Surface modification of Ti-45Al-8.5 Nb alloys by microarc oxidation to improve high-temperature oxidation resistance

Microarc oxidation(MAO)electrolysis plasma deposition was used to prepare Al_2O_3coatings on Ti-45Al-8.5 Nb alloys to improve high temperature oxidation resistance.The surface and cross-section morphologies before and after high-temperature oxidation,the chemical composition,and the phase identification of the coatings were investigated by scanning electron microscopy(SEM),electron probe microanalyses(EPMA),and X-ray diffraction(XRD).The results show that Al_2O_3coatings with a thickness of approximately 8μm can be obtained on the Ti-45Al-8.5 Nb alloys by MAO for 600 s.The samples with the Al_2O_3coatings exhibited better high-temperature oxidation resistance.A minimal weight gain of only 0.396 g/m~2after 100 h oxidation at 900°C was observed for the coatings formed with a deposition voltage of 400 V and using a duty cycle of 3%.The deposition mechanism of the Al_2O_3coatings and the effect of the MAO parameters are also described.     

UHPLC-MS/MS法同时测定大鼠血浆中汉黄芩素、隐绿原酸和白杨素-7-O-葡萄糖醛酸苷含量

建立了UHPLC-MS/MS同时测定大鼠血浆中的汉黄芩素、隐绿原酸和白杨素-7-O-葡萄糖醛酸苷含量的方法。以芹菜苷为内标,采用ACQUITY UPLC HSS T3色谱柱(2.1 mm×100 mm, 1.8 μm),乙腈和0.1％甲酸溶液为流动相,流速为0.2 mL·min^-1。结果表明,汉黄芩素、隐绿原酸和白杨素-7-O-葡萄糖醛酸苷线性范围为1～1 000 ng·mL^-1(R2>0.99),最低定量浓度为1 ng·mL^-1,提取回收率、基质效应均符合生物样品分析要求。建立的方法灵敏、准确,可用于大鼠血浆中汉黄芩素、隐绿原酸和白杨素-7-O-葡萄糖醛酸苷的测定及其药代动力学研究。     

SPS预烧结制备超细晶梯度硬质合金

首先采用SPS预烧结和真空预烧结制备超细晶硬质合金,再经过梯度烧结使超细晶硬质合金表面形成梯度层,研究了不同预烧结方式对合金组织的影响,分析了预烧结后合金微观组织对超细晶硬质合金的梯度形成及晶粒生长的影响.结果表明,预烧结后合金的微观组织对梯度烧结后的梯度形成和晶粒生长有较大影响,经过SPS预烧结后的硬质合金进行梯度烧结后,可以获得梯度层厚度为 53μm,平均WC晶粒尺寸为0.3μm的超细晶梯度硬质合金.     

血浆sST2联合NT-proBNP对急诊心衰患者生存状况的预测价值

目的探讨血浆sST2联合NT-proBNP对急诊心衰患者生存状况的预测价值.方法选择急诊心衰患者130例,分为心功能Ⅱ级组、心功能Ⅲ~Ⅳ级组,对照组选择健康的体检者60例.对3组NT-proBNP及血浆sST2水平进行观察对比,对心功能不同分级患者NT-proBNP及血浆sST2水平进行比较,比较NT-proBNP,sST2,NTproBNP联合血浆sST2对心衰患者死亡状况的预测价值.结果随心功能分级递增,NT-proBNP水平逐渐升高,sST2曲线下面积(0.776)及NT-proBNP对死亡判定的ROC曲线与NT-proBNP曲线下面积(0.775)相比较没有明显差异,但二者联合曲线下面积为0.813,与NT-proBNP及sST2曲线下面积相比较差异显著.sST2联合NTproBNP进行心衰患者死亡状况预测时的敏感度为99.0%,特异度为93.2%.结论作为急诊心衰患者诊断、预后和风险评估的主要标志物,sST2联合NT-proBNP对患者生存状况进行评估可以很好地预测患者的生存状况,提高准确度和敏感度,值得在临床上推广应用.     

Bluff body flow-induced noise control with sliding plasma actuators

Sliding plasma actuators were used to control the flow-induced broadband noise radiating from a bluff body. The structure consisted of a cylinder and a torque link that was installed on the lee side of the cylinder. The objective was to reduce the noise generated during the cylinder wake impinging on the torque link. By manipulating cylinder wake with the externally-imposed body force generated by the plasma actuators, the flow-structure interaction was reduced, leading to an attenuation of the broadband noise up to 3 dB in overall sound pressure level at a free stream speed of 30 m/s.     

Atmospheric-pressure Air Plasma Treatment of Polyester Fabrics for Inkjet Printing with Pigment Inks

Without any preprocessing,polyester fabric has lower ability to hold on water and inks due to the smooth morphology of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and bleed easily. Pretreatments of polyester fabric were carried out with atmospheric air plasma under different experimental conditions. After plasma treatment the samples were printed with magenta pigment ink. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyse...     

CHF3／DMCPS比对F掺杂SiCOH薄膜结构及性能的影响

研究了用十甲基环五硅氧烷和三氟甲烷电子回旋共振等离子体沉积的掺FSiCOH低k薄膜中，CHF，／DMCPS比对薄膜结构、成分、介电性能、热稳定性和憎水性的影响．结果表明，随着CHF，／DMCPS比的增大，沉积的薄膜从SiCOH向F-SiCOH和a—C：F：H转变．对于F-SiCOH薄膜，在获得较低介电常数的前提下，薄膜热稳定性和憎水性得到改善．     

基于体动射频信号的睡眠分期

为了减轻传统接触式睡眠生理监测系统对人体造成的负担,设计了一种基于微波技术的非接触式睡眠生理信号采集与分析系统,提出一种基于体动射频信号的睡眠分期识别算法.通过小波变换对射频运动传感器(RFMS)采集的体动信号进行预处理,再计算出体动信号的能量值,最后通过判别式处理和阈值法实现了睡眠分期:醒觉期、浅睡期、中睡期、深睡期.实验采集分析了8个实验者为期46天的睡眠生理信号,同时同步采集视频信息、TANITA水床睡眠信息、接触式呼吸脉搏信号.与视频结果比较发现醒觉期正确率达到90%;与TANITA水床睡眠结果相比,本系统的结果与其吻合程度达到70%;与不同睡眠状态下呼吸率、心率的变化相比,本系统的结果吻合度达到80%.     

基于分段多项式的RF功放预失真线性化新方法

为补偿RF功率放大器的非线性失真,提出一种新的基于分段多项式的自适应数字预失真方法,使用多个直角坐标形式的低阶奇次多项式设计预失真器.分析多种自适应数字预失真方法的计算复杂度,通过Matlab软件仿真它们的收敛速度和线性化效果.该方法计算复杂度低,易于实现.仿真结果表明,该方法收敛速度快,且具有良好的抑制频谱扩展的线性化性能.     

SPS烧结温度对93W-4.9Ni-2.1Fe合金微观结构及性能的影响

以高能球磨法制备的93W-4.9Ni-2.1Fe复合粉末为原料,采用放电等离子烧结技术制备93W--4.9Ni-2.1Fe合金,研究了烧结温度对钨合金微观组织及性能的影响.采用扫描电镜对试样的断口进行观察,采用能量色散谱仪对合金的组元进行成分分析.结果表明:①烧结温度对合金的性能有显著的影响,在1 350℃时钨合金的抗拉强度达到一个极大值,为981 MPa,此时钨合金的相对密度和W晶粒的尺寸分别为98.9%和5μm;②当烧结温度达到1375℃时,合金中Ni元素开始挥发,随着温度的快速上升,合金中Ni元素的挥发不断加剧,当烧结温度升高至1425℃时合金中Ni元素已完全挥发;③合金的断裂方式随着烧结温度的升高发生显著的变化,当烧结温度升至1350℃时钨合金的断裂方式由W晶粒界面分离向W-W、W-黏结相界面断裂转变,而当烧结温度超过此温度时钨合金的断裂方式又转变为W晶粒的沿晶脆性断裂;④SPS快速烧结能够有效抑制W晶粒的长大,促进钨合金的细晶强化作用.