金红石TiO2(011)表面的理论研究进展

基于密度泛函理论 (DFT) 的第一性原理 (First-principles) 计算方法，就金红石TiO₂(011)表面在理论方面的研究进展做了介绍.首先，通过阐述研究金红石TiO₂(011)表面的必要性和实验在其结构方面的研究进展，介绍了金红石TiO₂(011)表面的电子结构和光学性质，指出并验证了该表面对可见光有较强的响应能力.随后，介绍了金红石TiO₂(011)表面的缺陷和杂质，指出吸附H原子和形成O缺陷后还能显著增强其在红外区的红外吸收.在此基础上，不仅从理论上提供了一些传统实验所无法提及的数据资料，还弥补了相关实验在微观领域研究中的不足.最后，就目前金红石TiO₂(011)表面研究中存在的问题做了展望，指出金红石TiO₂(011)表面各种表面现象的微观本质是未来研究的重点内容.     

Flow and heat transfer behaviour of nanofluids in microchannels

Flow and heat transfer of aqueous based silica and alumina nanofluids in microchannels were experimentally investigated. The measured friction factors were higher than conventional model predictions at low Reynolds numbers particularly with high nanoparticle concentrations. A decrease in the friction factor was observed with increasing Reynolds number, possibly due to the augmentation of nanoparticle aggregate shape arising from fluid shear and alteration of local nanoparticle concentration and nanofluid viscosity. Augmentation of the silica nanoparticle morphology by fluid shear may also have affected the friction factor due to possible formation of a core/shell structure of the particles. Measured thermal conductivities of the silica nanofluids were in approximate agreement with the Maxwell-Crosser model, whereas the alumina nanofluids only showed slight enhancements. Enhanced convective heat transfer was observed for both nanofluids, relative to their base fluids (water), at low particle concentrations. Heat transfer enhancement increased with increasing Reynolds number and microchannel hydraulic diameter. However, the majority of experiments showed a larger increase in pumping power requirements relative to heat transfer enhancements, which may hinder the industrial uptake of the nanofluids, particularly in confined environments, such as Micro Electro-Mechanical Systems (MEMS).     

w(Co)对CB2钢显微组织和力学性能的影响

为研究w(Co)对CB2钢微观组织和力学性能的影响，调整CB2钢中w(Co)为0.5%，1.0%，1.5%，2.0%和3.0%.利用光学显微镜(OM)、扫描电镜(SEM)、室温拉伸等检测方法研究w(Co)对试验钢微观组织和力学性能的影响规律，结合Thermo-Calc和JMatpro-7.0模拟结果解释其影响机理.研究发现:w(Co)增加提高铬当量的值，使试验钢中δ铁素体含量减少，当w(Co)增加到1.5%时，δ铁素体基本消失;材料的抗拉强度随w(Co)的增加而增加，而延长率则先增加后降低;结果表明，w(Co)为1.5%时综合性能较好，即抗拉强度达到805.13MPa，延长率达到20.4%，布氏硬度为260.     

木枣多糖的理化特性研究

木枣经超声波辅助酸性缓冲液浸提、醇沉、脱蛋白和脱色工艺制得木枣多糖,测定其溶解性与单糖组成,采用Q2000型差示扫描量热仪和ZX7M-AR1000型流变仪研究木枣多糖的稳定性和流变性,为其在食品工业中的应用提供理论数据支持。实验结果表明,木枣多糖溶于热水,难溶于冷水,不溶于有机试剂；是由鼠李糖、阿拉伯糖、甘露糖、葡萄糖、半乳糖组成的杂多糖。热学特征分析表明木枣多糖具有较好的热稳定性；木枣多糖溶液为非牛顿假塑性流体,表现出剪切变稀的特性；因此木枣多糖适用于在食品生产工业中做稳定剂。     

ePTFE人工血管管壁结构及其体外性能的试验研究

对国内外两组膨体聚四氟乙烯(ePTFE)人工血管从管壁结构、理化性能和生物力学性能进行对比研究.通过试验研究两组人造血管管壁的宏观及微观结构、表面润湿性、结晶度和融熔温度、周/轴向拉伸、顶破拉伸以及手术线固位强力,对比两组样品的性能差异,并分析了导致差异的可能原因,讨论了管壁结构、理化性能与力学特性之间的关系.研究结果表明,国产和进口ePTFE人工血管试样均为双层结构,两者都有良好的疏水性表面和抗水渗透性.但进口试样具有更加规整均匀的节点和纤维形态结构,有利于人工血管的生物耐久性.     

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiC_xN_y–TiB_2)/Ni cermets

In-situ(TiC_xN_y–TiB_2)/Ni cermets with 70 wt%TiC_xN_y–TiB_2 were successfully fabricated by combustion synthesis and hot pressing sintering in Ni-Ti-B_4C-BN powder systems.The microstructures,density,compressive properties,and hardness of the TiC_xN_y–TiB_2/Ni cermets with the addition of 0–8 wt%Cr/Mo to the Ni-Ti-B_4C-BN powder systems were compared and analysed.The results showed that the ceramic particles distributed uniformly in the cermets,and the size of the ceramic particles reduced with the Cr/Mo addition.Both Cr and Mo addition can improve the hardness,compressive properties,and fracture strains of the cermets.The hardness,compressive strength,and fracture strain of the(TiC_xN_y–TiB_2)/(Ni+Cr)cermets increased from 1561 HV,2.94 GPa,and 2.9%to 1864 HV,3.65 GPa,and 3.4%,respectively when the Cr content increased to 5 wt%.The hardness and compressive strength of the(TiC_xN_y–TiB_2)/(Ni+Mo)cermets increased from 1561 HV and 2.94 GPa to 1902 HV and 3.43 GPa,respectively when the Mo content increased to 8 wt%.The cermets with Cr had better compressive properties than the cermets with Mo.     

循环应力对储气库岩石微观结构及力学性质影响数值模拟

针对储气库循环注采过程中循环应力对储气库岩石产生疲劳损伤的问题。利用颗粒离散元法建立岩心真三轴数值模型,根据岩心室内试验标定数值模型参数,然后对数值模型进行多周期等幅值轴向循环应力加载,研究循环应力对储气库岩石微观结构及力学性质的影响。结果表明:循环应力加载过程中,模型内生成的无黏结接触数量和微裂缝数量逐渐增多,而生成位置受原始裂缝控制明显,模型孔隙度逐渐减小,且模型内无黏结接触数量、微裂缝数量和孔隙度的变化速率均呈递减趋势;相同应力水平下模型侧向应变和轴向应变均增大,但侧向应变占主导地位;模型弹性模量逐渐降低,而模型泊松比和损伤量逐渐增加,且模型弹性模量、泊松比和损伤量的变化速率均呈递减趋势。     

A357履带板的半固态触变成形工艺研究

采用半固态触变成形实验,对履带板件进行了模具设计、成形工艺参数制定,成功制得A357铝合金履带板件。并通过拉伸试验和微观组织观察,研究了T6热处理工艺对零件的力学性能和微观组织的影响。试验结果表明:经过T6热处理工艺,过饱和的基体中不断析出强化相Mg₂Si并高度弥散分布在晶粒内部与晶界处,零件的强度得到较大提高。     

Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method

In recent years, graphene has attracted considerable research interest in all fields of science due to its unique properties. Its excellent mechanical properties lead it to be used in nano-composites for strength enhancement. This paper reports an Aluminum–Graphene Nanoplatelets(Al/GNPs)composite using a semi-powder method followed by hot extrusion. The effect of GNP nano-particle integration on tensile, compressive and hardness response of Al is investigated in this paper. It is demonstrated that 0.3 wt% Graphene Nanoplatelets distributed homogeneously in the matrix aluminum act as an effective reinforcing filler to prevent deformation. Compared to monolithic aluminum(in tension), Al–0.3 wt% GNPs composite exhibited higher 0.2% yield strength(+14.7%), ultimate tensile strength(+11.1%) and lower failure strain( -40.6%). Surprisingly, compared to monolithic Al(in compression), Al–0.3 wt% GNPs composite exhibited same 0.2% compressive yield strength and lower ultimate compression strength(- 7.8%),and lower failure strain(- 20.2%). The Al–0.3 wt% GNPs composite exhibited higher Vickers hardness compared to monolithic aluminum(+11.8%).Scanning electron microscopy(SEM), Energy-Dispersive X-ray Spectroscopy(EDS) and X-ray diffraction(XRD) were used to investigate the surface morphology, elemental percentage composition, and phase analysis, respectively.     

朝鲜崖柏生境及高生长规律分析

采用标准地调查法测定朝鲜崖柏的土壤特征、林下植被和高生长规律.结果表明:朝鲜崖柏生长于土层较薄且呈弱酸性的山地暗棕壤,不同标准地林下植被差异明显;不同标准地朝鲜崖柏树高的年生长量均呈逐年下降趋势.