发泡剂 ADC 生成过程传质与动力学分析

在间歇搅拌反应器中进行了发泡剂ADC生产过程传质与动力学研究 .考察了搅拌速度、氯气流量、辅助空气流量、固体联二脲浓度、粒度及反应温度对过程速率的影响 .分析了影响过程速率的主要因素 .研究结果表明 ,发泡剂ADC生产过程涉及极其复杂的气液固多相传递与反应过程 ,其中气相反应物氯气的溶解传质过程是影响整个过程速率的主要控制步骤     

多Agent系统在作战仿真中的应用

针对传统的作战仿真方法的不足,研究了分析复杂系统的一种新方法,即基于A gent的仿真ABS(A gent-based sim u lation),将ABS应用于作战仿真是一种有意义的新尝试。以作战仿真为背景,介绍了作战智能体的模型设计与实现方法,讨论了作战智能体的行为规则与元规则设置。在此基础上,设计实现了一个基于A gent的作战仿真原型系统,模拟出了作战过程中的一些有意义的现象。仿真结果表明,新的研究方法在作战仿真领域具有良好的前景。     

对氮掺杂二氧化钛抗菌剂中氮元素含量测定的不确定度评定

利用有机元素分析仪,对氮掺杂二氧化钛中氮元素的含量进行了测定,评定了其测量不确定度。分析了测定过程中的不确定度的来源,并对不确定度的各个分量进行了评定,给出了测定结果的合成不确定度和扩展不确定度。结果表明:不确定度可表示为(1.21±0.16)%,k=2,其中校准曲线对不确定度的影响最大。     

基于Agent的远程故障诊断系统的实现

对基于知识的多Agent体的远程故障诊断系统进行了研究。建立了一种基于知识的多Agent体的远程故障诊断实验系统，并阐述了实验系统的工作过程。     

蚁群优化的多Agent路由算法及其应用

针对移动Agent在WSN的路由建模的TSP问题,提出了一种基于改进蚁群算法的移动Agent路由算法——MARA-AS。采用伪随机概率选择下一节点,对选择的路径进行局部更新,并在最后一轮循环结束时对最优最差路径进行全局更新。引入一个与节点位置相关的参数w,通过w值移动Agent采用改进蚁群算法访问那些剩余能量高、处理能力强、相邻节点之间距离较大的节点。Matlab仿真结果表明,改进蚁群算法有更好的搜索能力,且与LCF等路由算法相比能减少网络能量消耗和延迟。     

水泥稳定碎石基层收缩裂缝综合防治试验

为了控制反射裂缝,基层材料的性能优化是简单有效的技术途径,采用减少基层材料用水量、降低水泥用量以及降低水的表面张力等方法均有助于减少收缩裂缝的产生．试验结果表明,水泥稳定碎石基层中掺加粉煤灰、减水剂、减缩剂能明显改善基层抗收缩性能,通过采用复合掺加的方法效果更佳．     

Learning Pet -- Intelligent Agents for WBE

An intelligent agent is any program that can be considered by the user to be acting as an assistant or helper, rather than as a tool in the manner of a conventional direct-manipulation interface. An agent should as well display some, but perhaps not all, of the characteristics that are associated with human intelligence: learning, inference, adaptability,independence, creativity, etc.. In order to make webbased education (WBE) more vividly and instructionally with learner's independence at the same time, the intelligent agent can act as a learning pet, which is affiliated with learner's score or grades and will grow up with learner's achievement. And during the course of study, the learning pet can provides any information required by the learner, gives hints if necessary when the learner doing his/her assignment, offers instructional guide for further study etc..     

Generalized Reactive Manufacturing System

Generalized reactive manufacturing system named GRMS is introduced. GRMS is a human-centered system based on Multi-agent. Its management and control organization is made up of three types of agents named device agent, task agent and shop-floor agent. GRMS adopts a top-down and bottom-up competition and cooperation strategy based on the dynamic sifter and funnel . To constrain the behavior of agents, a reward and penalty policy is introduced into the system and the closed-loop adjustment of GRMS is realized through such policy. Agents for the same task should be cooperated with each other and agents for different tasks should compete for survival in the dynamic changing environment. A distributed-hierarchical architecture with three levels of master-slave relationships among agents are proposed. Self-propelled process planning is also discussed. In order to evaluate GRMS, a time-driven simulation system-GRMOSS is developed to check the physical consistency of GRMS.     

荧光增白剂DT的制备及应用

叙述了荧光增白剂 DT的制备过程 ,并说明了 DT的分散原理。还就产品的产率、颜色进行了研究与讨论。对应用工艺也做了系统地介绍 ,提出了使用中应该注意的问题     

静态阻垢法在阻垢剂研究中的改进

对普遍采用的评定阻垢剂效果的方法，静态阻垢法进行了研究，比较了不同的实验药品及操作方法对阻垢率测定的影响，提出了一个重现性好、可信度高的方法。