结合非线性CS算法的UWB-SAR运动补偿

载机飞行不稳对SAR成像质量影响很大,对超宽带SAR系统尤其如此,提出了一种结合非线性CS算法的超宽带SAR运动补偿方法。通过采用引入高次相位补偿和非正交旁瓣抑制的改进非线性CS算法,减小了超宽带SAR成像中的相位误差。通过成像前的常规一阶运动补偿和距离徙动校正后的分块二阶运动补偿,有效补偿了超宽带SAR中的方位空变运动误差,提高了飞行不稳时的成像质量。该方法在运动补偿时考虑了方位空变运动误差随距离的变化,针对载机运动误差变化较快的情况也给出了处理办法。仿真和实测数据的处理结果验证了该方法的有效性。     

Stability analysis of the simplest Takagi-Sugeno fuzzy control system using circle criterion

A frequency-domain-based sufficient condition is derived to guarantee the globally asymptotic stability of the simplest Takagi-Sugeno (T-S) fuzzy control system by using the circle criterion. The analysis is performed in the frequency domain, and hence the condition is of great significance when the frequency-response method, which is widely used in the linear control theory and practice, is employed to synthesize the simplest T-S fuzzy controller. Besides, this sufficient condition is featured by a graphical interpretation, which makes the condition straightforward to be used. Comparisons are drawn between the performance of the simplest T-S fuzzy controller and that of the linear compensator. Two numerical examples are presented to demonstrate how this sufficient condition can be applied to both stable and unstable plants.     

M带多小波的平衡阶和插值性

对M带多小波,引入了p阶平衡和插值性概念.从频域角度给出了M带多小波的p阶平衡条件.对于具插值性的多小波,证明了其平衡阶和逼近阶是等价的.     

干线协调交叉口多相公交信号优先控制策略

针对干线协调交叉口多个相位有公交车到达的情况,为降低公交车延误,建立了以不破坏协调绿波带为前提的多相位公交优先控制策略.在该策略中,提出了“就近原则”以解决多个相位的公交优先申请冲突,对公交优先级别进行排序,并建立了多相位公交优先控制流程;考虑最高优先级别公交车的不同相位属性,采用绿灯延长和绿灯提前起亮两种优先方式,分...     

深基坑出碴方案比选

深基坑出碴在一些情况下会成为制约工期的关键因素,尤其是复杂地形条件下,在首先满足工期的前提下,还要综合考虑现有机械情况、技术条件和经济效益以及其他作业干扰,这使得深基坑出碴变得更加复杂。文章通过准朔铁路黄河特大桥工程特点,对几种深基坑出碴方案进行了分析对比,综合考虑后选择了履带吊出碴方案。     

有阻尼多跨连续梁在横向激励下的响应

为研究有阻尼多跨连续梁在横向激励下的位移响应,采用整体分析的方法,在BernoulliEuler梁理论的基础上建立求解连续梁的横向振动方程,求得了有阻尼多跨连续梁的位移响应函数,同时求得了有阻尼条件下的固有频率方程和振型函数。     

跳频抗干扰通信系统中LDPC码的编码优化设计

为进一步提升低密度奇偶校验(low-density parity-check, LDPC)编码跳频通信系统抗干扰能力,提出一种对抗部分频带干扰样式的LDPC编码构造方法。首先针对不同干扰因子参数优化了LDPC码字在干扰环境下的度分布序列,然后通过基于渐进边增长和近似环外信息算法构造基矩阵,最后采用改进部分分割移位系数矩阵扩展得到校验矩阵,并结合不等差错保护特性应用到信息位的干扰保护上。该构造方法兼顾优化的度分布和准循环结构。仿真结果表明,所构造的码字性能良好,相同条件下,抗干扰性能优于现行主流类型码字的抗干扰性能。     

基于NB-IoT技术的智能LED灯杆监控系统的研制

针对传统LED灯杆在远程监控、自动巡检、实时单灯调控、故障定位处理等方面存在的问题,本文提出基于窄带物联网(narrow band internet of things,NB-IoT)技术的智能LED灯杆监控系统的研制方案,采用STM32L151单片机作为主控芯片,控制多种传感器采集路灯信息,通过NB-IoT模块与核心...     

Structural,morphological, and optical properties of tin(Ⅳ) oxide nanoparticles synthesized using Camellia sinensis extract: a green approach

Tin oxide (SnO2) nanoparticles were cost-effectively synthesized using nontoxic chemicals and green tea (Camellia sinensis) extract via a green synthesis method.The structural properties of the obtained nanoparticles were studied using X-ray diffraction,which indicated that the crystallite size was less than 20 nm.The particle size and morphology of the nanoparticles were analyzed using scanning electron microscopy and transmission electron microscopy.The morphological analysis revealed agglomerated spherical nanoparticles with sizes varying from 5 to 30 nm.The optical properties of the nanoparticles' band gap were characterized using diffuse reflectance spectroscopy.The band gap was found to decrease with increasing annealing temperature.The O vacancy defects were analyzed using photoluminescence spectroscopy.The increase in the crystallite size,decreasing band gap,and the increasing intensities of the UV and visible emission peaks indicated that the green-synthesized SnO2 may play future important roles in catalysis and optoelectronic devices.     

Mechanical behavior of a near α titanium alloy under dynamic compression: Characterization and modeling

Dynamic compression tests under strain rates from 870 s^?1 to 2100 s^?1 were conducted for a near α Ti–8Al–1Mo–1V titanium alloy with equiaxed microstructure. Compression behavior, adiabatic shearing and band microstructure were investigated via characterization and calculation. The results demonstrate that all dynamic constitutive curves exhibited obvious stress fluctuation phenomenon with double increase-decrease changing stages at the primary stage of compression. The dislocation multiplication theory can be used to explain this phenomenon. After the stress fluctuation period, work hardening coexisted with the thermal softening, resulting in the slow hardening tendency in constitutive curves. J-C model was utilized to quantify the dynamic constitutive curves. The deviations between the predicted and experimental curves under high strain rates may be attributed to the over-consideration of thermal softening effect in J-C model. Adiabatic shearing band (ASB) began to form under the strain rate of 2100 s^?1. A total shearing strain of 8.1 within ASB achieved in 8.9 μs, corresponding to a local strain rate of about 9.1 × 10⁵ s^?1 and is over 430 times of the macro strain rate. Post annealing was conducted on ASB before EBSD characterization. Due to the static recrystallization during annealing, the α phase within ASB generally presented as ultra-fine grains less than 1 μm in diameter.