大麻纤维的可纺性能及其研究进展

介绍了大麻纤维的化学组成及大麻纤维的结构、性能，分析了大麻纺纱各种方法的利弊，提出了提高大麻纤维可纺性、改善纱线质量的方法。     

各向异性复合材料板混合型裂纹尖端的J-积分

利用叠加原理,将各向异性纤维复合材料单层板混合型裂纹尖端的力学模型-偏微分方程的边值问题化为Ⅰ型和Ⅱ型两个边值问题求解,应用复变函数公式,得到裂纹尖端的应力场和位移场的复形式,将其代入J-积分的一般公式,推出了各向异性纤维复合材料单层板混合型裂纹尖端J-积分的复形式--复变函数积分的实部,再利用柯西-古萨基本定理证明了该J-积分的路径无关性,进而利用柯西积分公式得到它的具体计算公式.     

CFS/GFS层间混杂加固纤维混凝土梁抗弯试验研究

对采用杜拉纤维和钢纤维混杂改性的混凝土梁外贴碳纤维布和玻璃纤维布（CFS／GFS）进行混杂加固抗弯试验，对构件的开裂及发展情况以及构件加固后刚度的变化进行了对比分析研究．试验结果表明，掺入杜拉纤维和钢纤维，可以延缓混凝土构件微裂缝的出现，控制裂纹扩展，提高混凝土材料的强度，这种混杂纤维混凝土梁在试验过程中表现出比单一纤维混凝土梁更为优良的材料性能．采用不同形式的纤维布加固混凝土梁得到的加固效果有较大的不同，按试验方案采用CFS／GFS层间混杂加固纤维混凝土梁是一种有效的加固方法，在保证提高承载力的前提下，既提高了纤维混凝土构件的延性，又可降低加固成本．     

纤维堆囊菌发酵产生埃博霉素条件的优化

埃博霉素是纤维堆囊菌产生的一种具有抗肿瘤活性的次级代谢产物．文中研究了纤维堆囊菌DSM11999发酵合成埃博霉素的条件．结果表明：采用对数生长期后期的菌种在25℃进行发酵，将马铃薯淀粉和胰蛋白胨分别作为碳源和氮源，添加少量的无机盐MnCl4，EDTA—Fe—Na，K2HPO4，ZnCl2，CuSO4和生长促进因子丙氨酸，可使埃博霉素的产量提高22．5％．     

聚砜中空纤维膜乙炔脱湿的研究

采用渗透侧抽真空的方式对膜法乙炔脱湿进行了系统的研究.考察了不同处理量下,渗透侧真空度对渗余气含水量、回收率、分离因子和水蒸气、乙炔渗透通量的影响.当处理量为2.4 mL/s,原料气压力为180 kPa,渗透侧压力为20 kPa时,经过膜分离器处理后的乙炔水含量可由1%降至0.4%以下,渗透气量小于5%,便于循环利用.     

生态型木纤维吸油材料的制备与研究

以杉木为原料,经蒸煮、纤维帚化疏解、热解处理制备出生态型木纤维吸油材料.研究了吸油材料的吸油性能及其与热处理温度、抽出物的关系等问题.结果表明,经过350℃热处理试样的吸油量最大、吸水量最小,吸油量与吸水量比值高达77.5,是原料用蒸煮纤维的10倍以上.蒸煮纤维在200~500℃热处理时,试样的热水抽出物与1%NaOH抽出物含量随热解温度升高而减少,苯醇抽出物含量则在200~250℃时减少,300℃时增大,400℃后急剧减少.研究表明,纤维表面的亲油性物质对吸油能力有重要影响.     

一种改进的阈值分割算法在复合材料图像处理中的应用

针对纤维增强复合材料微观结构图像的特点,提出了一种改进的基于模糊思想的阈值分割算法,该算法利用整体阈值、局部阈值和像点梯度信息之间的关系,构造了一个双输入单输出的模糊逻辑系统,合理计算出像点的最佳分割阈值.实验结果证明了算法的有效性.     

Effects of Some Additives on the Adhesion of Polyacrylamide Sizes to Fibers

IntroductionPolyacrylamide ( PAM) size is one of the sizeingredients that are commonly used in conventionalfor mulations for warp sizing and paper making .It has theproperties of adhering to fibers and can be capable ofholding fiber together by surface attachment . Comparedwith starches and polyvinyl alcohols , PAM possesses suchcapability as excellent adhesion to cellulose fibers . Thiscapability ,however ,is not due to chemical valence ;but isdeveloped only through hydrogen bonds and Van …     

Research on Flax Fiber Reinforced Polylactide Environmental Friendly Composite

Biodegradable polylactide acid （PLA） resin can be combined with flax fibers to produce biodegradable composite materials. In our study, commercial PLA fibers were mixed with flax fibers by a non-woven method so as to make non- woven pre-forms, which can be generated into flax fiber reinforced PLA environmental friendly composites by heat pressing technology. The tensile, flexural and impact properties are tested in order to evaluate the basic physical properties of the composites, and the influenced factors listed as making technology of the pre-forms, weight ratio of flax fibers and heat pressing technology are discussed and optimized, which can be described as weight ratio of flax fibers and PLA fibers is 50/50, heating temperature, time and pressure are respectively 195℃, 20 rain and 12.5 Mpa. Preliminary results show that mechanical properties of the flax/PLA composites are quite promising compared with flax/PP composites in coclrnon commercial automotive use. Scanning electron microscope （SEM） is used to analyze the tensile specimen fracture surfaces, which shows voids and gaps occurring between flax fibers and PLA matrix and sign of fiber pull.out, the strength of flax/PLA interface can be further improved.     

Liquid Flow in Shaped Fiber Bundle

By computation and comparison of the critical spreading coefficient parameter, it was found that shaped fiber bundle is better for wetting. Liquid-air interface tension of liquid arising the shaped fiber bundle body is considered as one critical factor besides liquid viscosity, inertia force and liquid-fiber interface tension. Experimental result simulation demonstrated that the liquid-air interface tension is correlated with the geometric size of the liquid arising in body, Φ0 （x） and which is affected by the cross sectional shape of fiber and the radius of single fiber. The shaped fiber bundle model is/ntroduced to/nvestigate liquid flow in fiber assembly. The model is generated based on a random function for stochastic forming of fibers in bundle and it is necessary to combine this fundamental model with physical explanation for investigation of liquid flow in fiber assembly.