《三国演义》中的梦境管窥

《三国演义》中的梦分喜梦和凶梦两种，喜梦为帝王预兆和象征，凶梦预兆国家易主或小说中重要人物的死亡，两种梦对人物形象的塑造和故事情节的推动，均有不可忽视的重要作用。     

视频流媒体中源端基本层最佳速率确定算法

精细可扩展(fine grained scalable, FGS)编码是网络视频流行的编码技术之一. 采用FGS编码时, 基本层的速率选择需要在受益客户数量和视频编码效率之间进行折中. 为此, 本文提出了一个源端基本层最佳速率确定算法, 以最大化所有客户的观感体验. 论文首先提出了一个通过实验和曲线拟合建立 R-Q (Rate-Quality)函数曲线的方法, 在此基础上给出了缩小最佳基本层速率搜索空间的定理, 并针对单序列和多序列的不同特点和不问题复杂度, 提出了不同的算法. 针对单视频序化问题, 提出了改进的FGSOPT_N算法, 算法只用到了序列的R-Q函数曲线; 针对多视频序列问题是NP困难问题的实际, 提出了改进的定界MFGSOPT_N算法和改进的贪婪算法MFGS_N以确保找到最优基本层速率, 减少算法运行时间. 针对每种算法, 给出了实例进行算法效果的演示和对比. 结果显示提出的算法能可靠找到最优基本层速率.     

System deployment optimization in architecture design

Optimization of architecture design has recently drawn research interest. System deployment optimization （SDO） refers to the process of optimizing systems that are being deployed to activi- ties. This paper first formulates a mathematical model to theorize and operationalize the SDO problem and then identifies optimal so- lutions to solve the SDO problem. In the solutions, the success rate of the combat task is maximized, whereas the execution time of the task and the cost of changes in the system structure are mini- mized. The presented optimized algorithm generates an optimal solution without the need to check the entire search space. A novel method is finally proposed based on the combination of heuristic method and genetic algorithm （HGA）, as well as the combination of heuristic method and particle swarm optimization （HPSO）. Experi- ment results show that the HPSO method generates solutions faster than particle swarm optimization （PSO） and genetic algo- rithm （GA） in terms of execution time and performs more efficiently than the heuristic method in terms of determining the best solution.     

弹性波散射问题优化PML方法的收敛性

基于频域复坐标拉伸,给出一种解时谐弹性波散射问题的单轴优化完美匹配层(PML)方法.该方法通过在吸收函数中引入一个小参数ε_0,使散射问题优化PML方法的计算不再依赖PML层的厚度.结果表明,当参数ε_0充分小时,优化的PML解指数收敛于原弹性波散射问题的解.     

立式砂仓断面积和高度研究及应用

基于室内实验、集料供排平衡理论、流体动力学理论,提出立式砂仓断面积和高度的计算模型.断面积计算模型的核心是有效沉降速度,通过沉降规律分析,提出有效沉降速度为干涉沉降结束时液面下降高度与沉降时间之比.高度计算模型由压缩层、沉降层、溢流层、储砂空间和稳定放砂高度组成,核心是压缩层高度计算,应用流体动力学理论提出压缩层高度和砂浆浓度的关系式.以某矿立式砂仓为例,计算得到立式砂仓直径D为10 m,砂仓高度H为26.5 m.现场试运行结果表明:砂仓底流体积分数可达44%(质量分数69%),溢流水体积分数控制在3%以下,浓缩效果良好.     

基于沉积数值模拟的辫状河心滩演化

选取黄骅坳陷新近系典型辫状河沉积解剖区,利用密井网区动静态资料相结合识别和刻画心滩及其内部结构,在此基础上通过沉积数值模拟探究研究区心滩形成过程,并建立研究区心滩顺流迁移和横向迁移演化模式。结果表明:顺流加积、垂向加积、侧向加积和侵蚀作用共同塑造心滩的形态和内部结构;滩头侵蚀、滩尾顺流加积和垂向加积形成了心滩的顺流生长和垂向生长;侧向加积与侵蚀作用控制心滩的不对称侧向生长过程。     

保持中度生长势成为建筑外表面绿化的选择策略

针对建筑外表面绿化的特殊性提出了中度生长势概念,分析了生长势和绿化寿命的影响因素并提出了概念模型,进一步结合实验探讨了中度生长势的判定.研究结果将补充和丰富城市特殊生境绿化条件下的植物栽培养护理念,为实现节约、可持续的栽培养护模式,延长绿化生命周期提供指导.     

Physical layer impairments tolerance based lightpath provision in software defined optical network

As all-optical networks grow with ever increasing ultra-high speed, the communication quality suffers seriously from physical layer impairments ( PLIs) .The same problem still exists in software defined optical network ( SDON) controlled by OpenFlow.Aimed to solve this problem, a PLIs tol-erance based lightpath provision scheme is proposed for OpenFlow controlled optical networks.This proposed approach not only takes the OSNR model to represent those linear PLIs factors, but also in-troduces those nonlinear factors into the OSNR model.Thus, the proposed scheme is able to cover most PLIs factors of each optical link and conduct optical lightpath provison with better communica-tion quality.Moreover, PLIs tolerance model is also set up and considered in this work with some necessary extension to OpenFlow protocols to achieve better compatibility between physical layer im-pairments factors and various services connections.Simulation results show that the proposed scheme is able to get better performance in terms of packet loss rate and connection setup time.     

Forming mechanism of ink layer on the printing plate in inking process and influencing factors of its thickness

Ink layer thickness on the printing plate greatly influences uniformity of ink transferred to the substrates , which is an important indicator of printing quality , so the study of ink layer and its thick-ness is important for improving the quality of printing products .Ansys CFX is used here to build a model of ink fluid adhering to lower vibrator roller , form inking roller , and printing plate for analy-zing ink transferring in inking process .Ink layer thickness on each position of the model is acquired to analyze the forming mechanism of ink layer on printing plate , as well as the influence of oscilla-tion speed of lower vibrator roller and dot area percentage of plate on ink layer thickness of printing plate.It can be concluded that , in the case of fixed ink supplying amount , ink layer thickness in-creases along with the increasing of oscillation speed , and decreases when the dot area percentage is getting larger and the minimum is got when the dot area percentage is 100%.At last , experiment of plate inking on print ability tester verifies the correctness of the simulation analysis .     

服装工程师人才培养模式的研究与构建

本文分析国家对工程人才培养的标准和要求,考虑企业对服装人才的需求,体现"突出基础,加强实践,注重创新,持续发展,提倡科技,重视生态,多样优化,国际视野"的学生培养指导思想,结合学校以工科为背景,以纺织服装为特色,及为纺织服装行业培养高级应用型专门人才进行定位,对服装专业的应用型工程师培养模式进行分析和研究,提出"3+1四模块"服装人才培养体系,完成课程体系、实践教学体系、企业培养方案构建,为全面提高服装人才的工程化培养提供了可行的实施办法.