NiTi形状记忆合金振动感知与主动控振研究

分析了复合于基体材料或嵌入机械结构中的ＮｉＴｉ丝对动、静应变的感知性能，基于ＮｉＴｉ形状记忆合金的振动感知和驱动特性，实现了机械系统振动的智能化控制，建立起机械系统的动力学模型。基于机械系统参数时变的特点，应用时频分析方法很好地描述了机械系统非平稳振动响应的过程，结果表明，ＮｉＴｉ形状记忆合金可灵敏地感知动、静应变，并可迅速作出反应，有效控制振动。     

Cl~-对690合金腐蚀电化学行为的影响

采用动电位极化、电化学阻抗、动电位电化学阻抗谱和电容测量等方法研究了690合金在一回路模拟溶液中的电化学行为.极化曲线结果表明:690合金在两种溶液中都存在较窄的钝化区间,在0.5V出现二次钝化现象.电化学阻抗表明,690合金在不含Cl-溶液中的阻抗模值较大,而随Cl-的加入阻抗模值变小.动电位电化学阻抗谱表明,随扫描电位正移,钝化膜在两种溶液中具有相似的变化趋势,动电位电化学阻抗谱与动电位极化曲线完全对应.690合金在0.2V下形成的钝化膜的Mott-Schottky曲线测量表明,溶液中Cl-使得钝化膜中的施主和受主密度增大.     

Co2Ti1-xMxA（X=0,1/4;M=C,Si）晶体的电子结构的第一性原理研究

用广义梯度近似密度泛函和全势能线性缀加平面波方法研究了晶体Co2Ti1-xMxA（lX=0,1/4;M=C,Si）的电子结构.为了更好的了解杂质元素对晶体AlCo2Ti结构的影响,对杂质元素M（M=C,Si）替代晶体AlCo2Ti中的Ti（1/2,1/2,1/2）位进行了对比研究.同时,对杂质元素M（M=C,Si）对晶体AlCo2Ti的晶格常数、体弹模量和原子之间的化学键产生的作用进行了探讨.     

Influence of ECAP on the fatigue behavior of age-hardenable 2xxx aluminum alloy

The fatigue behavior under load control and the mechanical properties of commercial 2011 aluminum as an age-hardenable Al alloy was studied. To estimate the effects of the equal channel angular pressing (ECAP) process, solution heat treatments, and aging on the fatigue life, tests were conducted at four different stages:furnace cooling; furnace cooling plus one ECAP pass; solid solution heat treatment, quenching, one ECAP pass plus aging at peak age level; and the T6 condition. Only one pass was possible at room temperature because of the high strength of the material. The fracture surface morphology and microstructure after fatigue were evaluated by scanning electron microscopy (SEM). The experimental results revealed that the optimum fatigue life under load control, the tensile strength, and the Vickers hardness of the material were interdependent. The optimum fatigue life under load control was achieved by increasing the tensile strength and hardness of the material.     

超声波制备TiO_2光催化降解气相苯的研究

文章以钛酸四丁酯为原料,采用超声波分散450℃焙烧物得到了纳米TiO2光催化剂,以苯为模拟气体,在静态反应装置中考察了该催化剂对气相苯的光催化降解性能。结果表明,采用超声波制备的TiO2光催化剂能显著提高对苯的光催化降解性能,超声波制备的TiO2上苯转化率是搅拌制备的TiO2的1.7倍。BET结果显示超声波制备的光催化剂比表面比搅拌制备的光催化剂高;XRD表征结果表明TiO2呈锐钛型;紫外-可见漫反射结果显示超声波制备的TiO2在可见区吸收增强。     

Preparation of high-strength Al-Mg-Si-Cu-Fe alloy via heat treatment and rolling

An Al-Mg-Si-Cu-Fe alloy was solid-solution treated at 560°C for 3 h and then cooled by water quenching or furnace cooling. The alloy samples which underwent cooling by these two methods were rolled at different temperatures. The microstructure and mechanical properties of the rolled alloys were investigated by optical microscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction analysis, and tensile testing. For the water-quenched alloys, the peak tensile strength and elongation occurred at a rolling temperature of 180°C. For the furnace-cooled alloys, the tensile strength decreased initially, until the rolling temperature of 420°C, and then increased; the elongation increased consistently with increasing rolling temperature. The effects of grain boundary hardening and dislocation hardening on the mechanical properties of these rolled alloys decreased with increases in rolling temperature. The mechanical properties of the 180°C rolling water-quenched alloy were also improved by the presence of β″ phase. Above 420°C, the effect of solid-solution hardening on the mechanical properties of the rolled alloys increased with increases in rolling temperature.     

粉末冶金TiAl基合金高温变形行为

采用等温压缩试验,在变形温度为600～1050℃、应变速率为0.002～0.2s-1的条件下,研究了粉末冶金Ti-47.5Al-2.5V-1.0Cr合金的高温压缩性能与高温变形行为.结果表明:合金在高温压缩变形时,屈服强度随变形温度的升高、应变速率的降低而降低,塑性趋于升高.合金在高温塑性变形时,峰值流变应力、应变速率和变形温度之间较好地满足双曲正弦函数形式修正的Arrhenius关系,说明其变形受热激活控制.在800～1050℃/0.002～0.2s-1范围内,合金应变敏感系数m为0.152,高温变形激活能Q为376kJ.mol-1.     

铝合金激光熔覆

采用大功率激光在铸铝合金的表面熔覆镍基合金粉末,熔覆材料是Ｎｉ６０,Ａｌ包Ｎｉ和Ｎｉ包Ａｌ粉末,基体是ＺＬ１０８。通过研究选出最佳工艺参数范围,对熔覆层进行了宏观和显微组织观察及性能测试。结果表明,Ｎｉ６０熔覆层具有良好的耐磨性和使用性。     

挤压工艺对AK_(4-1ч)合金棒材晶粒大小的影响

通过调整合金成分分别配制了添加Zr,AlTiB ,AlTiC和RE的AK4 1ч实验铝合金 ,经过 2种不同的工艺生产棒材 ,在室温下测量其淬火时效态抗拉强度 ,用金相显微镜和扫描电镜观察和分析了合金在不同加工工艺状态下的显微组织和结构 ,并判定其晶粒度 .结果表明 :在设计合金成分时 ,要精确控制Cu的含量在 2 .0 %～ 2 .6 % ,以免生成难溶的含Cu相 ,降低合金的强度 ;多向强应变可细化晶粒 ,提高合金的力学性能 ;随变形程度的增加 ,晶粒尺寸减小 ;制定挤压工艺时 ,为避免产生周期性裂纹 ,建议挤压比取为 2 5左右     

SPS烧结温度对93W-4.9Ni-2.1Fe合金微观结构及性能的影响

以高能球磨法制备的93W-4.9Ni-2.1Fe复合粉末为原料,采用放电等离子烧结技术制备93W--4.9Ni-2.1Fe合金,研究了烧结温度对钨合金微观组织及性能的影响.采用扫描电镜对试样的断口进行观察,采用能量色散谱仪对合金的组元进行成分分析.结果表明:①烧结温度对合金的性能有显著的影响,在1 350℃时钨合金的抗拉强度达到一个极大值,为981 MPa,此时钨合金的相对密度和W晶粒的尺寸分别为98.9%和5μm;②当烧结温度达到1375℃时,合金中Ni元素开始挥发,随着温度的快速上升,合金中Ni元素的挥发不断加剧,当烧结温度升高至1425℃时合金中Ni元素已完全挥发;③合金的断裂方式随着烧结温度的升高发生显著的变化,当烧结温度升至1350℃时钨合金的断裂方式由W晶粒界面分离向W-W、W-黏结相界面断裂转变,而当烧结温度超过此温度时钨合金的断裂方式又转变为W晶粒的沿晶脆性断裂;④SPS快速烧结能够有效抑制W晶粒的长大,促进钨合金的细晶强化作用.