纳米KF/Al2O3催化剂的制备

以纳米γ-Al2O3为原料，采用浸渍法制备纳米KF／Al2O3催化剂，利用XRD、TEM、激光粒度仪等分析手段对所得粉体的晶相组成，粒径分布等性质进行研究。讨论了晶粒大小形状与表面活性剂、溶剂、浸渍温度、干燥方法等因素之间的关系。     

C/GFRP加固混凝土梁受弯性能试验研究

通过三根采用不同纤维(CFRP、C／GFRP和GFRP)正截面加固的混凝土梁和一根对比梁的受弯破坏实验，对比研究了C／GFRP层间混杂形式纤维加固梁的受力特点、破坏形态、合理加固方式、梁体应交情况、承载能力、刚度和变形能力，试验结果表明：采用C／GFRP层间混杂形式纤维加固梁在受弯承载力显著提高的前提下表现出了较好的廷性，这种加固技术切实可行，并可以降低工程造价。     

ABS四轮车辆的Matlab/Simulink建模与仿真

建立了一种四轮车辆制动防抱死系统(ABS)的车辆模型、轮胎模型、路面状况模型和轮速传感器模型，嵌入了气压制动系统和ABS控制逻辑模拟；采用Matlab／Simulink模拟了汽车在直线制动，转弯制动和不同附着系数路面制动的运动状态，为ABS产品的开发提供了依据．     

办公自动化系统中工作流配置软件的设计与实现

办公自动化系统的核心是工作流的定义与配置，分析研究了工作流系统，提出了图形化工作流配置软件的设计思想，并实现了一种基于Lotus Notes/Domino群件体系结构的图形化流程配置软件。     

Solidworks的二次开发技术及其在CAD／CAPP集成中的应用

介绍了SolidWorks的开发环境及其API的对象和方法，并通过具体实例分析了用visual C 进行SolidWorks二次开发的若干关键技术及其实现方法．     

An SNP polymorphism（-844C／T） in the promoter of catalase gene leads to differential expression

Imbalance of redox state has been associated with human diseases, such as cardiovascular diseases, Huntington‘s disease and Alzheimer‘s disease. Catalase, an important antioxidant enzyme, decomposes H202 into O2 and H2O, therefore limiting the deleterious effect of the reactive oxygen species (ROS). Previous study showed that a C-T polymorphism, located at -844 bp from the translational start site of catalase, is strongly associated with essential hypertension in an isolated Chinese population of Xiangchang country, Anhui Province. To explore the impact of SNP-844C/T on the expression of catalase, human catalase promoters containing either SNP-844C or T variant were subcloned into the pGL3Basic luciferase vector.     

基于PSTN的嵌入式水情数据传输系统

介绍一种建立在PSTN上的嵌入式水情数据传输系统的设计方法,该系统以ARM核的32位嵌入式微处理器S3C4480X为硬件平台，采用实时操作系统μC/OS-Ⅱ进行任务的调度和管理，将TCP/IP协议栈嵌入到水情测报仪中，通过电话拨号与网络相连，实现了水情数据的远程传输。     

现代办公自动化系统技术及开发应用

文章研究工作流技术在0A系统中的应用，提出了基于工作流管理的0A系统模型，论述了采用B／S结构体系的优势，最后实现了0A系统的开发和应用。     

端羟基聚d,l-乳酸及d,l-乳酸-ε-己内酯共聚物预聚体的合成

文中研究了端羟基聚d,l-乳酸及d,l-乳酸-ε-己内酯共聚物预聚体的合成方法以及反应温度、单体比、催化剂用量等对预聚体结构的影响.结果表明预聚体合成的最佳反应条件为:n(LA)/n(CL)=8/2,θ=195℃,催化剂质量分数0.3%,还原剂质量分数0.1%,总反应时间31 h.在该反应条件下可合成出结构明确、酸值较为理想、可满足进一步扩链要求的端羟基预聚体.并用羟值分析和GPc等对产物进行了表征.     

Improvement of microstructure and corrosion properties of friction stir welded AA5754 by adding Zn interlayer

This study investigated the effect of Zn foil layers on the microstructure and corrosion characteristics of friction stir welded aluminum alloy 5754. Samples of various joints were prepared by applying different rotational and welding speeds, and their microstructures were evaluated via a metallographic technique and scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy elemental analysis. The anticorrosion behavior of joints in the absence and presence of a Zn interlayer was studied by cyclic potentiodynamic polarization test in 3.5wt% NaCl aqueous solution, and sound welds were obtained in the presence of the Zn interlayer foil. The results revealed that the joint made at a rotational speed of 800 r/min and traveling speed of 15 mm/min achieved a chemical composition identical to that of aluminum alloy 7xxx series, and as such, it showed the best resistance to corrosion.