渗硼金刚石薄膜电极用于有机废水降解的实验

为了研究渗硼金刚石薄膜电极电化学性能以及用于含有机污染物的废水处理的可行性,采用循环电解的方法,对含苯酚的废水进行了电化学氧化实验,同时与活性涂层钛阳极进行了对比实验研究,考察了阴极的可替代性,最后用两种电极对含苯胺的工业废水进行了对比实验。实验结果表明,金刚石电极不仅具有优越的电化学性能和优异的电化学指标,而且可以用于电化学废水处理;同时,用钛电极代替金刚石作阴极经济可行。     

论21世纪以来中国喜剧电影中“民间意识”的突显

进入21世纪,中国喜剧电影飞速发展,显示出与以往不同的时代特征.“民间”成分在喜剧电影中逐渐增多,喜剧电影在题材的选择、喜剧效果的营造、小人物形象的塑造等方面都日益突显其“民间意识”.     

正确理解光电效应的基本规律

光电效应的发现和正确解释是物理学史上具有里程碑意义的重大事件。因此，正确理解光电效应的基本规律尤为重要。文章针对教学过程中一些学生甚至教师对光电效应基本规律存在的误解及造成误解的可能因素进行了分析修正。     

Detecting MoS2 and MoSe2 with optical contrast simulation

Optical imaging is a promising method to identify and locate 2D materials efficiently and non-invasively. By putting a 2D material on a substrate, the nanolayer will add to an optical path and create a contrast to the case when the nanolayer is absent. This optical contrast imaging can be used to identify the 2D material and its number of layers. To make the optical imaging process in the laboratories an effective tool, Fresnel Law as a model was used to simulate the optical imaging results of 2D materials(graphene, Mo S2 and MoSe_2) on top of different thickness of SiO_2 and Si wafer in the present investigation. The results provide the details of the optimal conditions(optimal light wavelength and optimal SiO_2 thickness) to identify and locate single to few 2D nanolayers, which can be used directly in laboratories. The optical contrasts of 1–5 layers of molybdenum disulfide(MoS_2) and molybdenum diselenide(MoSe_2) were simulated. To the best of our knowledge, it is the first time that the optical contrast results of MoSe_2 have been reported. In particular, this work highlights the sensitivity of the model on the accuracy of the refractive indices used. It is demonstrated that through computational modeling that optical contrast can allow effective determination of number of layers in few layer 2D materials.     

Optical sensing of explosives in wastewater by competitive complexation

A facile strategy for optical sensing of explosives with the assistance of 1,3,5-Triazine-2,4,6-triamine(MEL) in aqueous solution is proposed. Upon exposure to MEL, the electron-sufficient amino group in MEL was prone to form complexes with electron-deficient nitro group in explosives. The interaction could be tuned by the amount of MEL to fully consumed nitro-contained explosives dissolved in wastewater, thus prevented the gold nanoparticles(GNPs) from combining with MEL. In comparison with common detection method, the dose-response curve procedure reported here was in good linear relationship from 0 μM to 80 μM with good correlation factor(R~2= 0.9871), and was satisfactorily agreed with the proposed theoretical model. The detection limit(Lo D) was1.1 μM by spectrometer, 3.0 μM visualized by naked eyes and 21.3 nM by calculation. The procedure described in this study could be finished within a few minutes and showed its effectiveness in explosive detection upright on the gold surface in real wastewater, making this proposed method a powerful tool in several sensing platforms.     

CHF3／DMCPS比对F掺杂SiCOH薄膜结构及性能的影响

研究了用十甲基环五硅氧烷和三氟甲烷电子回旋共振等离子体沉积的掺FSiCOH低k薄膜中，CHF，／DMCPS比对薄膜结构、成分、介电性能、热稳定性和憎水性的影响．结果表明，随着CHF，／DMCPS比的增大，沉积的薄膜从SiCOH向F-SiCOH和a—C：F：H转变．对于F-SiCOH薄膜，在获得较低介电常数的前提下，薄膜热稳定性和憎水性得到改善．     

采用双等离子体制备非晶态碳膜的研究

采用直流金属磁过滤阴极真空弧(FCVA)制造出Ti和乙炔(C2H2)气体的双等离子体在单晶硅(100)上制备非晶态碳膜.重点研究了乙炔气体和过滤线圈电流对非晶态碳膜的结构、形貌和机械性能的影响.研究结果表明,薄膜中主要成分是TiC,并以(111)作为主晶向;随着过滤线圈电流的增大,薄膜的晶粒度越来越小;薄膜表面的粗糙度逐渐减小,变得更加平整;薄膜的应力减小,可以下降到2.5 GPa.薄膜的显微硬度和弹性模量随着C2H2体积流qV(C2H2)的增大而降低,硬度和弹性模量分别可以达到33.9 GPa和237.6 GPa.非晶态碳膜的摩擦因数在0.1～0.25之间,大大低于衬底材料单晶硅片的摩擦因数0.6.随着过滤线圈电流增大,摩擦因数减小.     

SnAgCu合金粉末的真空蒸镀涂层机理

对SnAgCu合金粉末的真空蒸镀涂层硬脂酸的成膜机理进行了研究.采用扫描电镜(SEM)和透射电镜(TEM)对涂覆后合金粉末的形貌及结构进行观测,采用傅里叶红外光谱仪(FTIR)和X射线光电子能谱仪(XPS)对涂覆后粉末的透射吸收谱和光电子能量进行测试.结果表明:硬脂酸在合金粉末表面形成一层均匀致密、厚度为5～10 nm的薄膜,硬脂酸涂层SnAgCu合金粉末的行为属于物理吸附行为,其生长方式遵循岛状生长机理模式,其过程实质是一个气--固转换、晶体生长的过程.     

热处理条件对IrO2-pH电极性能的影响

在700℃炉冷、870℃空冷和炉冷三种热处理条件下,制备了氧化铱pH微电极,并对比了微电极的线性范围及响应时间.结果表明:热处理条件对Ir氧化物膜的均匀性有很大影响,进而影响其开路电位的稳定性及响应速度.700℃炉冷和870℃空冷制得的电极氧化膜表面粗糙,孔隙率不均匀并伴随有裂纹;而870℃炉冷条件下制得的电极具有表面氧化膜均匀、响应时间短以及线性好等优点.铱氧化物的形成机理是Ir丝被空气中的O2氧化,而高温Li2CO3起到一种溶剂的作用.铱氧化物电极的H+响应是由于电极表面水合氧化铱与溶液中H+发生化学反应,反应为Ir4+与Ir3+之间的转变.     

氮气分压比对硼碳氮薄膜的组分及光学带隙的影响

采用射频磁控溅射方法以不同的氮气分压比(1/10～2/3)制备出一组硼碳氮薄膜.傅里叶变换红外光谱(FTIR)和X射线光电子能谱(XPS)测量发现样品的组成原子之间均实现了原子级化合.XPS测量结果表明,所有样品中的B、N原子比近似为1:1,其化学配比为BCx N(0.16＜x＜1.46).紫外/可见/近红外分光光度计用于测量样品的吸收光谱.由吸收谱线在低能区域(2.0～3.0 eV)的光吸收,利用关系作图法求出光学带隙Eopt范围为0.17～0.83 eV.氮气分压比对薄膜的组分和光学带隙有很大影响,其通过改变薄膜组分而影响光学带隙,并且碳原子数小的样品具有较宽的光学带隙.以氮气分压比为1/3条件下制备的样品中碳原子数最小,它的光学带隙最宽为0.83 eV.