一个典型C~3I系统的微分方程作战模型的建立

本文针对目前C~3I系统建模研究遇到的难题:如何把C~3I系统的组成内容与它所处的战争环境结合起来,运用复杂系统的一些建模方法、基于问题导向的原则,提出了一套战争环境下C~3I系统建模的规范化建模方法,使C~3I系统与军方常用于描述作战的Lanchester型格斗方程有机地结合起来,形成C~3I系统的作战方程。文中以一个典型的防空作战的C~3I想定进行了具体的计算,建立了该想定的微分方程模型。结果表明,这种方法解决了C~3I系统与Lanchester方程的结合问题,从而使C~3I系统本身的各个组成部分能在模型中与作战环境有机地结合起来。     

野战防空C^3I系统战前辅助决策研究

该文基于野战防空Ｃ￣３Ｉ系统战前决策的内容，提出了一种统一的战前辅助决策的ＭＡＤＭ模型；并讨论了它在实际问题中的应用．     

产普鲁兰降解酶菌株的分离筛选及酶学特性的研究

普鲁兰降解酶(pullulan degrading enzymes)能够专一水解普鲁兰多糖α-1,6-糖苷键以及特定位置的α-1,4-糖苷键,在工业、食品业、医疗保健等行业中具有重要的应用意义.本研究采用唯一碳源法从稻田土样中培养筛选到21株产普鲁兰降解酶的菌株.对菌株A1的鉴定及其产生的普鲁兰降解酶的分析表明,该菌株为气单胞菌属,其产生的酶属于Ⅰ型普鲁兰酶(Type I pullulanase,EC 3.2.1.41),专一水解普鲁兰多糖α-1,6-糖苷键.该酶的最适反应温度为60℃,最适反应pH为6.0,具有良好的温度稳定性和适应性;同时在pH为4.0时仍然保留50%的酶活.进一步对A1菌株产酶的发酵条件(pH、温度、时间)进行了优化,摇瓶中A1分泌表达Ⅰ型普鲁兰酶的水平达到21.2 U/mL.根据已报道的气单胞菌属普鲁兰酶基因的保守序列设计引物,克隆获得了4 053 bp的A1普鲁兰酶基因pluA1全长序列,编码1351个氨基酸.本研究结果为该酶的开发应用奠定了基础.     

宽带数字接收机的I/Q通道失配校正

由于各种因素的影响,I/Q通道之间通常会发生失配现象,影响接收机的性能.分析了幅相误差校正参数的提取方法,提出了基于FIR滤波器的宽带数字接收机的数字域校正方法,研究了校正频点数、校正频点位置对系统性能的影响.仿真结果表明,这种方法能有效提高宽带接收机I/Q通道的正交一致性.     

Facet effect of copper(I) sulfide nanocrystals on photoelectrochemical properties

14-facets polyhedra chalcocite Cu2S nanocrystals were synthesized by a solvothermal method. It was found that the presence of trio-n-octylphosphine during the synthesis was essential for the exposure of unconventional {110} faces. Results from photoelectrochemical measurements indicated that the polyhedra bounded by {110} facets exhibited much higher activities than the Cu2S hexagonal plates with only {001} facets.     

二十五味珊瑚丸中西红花苷I＆Ⅱ的含量测定研究

目的：建立高效液相色谱法测定二十五味珊瑚丸中西红花苷含量的方法。方法：采用HPLC法,色谱柱：DionexC18柱（250ram×4．60mm,5um）;流动相为甲醇-水（52：48）,流速为0．8ml／min,检测波长为440nm,柱温为250C;进样量10μl;用标准曲线法定量,测定二十五味珊瑚丸中西红花苷含量。结果：西红花苷I在33μg-330μg范围内与峰面积呈良好的线性关系（r=0．9999）,西红花苷Ⅱ在62μg-310μg范围内与峰面积呈良好的线性关系（r=0．9998）,平均回收率为103．73％,RSD为1．68％（n=6）。结论：本方法操作简单、重现性好,可用于测定二十五味珊瑚丸中西红花苷I＆Ⅱ含量。     

Lω-空间的Ⅰ型Lω-仿紧性

利用Lω-空间中的Lω-局部有限性质,引进了Lω-空间中的Ⅰ型Lω-仿紧性等概念,系统地研究了Ⅰ型Lω-仿紧性的基本性质,得到了Ⅰ型Lω-仿紧性在弱诱导条件下的一些等价条件.     

Density-based clustering method in the moving object database

With the rapid advance of wireless communication, tracking the positions of the moving objects is becoming increasingly feasible and necessary. Because a large number of people use mobile phones, we must handle a large moving object database as well as the following problems. How can we provide the customers with high quality service, that means, how can we deal with so many enquiries within as less time as possible? Because of the large number of data, the gap between CPU speed and the size of main memory has increasing considerably. One way to reduce the time to handle enquiries is to reduce the I/O number between the buffer and the secondary storage. An effective clustering of the objects can minimize the I/O cost between them. In this paper, according to the characteristic of the moving object database, we analyze the objects in buffer, according to their mappiigs in the two-dimension coordiiate, and then develop a density-based clustering method to effectively reorganize the clusters. This new mechanism leads to the less cost of the I/O operation and the more efficient response to enquiries.     

我说口语结构"我说"

对口语结构"我说"的语音表现、语义特征、句法结构、人称角色的转化及层次重叠等进行多角度分析,确定了消除"我说"歧义的语义条件、句法条件和语用条件,进而初步探讨在口语分析中如何贯彻语法三个平面结合的问题.