除二氧化碳的改进方法,并通过实验对改进方法的可行性和准确性进行了验证,取得了满意的效果。