The design analyze of new hybrid drive concept

This paper presents the design method of hybrid drive system for the minibus with some limited conditions. The approach of design hybrid drive system is based on the dynamic modeling and simulation of the hybrid minibus with planetary gear system. The main target of the design is to obtain the optimal design with the proper hybrid drive configuration and control for a given set of design constraints. In oder to meet the design target, it's necessary to adjust some parameters such as mechanical ratios and parameters of battery pack as well as control by simulation. During simulation the transient operating process can be studied in details with the dynamic model in Matlab/Simulink. The control strategy can be optimized by running the simulation and monitoring the operation of each components: the operating area of internal combustion engine (ICE), fuel consumption (energy consumption), the power distribution, the torque and rotary speed of ICE and motor, the operating efficiency of motor, the alteration of battery state of charge (SOC), current and voltage.     

应用Matlab Web Server处理实验数据

物理实验数据的处理方法很多,大多数据处理能力有限,而一些采用Matlab开发的数据处理系统又不具备网络功能。通过具体实例研究了基于B/S结构、利用Matlab Web Server处理物理实验数据系统,解决了Web系统开发程序中数值计算能力较差,特别是结果可视化难点问题,可以实现跨平台应用。用户只借助Web浏览器就可以在Internet上利用Matlab的强大计算功能实现实验数据的处理工作,可以利用其丰富的图形功能而不需安装Matlab软件。应用程序的安装和维护只需在服务器端进行,方便、安全,具有推广价值。     

基于MATLAB与LabVIEW的信号处理分析与研究

针对MATLAB与LabVIEW软件的不同特性,提出利用编程实现和虚拟实验相结合的方式对信号进行处理,并以快速傅里叶变换FFT、信号的滤波,频谱分析为例,说明了这两种软件在信号处理中的特点及优劣性。通过实例表明采用MATLAB与LabVIEW两种软件可以实现动态演示和仿真分析的有机结合,从而可以提高信号处理的快捷性,直观性与可靠性。     

基于MATLAB的IIR数字滤波器的研究

本文介绍了基于Matlab的滤波器设计分析工具（FDATool）的IIR数字滤波器的设计,并通过仿真对所设计的数字滤波器进行验证,达到滤波器设计的最优化。通过实例证明了本方法的可行性和实用性,具有一定的工程应用价值。     

基于粒子群算法最优化Verhulst模型的开采残余下沉预测

矿区开采引起的残余下沉稳定时间长、潜在危害大,有必要准确地预测矿区地表的残余下沉。鉴于传统的残余下沉Verhulst模型建模误差大、适用性弱,在建模过程中以数据序列的首个数据保持不变导致预测效果差的缺陷,以直接离散Verhulst模型为基础,引入粒子群算法寻求模型迭代初始值的最优解,建立基于粒子群算法优化的矿区开采残余下沉直接离散Verhulst模型,并以山西阳泉和山东兖州矿区两个时间尺度的地表残余下沉监测数据集进行实例验证,最后利用Matlab App Designer工具实现模型算法的可视化。结果表明：基于粒子群算法优化的直接离散Verhulst模型的矿区开采残余下沉预测精度和稳定性增益明显,所开发的计算工具具有正确性和有效性。     

P-Fibonacci变换在水印技术中的应用

根据数字水印技术的需要,对水印图像进行置乱。本文提出的P-fibonacci变换简单易实现。根据水印的图像信息自适应的提取P值;满足对任意大小的图像进行置乱,变换后水印信息分布均匀;其图像的还原过程采用矩阵求逆,简单易实现。并给出了Matlab上的实现算法。     

谈Matlab在《复变函数》教学中的应用

本文利用数学软件Matlab强大的数据计算和绘图功能,将《复变函数》教学中涉及的一些典型实例实现了计算机的数据自动计算和图形化显示,直观、清晰的揭示了函数及表达式的数学意义。提高了学生对该课程的兴趣,加深了学生对所学知识的理解,促进了教学效果的提高。     

VC＋＋与Matlab/Simulink混合编程的实现与研究

介绍了将Matlab/Simulink模型转换成目标语言模型的方法。避免了模型仿真速度慢的问题,且降低了目标语言编程建模的工作强度。重点探讨了VC 与Matlab/Simulink进行混合编程的方法,运用这些方法,可以在VC 中方便地使用Matlab/Simulink的数值计算能力。     

基于Matlab/Simulink的多自由度机械振动系统仿真

以一个四自由度机械振动系统为例,利用Matlab/Simulink仿真软件讨论了多自由度机械振动系统的建模方法及仿真分析,重点阐述了振动微分方程和状态空间仿真模型的建立方法及具体运用.该方法既简化了编程的过程,同时也提高了编程的质量和可靠性,为处理类似的多自由度振动系统仿真提供了有效的参考.     

Adaptive compensating method for Doppler frequency shift using LMS and phase estimation

The novel compensating method directly demodulates the signals without the carrier recovery processes, in which the carrier with original modulation frequency is used as the local coherent carrier. In this way, the phase offsets due to frequency shift are linear. Based on this premise, the  compensation processes are: firstly, the phase offsets between the base band neighbor-symbols after clock recovery are unbiasedly estimated among the reference symbols; then, the receiving signals symbols are adjusted by the phase estimation value; finally, the phase offsets after adjusting are compensated by the least mean squares (LMS) algorithm. In order to express the compensation processes and ability clearly, the quadrature phase shift keying (QPSK) modulation signals are regarded as examples for Matlab simulation. BER simulations are carried out using the Monte-Carlo method. The learning curves are obtained to study the algorithm’s convergence ability. The constellation figures are also simulated to observe the compensation results directly.