BN/聚砜导热绝缘复合材料的制备及性能

采用粉末混合法制备了BN/聚砜导热绝缘复合材料,用扫描电子显微镜(SEM)、导热系数测试仪和超高电阻微电流测试仪对复合材料的微观形貌、导热性能和电绝缘性能进行了表征.结果表明:硅烷偶联剂改性处理后的BN粉体与聚砜基体之间的相容性较好;BN/聚砜复合材料的导热系数随BN含量的增加而增大,最大可达2.08(w·m-1·K-1);表面电阻率和体积电阻率随BN含量的增加而减小,最低值分别为0.82×1015Ω和1.78×1015(Ω·cm),具有电绝缘性.     

导电混凝土的研究与应用

导电混凝土是一种特种混凝土,其基本原理是导电材料部分或全部取代混凝土中的普通骨料,它是具有符合规定的电性能和一定的力学性能的特种混凝土.导电混凝土具备热和电的感知和转换能力,这就使得它不仅能作为一种建筑承载材料使用,而且还将在电工、电子、电磁干扰屏蔽、防静电、电加热器、钢筋阴极保护、建筑地面采暖、路面除冰融雪等方面发挥重要作用.目此关于导电混凝土的研究受到越来越广泛的关注.     

晋城电力通信网发展概述

电力通信（电力专用通信网）是现代电力系统不可缺少的重要组成部分，是现代电网安全稳定运行的三大支柱之一。简述了电力通信的意义和作用，以及目前采用的主要通信方式，着重对晋城供电公司电力通信的现状和发展进行了分析。     

三侧向测井电阻率反演

本文针对胜利油田深三侧向测井仪给出了一种由视电阻率反求地层电阻率的快速迭代算法。该算法可推广应用到任何聚焦测井方法中。试算结果表明,计算精度和速度可达到实际应用要求,是一种行之有效的方法。     

利用电力工程进行现场教学

“利用电力工程进行现场教学”是《电工学及电气设备》课教学的一种辅助教学方式。本文对采用这种教学方式的必要性；以及它的产生，发展过程和效果进行了简要的阐述，并附有教学指导书可供参考。     

Effect of La and Co-doping on microstructure and electrical properties of Bi FeO_3 thin films

Adding both La3＋and Co3＋was used to tune the microstructure and electrical properties of Bi Fe O3（BFO） thin films, and Bi1-xLaxFe0.90Co0.10O3 thin films were grown on the Sr Ru O3-buffered Pt-coated silicon substrates by a radio frequency sputtering. A polycrystalline structure with（110） orientation was shown in thin films, and their resistivity dramatically increases as the La3＋content increases. Their dielectric constant increases,and dielectric loss decreases with increasing La3＋content.In addition, their ferroelectric and fatigue properties were enhanced with rising La3＋content. The thin films with x = 0.03 have optimum electrical properties（e.g., remanent polarization 2Pr＊ 175.6 l C/cm2, coercive field2Ec＊ 699.5 k V/mm, dielectric constant er＊ 257 and tan d ＊ 0.038）, together with a good fatigue behavior. The impendence analysis of the films was conducted to identify the defects type during conductivity, and both hopping electrons and single-charged oxygen vacancies are mainly responsible for the conduction of grain and grain boundaries regardless of La3＋content. As a result, the doping with both La3＋and Co3＋benefits the improvement in the electrical properties of BFO thin films.     

The influence of probe lift-up height on CNT electrical properties measurement under EFM DC mode

Nowadays, one of the bottlenecks which hinder the development and application of carbon nanotube （CNT） nano device is that no pure semiconducting CNT （s-CNT） or metallic CNT （m-CNT） can be obtained, and for solving this problem scientists proposed some methods on preparation or separation, but all the results still should be detected and feedback to the process for further improving the preparation and separation methods. Thus, it is very important to measure and distinguish the electrical properties of CNT. For that, scientists proposed a method to measure CNT electrical properties based on DC elec- trostatic force microscope （EFM） mode, which distin- guishes m-CNT from s-CNT according to different scan line shape to CNT with different electrical properties. But, we discovered that the probe lift-up height will seriously affect the shape of the scan line, which makes this method not reliable in distinguishing m-CNT from s-CNT. In this paper, the authors deeply researched the influence of probe lift-up height and also gave corresponding theoretical analysis and explanation, which will greatly improve the method of detecting CNT electrical properties by EFM.     

电工技术实践与教学探讨

针对《电工与电子技术》课程的特点,以提高教学质量和培养学生学习兴趣及能力为目的,在教学内容和方法等方面进行了深入探讨。     

安防监控系统的雷电防护设计

近年来,随着微电子技术的不断发展,安防监控系统在生产生活各个方面的使用越来越广。在实际生活中,人们往往对监控系统的防雷考虑不够,一旦有雷电波侵入,设备损坏一般是巨大的,造成无可挽回的损失。所以,监控设备防雷保护就显得尤为必要。该文以河南省郑州市金域华府为例对监控系统遭受雷击损害的主要原因以及雷电可能的侵入途径进行了分析,进而对监控系统使用中存在的问题现象进行了初步的总结和梳理,提出了监控系统防雷设计问题的相关解决措施,针对监控系统防雷设计应该注意的问题给出了一些建议。     

电工电子实验教学改革探究

电工电子实验中心自成立以来,不断完善及改进,勇于创新改革。中心研究确立了实验平台化的教学体系,制定了多层次化的教学内容,并且引入了先进的现代教学手段及方法,建立了一个虚拟实验教学系统。