Bi2Ti2O7薄膜的制备及在栅场效应管中的应用

采用化学溶液沉积法，用价格低廉的原料成功地制备了Bi₂Ti₂O₇介质膜.制膜过程简单，成本低廉，得到的薄膜具有良好的绝缘性和较高的介电常数.用其制备的绝缘栅场效应管与相同尺寸的SiO₂绝缘栅场效应管相比，前者具有较高的跨导和较低的开启电压.     

Preparation and Characterization of Organic/Inorganic Hybrid Nanofibers

A new class of nanocomposites based on organic and inorganic species integrated at a nanoscale has obtained more attention these years. Organic-inorganic hybrids have both the advantages of organic materials, such as light weight, flexibility and good moldability, and inorganic materials, such as high strength, heat stability and chemical resistance. In this work, PVAc/TiO2 organicinorganic hybrid was prepared by sol-gel process. Eiectrospinning technique was used to fabricate PVAc/TiO2 hybrid nanofibers. The structures and properties of the hybrid nanofibers were characterized by Scanning Electron Microscopy （SEM）, Atomic Force Microscope （AFM）, Differential Scanning Calorimeter （DSC） and Fouriertransform infrared （FTIR） spectra. SEM and AFM were employed to study the topography of the hybrid nanofibers. The chemical structure of the hybrid nanofibers were examined by FTIR. The DSC scans revealed the second order transition temperature of the hybrid materials were higher than PVAc.     

Synthesis and Characterization of Titania and Rare Earth Doped Titania Nanoparticles by Sol-gel Process

Titania sol has been prepared by the sol-gel process with Ti（OC4H9）4, as precursor. TiO2 gel was obtained through hydrolysis and condensation process. Rare earth such as La2O3, CeO2 and Gd2O3 were introduced into the nanostructure TiO2. After TiO2 and rare earth doped TiO2 powders were calcined at 400℃, 500℃, 600℃, 700℃ and 800℃ respectively, the characteristic analyses of the TiO2 samples were studied by UV-VIS, XRD and TEM etc. It was found that there are some stringer absorption peaks at 200 - 325 nm. The rare earth doping can increase the phase transition temperature convertin8 anatase phase into rutile phase, can decrease the grain size of TiO2particles and can improve the ann-UV capacity of the coating fabrics.     

新型固体酸催化剂SO42-/Al2O3-Al的制备

采用铝阳极氧化法和浸渍法制备出新型SO42-/Al2O3-Al固体酸催化剂,通过BET,XRD,XPS等物性表征,考察了阳极氧化时间、焙烧温度等对催化剂制备的影响。BET结果表明,催化剂的比表面积要小于载体Al2O3的比表面积;XRD结果表明,载体Al2O3为无定形结构,且负载SO42-后,催化剂的物相结构没有发生改变;XPS结果表明,催化剂表面主要由SO42-和Al2O3组成。活性评价表明,该催化剂对酯化反应具有较好的催化活性。     

微波干燥制备纳米TiO2的光催化降解活性研究

采用钛酸丁酯的溶胶-凝胶法及微波干燥制备了纳米TiO2光催化剂。通过XRD和BET进行了晶型、平均粒径和比表面积分析表征。以水杨酸为模拟污染物对其进行光催化降解活性实验研究表明，UV光照40min水杨酸降解率达到97％，催化剂重复使用4次水杨酸降解率仍能达到94％。     

顺铂联合白细胞介素-2治疗恶性胸腔积液32例

目的：探讨胸腔注入顺铂（DDP）联合白细胞介素-2（IL-2）治疗恶性胸腔积液疗效。方法：58例患者均病理确诊为恶性胸腔积液，随机分为二组，治疗组（32例）在胸腔内注入DDP，白细胞介素-2，对照组（26例）在胸腔内注A．DDP，两组均在1周及2周后各重复注药1次，共3次，观察疗效，毒副反应及生活质量。结果：治疗组总有效率为84．4％，对照组57．7％，差异有显著性（P〈0．015）。治疗组Kamofsky评分〉70分者较对照组有显著提高（P〈0．05），两组在毒性反应上无显著性差异（P〉0．05）。结论：顺铂白介素-2胸腔灌注能有效控制恶性胸腔积液，毒副作用少，联合疗效肯定。     

SiO2掺杂对高温处理后纳米TiO2光催化性能的影响

以钛酸丁酯为原料,用醇盐水解法制备纳米TiO2,用SiO2掺杂纳米TiO2.并对高温处理后的掺杂纳米TiO2光催化活性进行研究。XRD和TEM研究结果表明,SiO2掺杂能有效的提高晶相转变温度,阻止TiO2从锐钛矿型向金红石型的转变和晶粒的长大。实验结果表明,在1050℃高温处理后,SiO2掺杂后的TiO2仍为锐钛矿型纳米晶体。用掺杂纳米TiO2对甲基橙的降解率来表征其光降解性能,SiO2掺杂TiO2在高温处理后依然具有较好的光催化活性,850℃处理后其甲基橙降解率由未掺SiO2时的11%提高到96.48%,晶粒尺寸则由50nm减小到20 nm.     

La3-xYxMgNi14(x=0～2)贮氢合金的相结构与电化学性能研究

系统研究了La3-xYxMgNi14(x=0,1.0,1.5,2.0)贮氢合金的相结构和电化学性能.结构分析表明,合金均由Gd2Co7和Ce2Ni7型结构相组成.随Y含量值x的增加,Gd2Co7型相的丰度增加,Ce2Ni7型相的丰度减少.合金各相的晶胞参数(a,c)和晶胞体积(V)均随x的增加而线性减小.电化学研究表明,随着Y含量的增加,合金电极最大放电容量减小,活化性能显著降低.合金随x的增加,HRD值减小与合金电极电催化活性及氢在合金相中的扩散速率的减小有关.     

N（2，2，0）代数的一类同余分解

对N(2,2,0)代数给出了一类同余分解,探讨了其商代数的代数结构以及自然同态下一类逆象的代数结构.     

四聚1，3．二硫杂环戊烯-2-硫酮冠醚衍生物的合成

以二（碘乙基）醚与4,5．二氰乙硫基-1，3．二硫杂环戊烯-2-硫酮为起始原料，采用氰乙基保护与脱保护技术，通过多步缩合反应以较好的收率合成了含4个1，3．二硫杂环戊烯-2-硫酮并硫杂36冠-12（5），给出了目标化合物的有效合成方法，并用1HNMR，MS和EA对其进行了表征．